Supply, delivery and fixing of Centrifugal horizontal split casing pumpset of Clear Water pumping to over head tanks at Dowleswaram 10 MLD Plant in RMC.

Supply and delivery of Centrifugal horizontal split casing Pumpset of flow 220m3/hr @ head 25mtr - Suc X Del (150X125), CAST IRON impeller Gland pack pump Coupled with 1440RPM CROMPTON make motor with (IE2) Efficiency mounted on a common base frame. Make of Pumps: Kirloskar or WPIL

Errection charges of above pump including removing of old pumpset and fixing of new pumpset etc., complete as directed by the departmental authorities.

Supply and delivery of DV coupled set Vacuum pump of model DV50 10C4 Coupled set (7.5KW/10HP) Suc XDel -50 X 50, 3Ph, 415V, Gland pack etc., complete

Supply and delivery of 7.5HP 3" Kirloskar make Sewage De-watering Submersible pump etc., complete

Maufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges etc. complete as per the instructions of the Departmental Authorities.

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS-5312 (Pts-182) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring, Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318); Bolts, Nuts with Carbon steel; Gaskets with Rubber, Hinges with Cast steel; excluding transportation and all taxes complete.450mm PN 1.6 MAT-08049 For 150mm NRV

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS: 14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS-1538 including transportation. SSR 2025-2026, (PN 1.6)MPa (MAT-08070) For 150mm Sluice Valve.

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces.

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE -JCIF-5

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron) pipe with Flange 2.5m long enclosed in C.C/brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, ELEC-6.7.5 MAT-04139

Supply of 3 Core 4.0 Sq mm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990. Makes: Finolex, Polycab, Fortunearrt MAT-02796

Fabrication, transportation and and supply of wall mounted control panel board of size 600x 600x 250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter; 0-500 V 96x96mm size. 0 to 20 Amps/050 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 Α ΤΡ, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor above 7.5 HP to 12.5 HP with Star- Delta Starter MAT-03714 (b)

Supply and delivery of Centrifugal horizontal split casing Pumpset of flow 220m3/hr @ head 25mtr - Suc X Del (150X125), CAST IRON impeller Gland pack pump Coupled with 1440RPM CROMPTON make motor with (IE2) Efficiency mounted on a common base frame. Make of Pumps: Kirloskar or WPIL

Errection charges of above pump including removing of old pumpset and fixing of new pumpset etc., complete as directed by the departmental authorities.

Supply and delivery of DV coupled set Vacuum pump of model DV50 10C4 Coupled set (7.5KW/10HP) Suc XDel -50 X 50, 3Ph, 415V, Gland pack etc., complete

Supply and delivery of 7.5HP 3" Kirloskar make Sewage De-watering Submersible pump etc., complete

Maufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges etc. complete as per the instructions of the Departmental Authorities.

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS-5312 (Pts-182) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring, Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (IS 318); Bolts, Nuts with Carbon steel; Gaskets with Rubber, Hinges with Cast steel; excluding transportation and all taxes complete.450mm PN 1.6 MAT-08049 For 150mm NRV

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS: 14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS-1538 including transportation. SSR 2025-2026, (PN 1.6)MPa (MAT-08070) For 150mm Sluice Valve.

Lowering, Keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces.

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete (Reference to specifications BIS No.3114/1994) PHE -JCIF-5

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron) pipe with Flange 2.5m long enclosed in C.C/brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, ELEC-6.7.5 MAT-04139

Supply of 3 Core 4.0 Sq mm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990. Makes: Finolex, Polycab, Fortunearrt MAT-02796

Fabrication, transportation and and supply of wall mounted control panel board of size 600x 600x 250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter; 0-500 V 96x96mm size. 0 to 20 Amps/050 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 Α ΤΡ, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor above 7.5 HP to 12.5 HP with Star- Delta Starter MAT-03714 (b)

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%