PROVN OF BATHROOM AND TOILET BLOCK OF 611 EME BN AND CERTAIN MINOR WORKS UNDER GE (A) AHMEDABAD

Amount

Excavation in trenches n,exc 1.5 mtr deep & wide and getting out in any type of soil and n.exc 10 sqm on plant complet all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggt in foundation, filling, mass concrete complet all as specified and directed.

M&L mild steel TMT bar 10 mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complet all as specified and directed.

M&L mild steel TMT bar 6mm to 8mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complet all as specified and directed.

M&L for Mild steel TMT bar 8 mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complet all as specified and directed.

M&L for use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticla or to batter,surface finished fair complete.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping)

M&L Formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc.

M&L for use and waste for Form work to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and simila rwork exc 10cm but n exc 20cm

M & L for providing reinforced cement concrete M25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed

M & L for providing reinforced cement concrete M25 design mix as in columns, pillars, piers, posts and struts etc complete all as specified and as directed

M & L for providing reinforced cement concrete M25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

M&L brick work with sub class "B" old size bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified.

M&L Damp proof course 40mm In cement concrete 1:2:4, type B-0,to horizontal or vertica surfaces including necessary formwork complete all as specified and directed.

Filling under floor with excavated soil as required from item No 14 above and spreading and levelling in layers including watering and well ramming.

M&L hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick using broken stone complete all as specified and directed.

M & L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) as in sub base of flooring complete all as specified.

M&L for PCC (1:3:6)type C-2 using 40mm graded aggregate 75mm thick as in plinth protection all as specified

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified.

M&L for 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement on ceiling ,chajja etc complete all as specified and directed.

M & L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for 15 mm thick cement plaster in cement mortar 1:6 on concrete or brick surface and finished even and smooth w/o using extra cement

M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured joint free tiles of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 15mm thick Backing coat CM 1:4 complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stylel)consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a VC sheet strip of 20mm width stuck inside with solvlent cement for stiles and plain colour,PVC sheet for top rail,lock rail & bottom rail ,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stlyles and rail with suitable PVC sheet beading and joined together with solvlent cement and fixing in the frame of site as per specification and drawing given in page No 146 of SSR Pt-II (2010)(make Raj shree or equivalent )

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification & drawing complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extlruded section

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F powder coated aluminium ventilator partly louvered and partly fixed with and incl 4 mm thick frosted glass , 0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of frame) complete.

Material & Labour for preparation of new surfaces of wall and applying two coats of cement base paint over one coat of primer complete in all respect as specified

M&l for preparation of newly plastered surfaces of wall and applying three coats of White wash all as specified

M&l for preparation of newly plastered surfaces of Ceiling and applying two coats of White wash all as specified

S&F in repair 110mm bore PVC pipe single socket in any length laid in trenches and floor complete all as specified and directed..

S&F in repair 75 mm bore PVC pipe single socket in any length laid in trenches and floor complete all as specified and directed..

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F in repair PVC bends any radius 110 mm bore complete all as specified and directed.

S&F in repair PVC bends any radius 75 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm dia branch piece, single ‘Y’ equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm dia branch piece, single ‘Y’ equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm dia branch piece, single ‘Y’ double or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm dia branch piece, single ‘Y’ double or unequal complete all as specified and directed.

S&F PVC floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in jointing with solvent cement complete as per direction by Engrin-Charge.

All as per item No 48 above but 100mm dia complete all as specified and directed.

S&F viterous china wash down water closet pan (pedestal pattern) white complete all as specified and directed.

S&F plastic water closet seat cover white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete

S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fush pipe etc compete all as specified.

S&F CP health faucet fixed to water closet any type of WC complete all as specified and directed.

S&F counter Sunk Vitreous china wash basin, white , excluding chain and plug and porcelain stopper but including pillar tap, waste pipe, mounting on granite slab 20 mm thick and fixed with brackets and bottom space make PVC cabinet with handle complete all as specified and directed.

S&F decorative type Mirror of 5 to 6 mm thick with beveled /grind and fixed with studs including 8 to 9 mm thick PVC solid sheet backing and PVC beading/border all around of size as specified and all as directed by Engineer-In-Chagre

S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe complete all as specified and directed.

S&F C.P towel Rail 60 cm long ‘D’ type 20 mm dia complete all as specified and directed.

Supply and fixing for steel water tubing medium grade galvanised incl short length fixed to wall ceiling or laid in floors with all fittings (Such as bends elbow, tee, short pieces, connections back buts dimnishing pieces, caps and plugs union etc) of 15mm bore complete all as specified

All as per srl item No 58 above but 20mm bore complete all as specified and directed.

Supply and fixing stop valves/angle cock 15mm bore cost copper alloy srewed dowh gigh pressure,brass polished finished with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed complete all as specified and directed

Supply and fixing bib taps cost copper ally with crutch or butterfly handles screwed for iorn pipe or for brass derrule and fixed to 15mm bore pipe complete all as specified and directed

Supply and fixing low density PVC connection commercial quality 450mm long incl PTMT nuts at both sides of 15mm bore and fixed complete all as specified and directed.

Supply and fixed pillar taps cast copper alloy with capstan head, chroumim plated fancy type. Screwed down high pressure with or w/o lettered "Hot" or "cold" with long screwed shanks and flynuts of 15mm bore complete.

S&F in repair PVC flushing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed.

S&F 1000 ltr Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity complete all as specified and directed.

S&F vitreous china urinal bowl type ( back or corner wall type and fixing plugs beeding urinal against wall in cement mortar 1:2 securinal plugs with and 60mm long brass screws, pointing arroud urinal backin cement and with grating and union for discharge pipe complete all as specified and directed..

M&L Salt-glazed stoneware gully trap 125/100 mm, setting and jointing with solvent cement

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

M&L for RCC 150mm internal dia Class NP-2 pipe with collars laid in trenches, jointed as specified and as directed by Engineer-in-Charge.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) bedding to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm internal dia of pipe .

M&L for Cutting into existing manholes of RCC 150mm internal dia of pipe for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), smooth finished all as specified.

S&F in repair Precast Manhole rectangular cover 50mm thick, Size 1200x300mm including reinforced and necessary form work complete all as specified and directed.

M&L for Pre Polished Chequered cement concrete tiles 30cm x 30cm x25mm thick,set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F steel work in tubular trusses, purlins, including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240, including distances pieces, base plates, nut bolts etc including complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes, clits etc including welding as necessary conforming to Fe-290 Gde E-165 complete all as specified and directed..

S&F 10mm thick multi wall Polycarbonate sheet of colour as approved, fixed in roofs, wall cladding etc with screw - bolts as per manufacturers instructions complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in hard/dense soil

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concerete complete all as specified

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165

Supply only chainlink fencing any size any type etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

S & F 10 mm dia & over mild steel round or square bars fixed behind chain link fencing as guard bars etc and similar articles complete

S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm complete

S&F rolled mild steel framed work conforming to FE-410-W (Gde E-250) Quality A as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete.

S&F Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, colut nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required.

S&F for 300mm long Mild steel barrel tower bolts, stove enamelled black, with bright bold and fixed complete all as specified and directed.

M&L for providing plaint cement concrete type B1 1:2:4 (20mm graded aggregate) as in benching copings, bed block fixing of hold fast or for filling hollow space of steel chowkhats incl necessary formwork complete all as specified and directed.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed.

M&L for 15mm thick rendering on surfaces other than fair faces of brick / concrete surfaces in CM (1:6) and finished even and fair complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n.exc 1 sqm each complete all as specified and directed.

M&L for providing 75mm thick cemennt concrete type D-2, 1:4:8 (40mm graded aggregate) including necessary form work as in sub base of flooring, complete all as specified and directed.

M&L for machine cut kota stone slab size as in flooring, stair case landing treads of steps etc, 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6 all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.60mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. (Note:- Corrugation colour and shape of sheet shall be approved be GE).

M&L for glazed ceramic coloured tiles of size 300X 200X 7mm in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match 10mm thick Backing coat CM 1:4 complete all as specified and directed.

M&L for 20mm thick Granite (of any size) work (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms and with backing coat of 10mm thick like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade.

S&F sinks made or stainless steel 1mm thick kitchen or laboratory with drainage board over all size 915mmx460mm bowl size 410mmx330mmx160mm fixed in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete all as specified and directed.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F angle holder, insulated polycabonate body with back plate complete.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus as approved.

S&F LED fixture 8 watt including connection all as per Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 or eqivalent in Wipro or Havells or GE Lighting as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

S&F exhaust fan AC single phase, 230 volts, 300 mm sweep with louver metal body including cutting on the existing wall for making provision complete all as per specified and directed. all as per Havells. or equivalent in Almonard / CG / Bajaj as approved.

S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.

M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete.

M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete.

Supply and fix plastic/PVC body desert cooler electric driven (single phase) having nominal air flow capacity of (3500 to 4200 ) cum/hr. Tank Water Capacity 60Litre to 75 Litres. Multi stage air purification & low power consumption . Make :- Symphony /Crompton /Blue star as approved

ALPINE CONSTRUCTIONS