Widening and strengthening work of Moradabad Tanda Dadhiyal Road (MDR No. 0-065W) and Manpur Dadhiyal Road (ODR 10) from Ch 25.000 to Ch 46.900 in Rampur district.

Amount

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m -301(3.11) (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. Compaction only (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Construction of embankment with approved material obtained from borrow pits with all lifts and 5 Km. leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader/tractor mounted appropriate equipment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specificatin Clause 401. (i) For Grading I Material (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specifications including premixing the material with water at OMC in mechanical mix (Plant), carriage of mixed material by tipper to site laying in uniform layers With grader in sub-base/base course on well prepared under base and compacting with vibratory-roller to achieve the desired density. Laying using grader (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Providing, laying and spreading of graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% OPC cement and 3.5% Emulsion in uniform single layer on sub base/subgrade and compacting with the road roller to achieve the desire density (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Providing and applying Tack Coat with Bitumen VG-10 using pressure distributor @ 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-40 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Providing and applying Tack Coat with Bitumen VG-10 using pressure distributor @ 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-40 @ 5.40% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisherwith sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507complete in all respects. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per MORT&H specification No 12.1& 304 (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. from the site of work & including watering,dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Brick masonery work in cement mortar 1:3 in foundation complete excluding pointing and plastering, as per drawing and technical specification. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M20 using batching plant transit mixer & manual placing (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant & manual placing (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Painting Two coat over priming coat(but excluding cost of priming coat) on wood or steel snd other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and includjng cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials ,labour ,T&P etc required for the proper complition of the work.(iii) Superior quality including Primer coat and 2 coats plaster of wall putty. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . 1000mm dia NP4 pipe (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . for gool 350mm dia (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Back filling behind abutment, wing wall and return wall with Granular material complete as per drawing and Technical Specification (Including All Taxes, Royalty, Labour Cess, material, T&P etc but excluding GST as applicable)

Raj Shyama Constructions Pvt. Ltd.

M/S SOBTI INFRATECH LIMITED

RCC Developers ltd.