SPECIAL REPAIR TO OFFRS MD ACCN NOS P 377 4 AND P 75 2 AND REPLACEMENT OF LT OH CONDUCTOR TO LT UG CABLE LT PANEL AT FASF AT MIL STN GADNHINAGAR

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole, laying of cables etc in soft/loose soil and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note: Depth after punning shall be measured and paid.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

Removal of excavated materials soil exc 1.5 Km but not exc 5 Km deposited where directed at a level .

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls.

Supply and laying sub class old 'B' burnt bricks, size of brick 230x115x75mm, laid as cable protection cover complete all as specified and directed.

S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F, factory made, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F, in repairs, butt hinges, 100mm size, medium weight, cold rolled including welding where required complete all as specifed and directed.

S&F, single action spring hinges, mild steel with steel wire spring stove enameled black size of spring hinge 150 mm all as specified and directed

S&F, in repair, single action spring hinges, mild steel with steel wire spring stove enameled black size of spring hinge 150 mm all as specified and directed

S&F, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F mild steel work in weather shed posts, main and cross beams, hip and jack rafters, purlins, including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS 1161-1979, Gde St-240 complete all as specified and directed.

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

S&F, 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screws and washer in roof, wall etc complete all as specified and directed.

S&F, in repair, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for machine cut kota stone slab, 450x600mm ( 18"X24"), 20-25mm thick as in flooring laid over and including cement mortar screed bed of 15mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20-25mm thick black granite stone slab machine cut as in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles any coloured / shed in highligher of size 300mm x 200mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for glazed ceramic coloured tiles any coloured / shed in highligher of size 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on fare faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on fare faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 5mm thick in cement mortar 1:4 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.

M&L for preparing new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparation old plastered onr un-plasterred surfaces and applying one coat of oil bound distemper on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or un-plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

S&F, 5mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each complete all as specified and directed

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed (make- Asian, Nerolac, Berger, Dulux, shalimar)

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

S&F, in repair, concealed stop cock regular body 15 mm with flages complete all as specified and directed

S&F, in repair, Angle cock, cast copper alloy, fency type, chromium plaed crewed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed.

S&F, in repair, CP brass bib cock with capstan head and cup, full turn, screwed down suitable for iron pipe or brass ferrule of 15mm bore complete all specified and directed.

S&F, CP brass wall mixure (hot & cold) with crutch with telephonic hand shower and 1.5m stainless steel tube suitable for 15mm bore fittings complete all as specified and directed.

S&F, CP brass Sink Cock swan neck revolving type suitable for 15mm bore complete all as specified and directed.

S&F, CP brass central hole basin mixer, swan neck revolving type suitable for 15mm bore fitting compelte all as specified and directed.

S&F, CP brass towel rack with 03 Nos sliding hook completed all as specified and directed as per Make of Prayag cat part No. BA-12 or equivalent make as aproved by GE.

S&F, CP brass towel ring with 03 Nos sliding hook completed all as specified and directed as per Make of Prayag cat part No. BA-11 or equivalent make as aproved by GE.

S&F, in repair, corner glass shelf with CP brackets and with decorative railing fixed to wall complete allas specified and directed complete as per Cat No. CAN-1173 of make : Jaquar or equivalent as approved by GE.

S&F, in repair, PVC bath cabinet made from hard thermosetting material with mirror, white/ivory colour, 350 x 450mm size, as pr Cat No. 551 of make prayag or equivalent make as approved by GE.

S&F, in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed.

S&F, in repair, chromium plated, Soap dish holder complete all as specified and directed. Make : Jaquar or equivalent as approved by GE from the makes mentioned in Appx 'C'.

S&F, in repair, health faucet with wall hook and 1.5m PVC hose pipe complete all as specified and directed as pr Cat part No. CE-105 of make Cera or equivalent make as approved by GE.

S&F, in repair, chromium plated toilet paper holder complete all as specified and dreicted. Make Jaquar (Cat No. CAN-1153N) or equivalent as approved by GE.

S & F moduls furniture of PVC shutters of SPUF 128, 20 mm thick colour code D-01 and frames of size 48 x 40 mm (RUPS 414) complete all as specified and directed: Make sintex or equivalent as approved by GE from the make mentioned

S & F PVC sheet SPUF 128 colour code D-01 of Sintex for purposed of shelved fixed with screws on the support of wooden complete all as specified and directed Make Sintex or equivalent as approved by GE from the make mentioned

S & F stainless steel kitchen basket with stainless steel wire perforate plate fabricated and stainles steel sliding guide chanel heavy duty complete all as specified and directed

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F, in repair, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.

Supply only PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls / laid in trenches including stack clamp complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, in repair, PVC (SWR) floor trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F, in repair, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) but including cleaning the sunken portion of WC by demolition and removal of old concrete and provn of roof treatment of sunken floor, new lean cment concrete 1:5:10 type E-2 using 40mm graded, finished even and smooth complete all as specified and directed.

S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

S&F, in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F, kitchen or laboratory sinks made of stainless steel 1mm thick including supply and fix 32mm bore CP waste coupling, plug, washer, 32mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x3mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F, 32mm bore high density polythylene (HDPE) pipes of pressure rting 6kgf/sqm complete all as specified and directed.

S&F, 40mm bore high density polythylene (HDPE) pipes of pressure rting 6kgf/sqm complete all as specified and directed.

S&F, Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed.

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for the following :-

(a) One light/fan /Exhaust point controlled by one switch

(b) One light point controlled by two way switches.

(c) One multi purpose socket 5 Amps, Independent board.

(d) One multi purpose socket 5 Amps, on the same board.

(e) One bell buzzer point controlled by one push buttons independent.

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC concealed conduit of 20mm bore fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed.

S&F, in repair, LED light fitting 1 x 10 W bulk head luminaries including LED driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F, in repair, LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection.

S&F, Modular Switch, 1 way, 6A, 1 module including suitable outer cover complete all as specified and directed.

S&F, Modular Switch, 1 way, 16A, 1 module including suitable outer cover complete all as specified and directed.

S&F, Modular Switch, 2 way, 6A, 1 module including suitable outer cover complete all as specified and directed.

S&F, Modular bell push, 6A, 1 moudle including suitable outer cover complete all as specified and directed.

S&F, Socket, 6A, 2/3 pin combined 2 module type including suitable outer cover complete all as specified and directed.

S&F, Socket, 6A/16A, 2/3 pin combined 2 module type including suitable outer cover complete all as specified and directed.

M&L for ceiling fan step regultor, 120W - 2 module including suitable outer cover complete all as specified and directed.

S&F, in repair, sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 volts 20 Amps complete all as specified and directed.

S&F in repair Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed.

S&F in repair lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

M&L, bell electric, dingdong type AC 230 Volt, single pole complete all as specified and directed.

S &F fix in repair Distribution Board SPN 8 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed. Make -Havells / Legrand / Schneider.

S & F in repair MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting. Make -Havells / Legrand / Schneider.

S & F in repair MCB’s SPN 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting. Make -Havells / Legrand / Schneider.

S&F, in repairs, LED light fitting, batten type, housed in extruded from powder coated aluminium, 20 watt complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed. Make : Wipro / Havells/ Bajaj

S&F, in repir, LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete including taking down old unserviceable cable all as specified and directed of 35 Sqmm 3.5 core sizes of cables.

Supplying & laying, 10 Sqmm, 4 core cable, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete including taking down old unserviceable cable complete all as specified and directed.

S&F, in repair, decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish suitable for 9W LED lamp complete all as specified and directed.

M & L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3. Make - Havells/ Plaza/Polycab

M&L, in repairs, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth strip of 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions;-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 40 mm bore light grade 7.5m

Taking down existing exhaust fan and keeping in safe custudy and rexing the same after complition of work complete all as per specified and directed.

Taking down existing ceiling fan and keeping in safe custudy and refixing the same after complition of work complete all as per specified and directed.

Taking down existing Electric meter and keeping in safe custody and refixing the same after completion of work complete all as per specified and directed.

Taking down existing Geyser and depositing in MES Store yard for keeping in safe custudy and refixing the saem after completion of work complete all as specified and directed.

S&F, in repair, PVC junction box, factory made, with one No SP MCB of 20 Amp rating, class-B connector fixed on pole with necessary clamps and bolts etc duly painted with two coats of aluminum paint over a coat of red oxide primer including connecting with street light cable including taking dowo old complete all as specified and directed.

M&L for horizontal drilling, in any type of soil, by using trenchless technology under the road at least 60 cm below road top suitable for insertion of 50mm bore CI/GI pipe complete all as specified and directed.

Taking down existing panel and Supply, installation, commissoning and testing, LT Panel (415 Volts, 50 Hz , 3-phase, 4 wire supply), plinth mounted, factory made, outdoor type, weather and vermin proof (Protection Class IP-54) made out of 40mm x 40mm x 6mm angle iron frame and 3.00 mm thick MS Sheet CRCA sheet powder quoted with front and back hinged opening, rubber lining, locking arrangement, painted, externally and internally with two coats of synthetic enamel gray paint (First quality) over a coat of red oxide primer, grouting panel, through angle iron, 0.2 mtr in ground and 0.5 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete omprising of the followigs :- (a) Incoming supply:- (i) Aluminium bus bar chmber 200 amps rating of 04 strip - 01 No (ii) MCCB, Thermal magnetic seting, 4 pole, AC, 415 volts, 160 Amp rating, 25 KA rupturing capacity - 01 No (iii) Panel mounted multifunction meter suitable to operate on and incl CT in accuracy class 1.0, suitable 3 Phase CT network CT primary programmable up to 400 Amps, three line baklit display of phase to phase rating Phase to neutral voltage current active power KW, KVAR and KVA, PF Frequency. (iv) Indicating lamp Neon type for R-Y-B - 03 Set (b) Outgoing supply:- (i) MCCB, thermal and meganitic setting, TPN, AC, 415 Volts, 63 Amp rating, 16 KA rupturing capacity - 04 No Note : All MCCBs should be conneted with aluminium strip Bus Bar.

Taking down existing panel and Supply, installation, commissoning and testing, LT Panel (415 Volts, 50 Hz , 3-phase, 4 wire supply), plinth mounted, factory made, outdoor type, weather and vermin proof (Protection Class IP-54) made out of 40mm x 40mm x 6mm angle iron frame and 3.00 mm thick MS Sheet CRCA sheet powder quoted with front and back hinged opening, rubber lining, locking arrangement, painted, externally and internally with two coats of synthetic enamel gray paint (First quality) over a coat of red oxide primer, grouting panel, through angle iron, 0.2 mtr in ground and 0.5 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete omprising of the followigs :- (a) Incoming supply:- (i) Aluminium bus bar chmber 250 amps rating of 04 strip - 01 No (ii) MCCB, Thermal magnetic seting, 4 pole, AC, 415 volts, 200 Amp rating, 25 KA rupturing capacity - 01 No (iii) Panel mounted multifunction meter suitable to operate on and incl CT in accuracy class 1.0, suitable 3 Phase CT network CT primary programmable up to 400 Amps, three line baklit display of phase to phase rating Phase to neutral voltage current active power KW, KVAR and KVA, PF Frequency. (iv) Indicating lamp Neon type for R-Y-B - 03 Set (b) Outgoing supply:- (i) MCCB, thermal and meganitic setting, TPN, AC, 415 Volts, 63 Amp rating, 16 KA rupturing capacity - 04 No (ii) Digital Timer switch of capacity 8.0 kw for street lights - 01 Nos Note : All MCCBs should be conneted with aluminium strip Bus Bar.

Taking out old GI Pipe and Supply and laying GI pipe 50mm dia light grade below road / fixed to along the poles / walls with necessary clamping, including encasing the cable into the pipe all as specified and directed.

ALBA AC AND REF SERVICES