REPAIR AND MAINT TO JCO ORs CIV MD ACCN AT CR CAMP MT COLONY VTC AND GE OFFICE UNDER AGE BR I AT IMA DEHRADUN

Amount

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.

M & L Brick work using sub class “B” bricks (except brick) straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 ( Old size brick) complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc including removal outside IMA premises complete all as specified and directed.

M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured and paid as supply only under respective items separetely.

M&L for Rendering 15mm thick plaster on other then fair faces of brick work or concrete surface in Cement Mortar 1:6 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note- WPC will be measured and paid as supply only under respective items separetely.

M&L for Rendering 10mm thick plaster in Cement Mortar (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.

M&L for 75 mm thick PCC 1;3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded agg) used as sub floor finish the surface to receive to tiles including demolition of existing old cement concrete floors etc complete all as directed.

M&L for 2nd class hard wood scantling clean swan 40 sqcm and over in section fixed with nails in framed work in any position including dismantling existing timber scantling complete all as specified and directed.

Preparing surfaces of wood and wood based materials,new or old, of any description and girth, not otherwise described and treated with Creosote oil complete all as specified and directed.

S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa and 150GSM as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing ACC sheet.

S&F Pre-painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

S& F Steel work in hollow section and tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including dismantling existing timber scantling complete all as specified and directed. MAke- Tata steel, JSW steel, Appolo steel.

Excavation in post holes (similar holes) each n exc 0.5 cm getting out returning filling in and ramming earth or broken boulders mixed with earth around in layers not exc 25 cm watering and removing surplus soil to distance n exc 50 m and making good surface in hard / dense soil.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregade ) in foundation for post holes.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.

S&F 4mm thick E-board false ceiling (Classic) tile size 600mm X 600mm as in ceiling fixed on existing grid including straightening the grid and taking dowan carefully old board complete all as specified & directed.

Complete removing of existing treatment from wall / ceilling by using machenical sander/scrapper complete all as specified and directed. (work to be carried upto a height of 7.50m hig

Prepration of scrapped/ new surface of wall/ ceilling and applying 1.5 to 2.00 mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instructions complete all as specified and directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger/Nerolac) of any tint over a priming coat on wall, chajjas, facia etc with mechanical spray mechine complete all as directed. Note : The work will be carried out upto double storey building.The rate of scaffolding and guarantee for 3 yeas is included for this item also .

Preparation of old plastered/unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger/Nerolac) on walls using machenical means complete all as directed.

Prepration of scrapped/ new surfaces of wall/ ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls using machenical means complete all as specified and directed.

Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm including a pair of brackets, fixed in repair complete all as specified and directed.

S&F Decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod, fixed in repairs complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed

S&F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts etc complete all as specified and directed.

S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . Colour as approved by GE.

S& F Factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter both side laminated of 24mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately. Colour as approved by GE.

S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 etc complete all as specified and directed Colour as approved by GE.

S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . Colour as approved by GE.

S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . Colour as approved by GE.

S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately. Colour as approved by GE.

M&L 35mm thick factory made solid WPC (Wood plastic composit) gauged door shutter brown, single pieces minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size bottom rail 200 to 250mm wide ,middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with 15 mm MS Square tube and covered with PVC moulded bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed. Colour as approved by GE.

S& F 30mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

S&F Steel window factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 5.5mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50 x15 x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 75 x 26 x1.20mm Chowkhat top & sides size: 75 x 26 x1.20mm

S&F Anodised aluminium frame and shutter for ventilators with one or more rebates including joining cleat for fixing etc.including taking down existing ventilators complete all as specified and directed.

S&F 4.0 mm thick frosted/black colour tinted glass ordinary quality and fixed in side aluminium frame exc 0.5 Sqm in each pane complete all as specified and directed.

S&F for decorative aluminium grill weight not less than 3.13 Kg/Sqm (without frame) and 20x20mm aluminium cleat, screwed to main frame/fixed to wall with screws complete all as specified and directed.

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed

S&F factory made 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed

S&F stainless steel butt hinges, 100mm long, medium weight, complete all as specified and directed.

S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 100mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.

Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads/oil putty in squares not exc 0.5 Sqm in each pan, complete all as directed.

S & F 4mm thick frosted glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified.

S&F Taking down steel window shutter n.exc 1sqm and refixing in the same opening after replacement of broken hinges & wire mesh including welding,reveting , grinding, painting etc each complete all as specified and directed Note: -(Wire mesh shall be measured and paid separately under respective items of this BOQ).

S&F Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised of flaps (When open) in 30mm. Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed Make :Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S&F Chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.. Make : Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. Make : Hettich, Hafele, Butterfly

S&F Chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. Make : Hettich, Hafele, Butterfly

S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed. Colour as approved by GE.

S&F 18mm thick WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed. Colour as approved by GE.

S & F Chromium plated Stainless steel wire plate rack of size 30 inch X 30 inch X 10 inch fixed in repair complete all as directed. Make- Nirali, Blue star, Cera.

S&F in repairs PVC tank lid/cover water storage tank lid cover (cylindrical) for 500/1000 ltrs capacity tanks, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450x300 x 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in tile grout to match laid over and including 10mm thick rendring in Cement Mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the IMA premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured tile grout cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured tile grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured tile grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Vitrified ceramic tiles light shade 8-9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M& L for Vitrified ceramic tiles light shade 8-9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,as in vertical surface such as skirting dado and riser to step floor etc set and jointed in tile grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for RCC 1:1½:3 (Nominal mix) (using 20mm graded crushed stone aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20cm Thick for fair finish surface complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe, cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed.

S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe,cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed.

S&F Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in Cement Mortar 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F PVC (SWR) bends in any radius 110mm bore in repairs complete all as specified and directed

S&F PVC (SWR) bends in any radius 75mm bore in repairs complete all as specifed and directed

S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed.

S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed. Make - Cera, Jaquar, Parryware.

S&F 15mm bore CP health faucet with 1.0 M long flexible tube chrome braided with wall hook complete all as directed fixed in repair. Make - Cera, Jaquar, Parryware.

S&F PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed.

S&F Vitreous china wash basin, white, flat back, size 550x400mm including bracket fixed in repair complete all as directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make - Cera, Nirali, Blue Star.

S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make - Cera (Victor Series), Jaquar, Kohler.

S&F 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair. (Minimum weight 15mm-90gms/20mm125gms). complete all as specified and directed. Make - Prayag, Shakti

Supply and fixing in repairs 15 mm bore Pillar cocks chromium plated Swan Neck 15 mm size complete all as specified and directed. Make - Cera (Victor Series), Jaquar, Kohler.

S&F Chromium plated basin inlet connection (angles valve) 15mm dia screwed for iron pipe or brass ferrule, fixed in repair complete all as specified and directed. Make - Cera (Victor Series), Jaquar, Kohler.

S & F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

Repairing to existing door/ window chajjas/ roof slab ceiling upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) including finishing the surface by rendering 10 mm thick plaster in Cement Mortar 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective.

Taking down existing broken portion of upward/ inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area exc 0.50 Sqm but n exc 5.0 Sqm and repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded crushed stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in Cement Mortar 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

Taking down existing broken portion of upward, dowanward / inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area n. exc 0.50 Mtr wide repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded crushed stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in Cement Mortar 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

Demolition carefully old RCC water tank incl RCC base and base beam over double storey RCC roof (cutting reinforcement as required to facilitate demolition) etc in any position, carefully removing demolished material from roof, making good existing roof surface and removal of debris out side MD land complete all as specified and directed.

Demolition carefully old Chimny incl RCC cover over double storey RCC roof etc in any position, carefully removing demolished material from roof, making good existing roof surface including water proofing treatment and removal of debris out side MD land complete all as specified and directed.

M&L for PCC 1:2:4 type B0 ( using 12.5mm graded crushed stone aggregates) as in roof padding in chimni portion, laid in proper slope and finished fair and even,complete all as specified and directed.

M&L for Providing 20mm thick plaster in Cement Mortar 1:4 over concrete roof surfaces, mixed with Water proofing compound (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over old RCC roof including taking down existing plaster on roof complete all as specified and as directed. Note : Water proofing compound (liquid) shall be measured and paid seperately.

M&&L for Roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by A coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by authorised manufacturer laid as per the manufacturer instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete including taking down existing roof treatment the RCC slab, cleaning off all foreign material by wire brushing, cleaning off surface and removal of spoil to a distance exc 500m complete all as specified and directed. Make- STP Ltd, Sikka, Pidilite as approved by GE. Note-1 :- Work shall be executed by authorised applicator only and upto roof height of double storied building. Note : 2:- Work shall be carried out in patches 1 Sqm to 3 Sqm at different bldgs on Chimny and old RCC Tank portion.

Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleanung etc, Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc 250 ltr n.exc 500 ltr capacity including washing with bleaching powder and hoisting if required reconnecting and refixing cleaned tank in position after roof treatmen, complete all as specified and directed.

Supply & fix in repair Sign board made out of 3.00 mm thick aluminium composite panel size 900mmx600mm covered with green colour retro reflective sheet on one side of panel in main portion including writing letters and arrow as per direction with white reflective tap all as directed and shown on ground.

M/S RAJESH KUMAR GOYAL

Alankar Traders

ACE BUILDERS AND CONTRACTORS

M/S S P BUILDERS

Meher enterprises

M/S PUNDIR BUILDERS

M/s Vinod Singh Negi