Inclusive Streets Street Furniture Signages Markings Universal access Inclusive Streets and Stairs Phase IV

Amount

Dismantling of existing structures by Mechanical Means like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead as per direction Of Engineer In Charge.

Dismantling of existing structure of Brick Work In Cement Mortar like culverts, bridge, retaining wall and other structure comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202

Dismantling of existing structure of Rubble Stone Masonry in Cement Mortar like culverts, bridge, retaining wall and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.

Dismantling Steel work in all types of section upto a height of 5 m above plinth level excluding excluding dismembering & cutting of rivet as technical specification clause 202.

Dismantling of Kerb Stone Channels by manual means and disposal of dimantled material with all lifts and upto a lead of 1000 m as per Technical Specification Clause 202

Excavation in al kind of soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with upto all lift and a lead upto as per Technical Specification Clause 1603.1

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, upto all lead and lift of all kinds of soil for pipes, cables etc. etc. exceeding 300 mm dia but not exceeding 600 mm

Earth work in excavation of foundation in Hard Rock (blasting prohibited) by mechanically of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing and laying cement concrete mechanically mixed 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) curing complete including cost of form work in foundation and plinth including carriage of material upto all leads and lifts and as per direction of Engineer in charge.

Plain cement concrete M10 grade of nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days inlcuding cost of formwork with carriage of material upto all lead and lift as per direction of Engineer In Charge.

Plain/Reinforced Cement Concrete M15 in Open Foundation complete as per Drawing and Technical Specifications inlcuding cost of formwork with carriage of material upto all lead and lift as per direction of Engineer In Charge.

Reinforced Cement Concrete (RCC Grade M20) in Open Foundation complete as per Drawing and Technical Specifications inlcuding cost of formwork with carriage of materail upto all lead and lift as per direction of Engineer In Charge.

Reinforced Cement Concrete (RCC Grade M25) in Open Foundation complete as per Drawing and Technical Specifications inlcuding cost of formwork with carriage of material upto all lead and lift as per direction of Engineer In Charge.

Reinforced Cement Concrete (RCC Grade M30) in Open Foundation complete as per Drawing and Technical Specifications inlcuding cost of formwork with carriage of material upto all lead and lift as per direction of Engineer In Charge.

Providing, shifting and placing precast Rectangular drain cover M25 grade of concrete including reinforcement having size (1000x850x125)mm, with 50mm PVC pipe for perforation, including carriage of material upto all leads and lifts and as per direction of Engineer In Charge.

Supplying, fitting and placingTMT bar Fe-500 reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 inlcuding carriage of material upto all lead and lift as per direction of Engineer In Charge.

Steel work welded in built up/hollow sections / framed work, including cutting, hoisting, fixing in position :-In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works,Painting and priming work shall be paid seperately.

Providing and laying heavy duty natural cobble stone 100x100x80mm laid over 25mm average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and i/c pointing and curing rubbing & polishing complete as per the design patteren and colour approved (Sub base concrete floor to be paid for separately), including carriage of material in all leads and lifts and as per direction of Engineer in Charge.

Providing and laying 80mm thick heavy duty precast cement concrete inter locking coloured paver blocks vibro compacted upto M-40 grade i/c border or kurb block grey or colored over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately)

Providing and laying 60mm thick heavy duty precast cement concrete inter locking coloured paver blocks vibro compacted upto M-35 grade i/c border or kurb block grey or colored over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Providing and laying reinforced cement concrete pipe NP3 600mm dia for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. inlcuding carriage of material upto all lead and lift as per direction of Engineer In Charge.

Supplying and laying of 120 mm dia (OD-120 mm & ID-103 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) excluding excavation and refilling the trench sand cushioning and protective covering etc, complete as required inlcuding carriage of material upto all lead and lift as per direction of Engineer In Charge.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.:- on Steel Works, inlcuding carriage of material upto all lead and lift as per direction of Engineer In Charge.

Stone soling for road work properly hand-packed filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 150 mm spread thickness (finished work including materials and labour), inlcuding carriage of material upto all lead and lift as per direction of Engineer In Charge.

Providing and filling, boulder filling behind retaining wall including carriage of material in all leads & lifts and as per direction of Engineer in charge.

Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 110 mm dia PVC pipe (weight should not be less than 4kg/cm2), extending through the full with of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, including carriage of material in all leads and lifts and as per direction of Engineer in Charge.

DEEPAK JOSHI

sanjeev singh govt contractor