Supply and Fixing of High Mast Light for various places in area of Nagar Palika Itawa.

Amount

Supply, erection testing & commissioning of high mast lighting system (as per CP3-TRT/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for upto 12 nos. luminaries, mast head assembly, two nos. aviation obstruction neon lights, double drum type self sustaining winch, integral power tool (winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, suitable ropes and CC foundation of M-15 grade complete as required. The mast is constructed from mild steel plates (as per BS-EN 10025) cut and folded to form a polygonal section, telescopic jointed & welding as per BS 5135. The complete work shall be supervised & certified by the manufacturers for satisfactory supply, erection, testing & commissioning of high mast with all accessories, which also includes internal electrical cable & panel with foundation, erection & commissioning excluding luminaries & lamps. Group–I. 16 mtr. HM (in 2 section)

P & F of IP-66 protected high power LED flood light system with extruded aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85% and in compliance to IEC standards. System life of 50000 burning hours with 70% of initial lumen be maintained. Light output in red, green, blue, cool white or warm white colour as per engineers choice. Fixtures shall be CE compliance. High power LED flood light 160 watt Group–I.

Providing and laying XLPE/PVC insulated & PVC sheathed Un-armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 Cm×75 Cm size trench 25 Cm thick under layer of sand and second Class bricks covering 2C × 2.5 sq.mm Group-I

Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Unarmoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cm×75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 16 Sqmm 4 core Group - I

Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 16 Sqmm 4 core Group - I

Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150-200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper type to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm×300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80-100 micron G.I. coating G.I. pipe 3000 mm long, 80/40 mm, terminal 14 mm G.I. strip Group - I

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 25mm × 3mm G.I. Strip Group - I

S & Laying following size 'A' class G.I. Pipe with accessories for laying earth conductor/strip in ground/surface/ recess as required 50 mm dia. Group–I

Jain Trading Company