Construction of Modern Toilet at Van Vihar Manali

Amount

Earthwork in excavation by mechanical means (Hydraulic Excavator)/manual means over areas exceeding 30cm in depth ,1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m as directed by engineer in charge for ordinary rock as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Centering and shuttering including strutting, propping etc. and removal of form for : as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Suspended floors, roofs, landings, balconies and access platform as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Lintels, beams, plinth beams, girders, bressumers and cantilevers as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Edges of Slab and breaks in floor and walls as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding he cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : .5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position andbinding all complete upto and above plinth level Thermo Mechanically Treated bars of grade Fe-500D or more. as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Stone soling under floor (Rate as per HPSR 2009) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (second sort), in cement mortar 1:6 (1 cement: 6 coarse sand) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position.2nd class deodar wood. (Rate as per HPSR 2009) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for eparately).Second class teak wood as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Sal wood as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge.Second class teak wood 35 mm thick shutter as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) st class kail wood. 20 mm thick (Rate as per HPSR 2009) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing eaves board 200mm x 25mm thick including fixing in position 2nd class deodar wood. (Rate as per HPSR 2009) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing bright finished brass handles with screws etc. complete:125.mm as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc completeas per direction of Engineer- in-charge. as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600 x 600 mm as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- In-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and repolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with hite cement, mixed with matching pigment, epoxy touch ups, including rubbing, uring, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade Area of slab over 0.50 sqm as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of pproved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the ost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m² as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m² as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre eight, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 tone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for eparately White sand stone - exposed face fine dressed with rough backing 70 mm thick as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

20 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

15 mm cement plaster on rough side of single or half brick wall of mix:

Polishing on wood work with ready mixed wax polish of approved brand and manufacture as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse and (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and routed with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.Rate as per HPSR 2009

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc.1216 (16 mm OD) pipe as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

2025 (25 mm OD) pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 100 mm nominal inner dia Pipes as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Jaguar Brand wall Hung WC with PP soft close seat cover , hinges accessoriescomplete in all respect size 365 x 535 x 360 mm as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Jaguar Brand Sensotronic Sensor concealed type flushing valve for western commode complete set with provision for manual operation also as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Hand shower(Health Faucet) with 6 mm dia 1.20mtr long flexible tube and wall hook with N.R.B. (black flow preventer)complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Urinal with accessories completein all respect size 370 x 315 x 620 mm as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Sensotronic Sensor for urinal with instl box completein all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Angle valve Stop Cock wall flange complete as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal Bore as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Table top Wash basin size 560 x 425 x 170 complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Pillar Cock auto closing syatem complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Toilet paper holder with flaprecessed type complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Smart flow hand dryerwhite complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Jaguar Brand Soap Dispenser push butten type white / smoked complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Paper towel dispenser towel with C/Z folds satin complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Urinal Partion 10 mm curve 450 mm complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Two Way bib cock with wall fleng complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Grab Bar size 842 mm long white complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing Jaguar Brand Single Piece concealed cistern body with installation kit without flush control plate complete in all respect as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110mm X 90mm. (WS and SI Schedule) as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

providing and fixing 100 mm dia C.P. gratring of superior quality for floor , nahani trap as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.(WS and SI Schedule)

Provding supply of rest room cubicle including installation complete (Ref No 899/GILDEL/19-20 complete job as per HPPWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of Engineer-in charge.

RANDHIR JAMWAL

ASHOK RASHPA

DINA NATH

HIMECOPVTLTD