Eloor Municipality- S0442/25- Puthiya Road Park Electrification in Eloor Municipality- Electrification -General Electrical Work

Amount

Electrification

OD92088/2024-2025:Supply, installation, testing and commissioning of 3 MTR height Decorative Hot Dipped Galvanized mild steel step pole with Cast Iron Embellishments between steps, pole made of mild steel /steel tube complied with IS 1161/IS 3601, minimum of not less than 2.9 - 3.2 mm thickness. Pole shall have two sections, bottom section shall be minimum height of 1 mtr with dia of the pipe shall be 140 mm and bottom section having dia of 140 mm having thickness of 3.20 - 3.40 mm. The upper section shall be not less than 2.0 MTR with minimum dia of 76 mm. The Pole is to be provided with a suitable surface mounting base plate and welded at the bottom of the pole. Mild steel base plate of Ø 268 mm with 4 no. elliptical holes of 20 x 42 mm on 210 mm PCD suitable for M12 bolts. The pole shaft and base plate shall be hot dip galvanized (7 Stage process) as per IS 2629 Grey UV stabilized pure polyester powder coated finish. The Pole shall have in-bult junction box/control box with suitable connector for cable /wire loop in loop out connection , 2A SP MCB etc . The complete structure shall be hot dip galvanized and marine grade treated.CAT REF: Make : Havells 3 M 76 MM GI ECO Pole no. LSS LOG 0153 or equivalent make including suitable foundation bolts and nuts. fixed on existing CC foundation .

OD92802/2024-2025:Supply , conveyance ,installation, testing and commissioning of Decorative classic post top LED Post top lantern 70W, powered by built in isolated potted electronic LED driver with APFC with lower THD output short/open circuit protection , surge protection up to 10 Kv with external SPD , made of Die cast aluminum housing with heat sink for efficient thermal management and excellent corrosion resistant. Al canopy with classic design for aesthetic view , Epoxy powder coated black after phosphocromate treatment . High efficiency long life LED module with SMD LED package mounted on MCPCB lumen efficiency of not less than 155 lumen/W . High quality UV stabilized polycarbonate opal cover for LED module to provide glare free light etc. make Havells TYCOONPT70WLED or equivalent make .

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

OD92617/2024-2025:Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel .

90.12.5.39:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 6 sq mm

90.12.7.39:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

OD290098/2024-2025:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 1.50 sq mm with factory made clamp

90.12.12.2:Supply & laying of DWC pipe in ordinary soil 1.2 m below ground level including excavation50/38 mm or nearest size

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

OD92782/2024-2025:Supply and fixing 10W Integral type Bulk head fixture on wall/ceiling and giving connections

OD92163/2024-2025:Supply Conveyance, installation, testing and commissioning of 30W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled /Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV, and Aluminum pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separately accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD290099/2024-2025:Supply , conveyance ,installation, testing and commissioning of Decorative post top LED lantern 35W , IP65 consisting die casting aluminum body for mounting LED driver and spun aluminum canopy painting pure polyester UV protected powder coated matt black finish after phosphochromate treatment , high quality polycarbonate cover , built in potted ,isolated electronic LED driver with APFC ( SMPS based constant current supply ) with lower THD, output short/open circuit protection, over voltage protection, surge voltage protection up to 10 kv with SPD and other tests, Model: Havells make RUBYPT35LED or equivalent make .

90.16.2.5:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.50 mm dia. G.I. pipe (medium class)

1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

90.11.1.14:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

90.6.5.2:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 0.75 sq mm

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

90.16.1.10:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG)

5.7:Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

OD92197/2024-2025:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.4 X 6 sq. mm (22mm)

15.4.2:Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On &OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete ad required2 output per phase and suitable for single phase supply.

OD92221/2024-2025:Supply and providing 2 pole power contactor with necessary NO/NC contacts suitable for street light switching arrangements

OD92784/2024-2025:Supply and providing 4pole power contactor with necessary NO/NC contacts suitable for street light switching arrangements

OD92165/2024-2025:Supply and fixing Hot press molded SMC meter box size 450x375x200 mm Sintex make GS-MB- 4537 or equivalent make

OD92222/2024-2025:Supply and providing thermoplastic out door type meter board of size 315x450x214 mm or nearest size IP 65 with double compartment with hinged and transparent door and fixing on wall or existing pole etc. Hansel or equivalent make .

OD92167/2024-2025:Supply and fixing 63 A Fuse unit with HRC link on existing board using suitable bolt , nut and giving connections

OD92166/2024-2025:Supply and fixing 63 A 2 way neutral link on SMC or DMC base and giving connections

OD92223/2024-2025:Supply and providing 4 pole (3P+N) Type 2 Surge protection Device 15 kA rated conforms to IEC 61643-11 L and T make Cat. no: AUSP023PN15 or equivalent and giving connections

OD92790/2024-2025:Supply and fixing hot press molded SMC junction box Sintex make GS-JB-1510 size 155x100x60 mm or nearest size on wall using necessary screws /bolt and nut

OD290100/2024-2025:Supply and providing 16A 8 way terminal connector on existing box and giving connections

OD92164/2024-2025:Supply and providing 8/10 mm SS hook

OD290125/2024-2025:Supply and providing metallic support for fixing light fixtures using suitable Channel/ Angle/ flat / square or rectangular pipe welded together and painting two coats of synthetic enamel paint over a coat of red oxide primer .

Edward P J (BID ID -2035853)

Kittu Electricals private limited (BID ID -2035756)

Bidder Name

Kittu Electricals private limited

Edward P J

GK INDUSTRIES