Jal Jeevan Mission (JJM)-JJM ERUMELY PANCHAYATH-Supplying,laying and providing pipelines in uncovered areas and balance works of pre closed packages-PACKAGE 8-Pipeline Work

Work Name:Jal Jeevan Mission (JJM)-JJM ERUMELY PANCHAYATH-Supplying,laying and providing pipelines in uncovered areas and balance works of preclosed packages-PACKAGE 8-Pipeline Work

by mechanical means and carrying out the excavation.à15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)cumÉ
100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.Ç
100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock. á
100.2.7:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in Medium Rock where Blasting is Prohibited. à
100.1.13:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in Hard Rock where Blasting is Prohibited. ”
100.4.1:Excavating in hard rock for trenches by blasting for laying pipes and stacking useful materials for measurements and disposing unserviceable materials within the initial lead of 50m and lift up to 1.50m (depth from 0.0m to 1.50m) and providing protection by earth filled cement bags during blasting to avoid damages to nearby structures (200 Nos. of earth filled cement bags for 10m3 of blasting)¤100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.­100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.º100.14.6:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 350mm diameter Ductile Iron Class K-9 Pipes.º100.14.4:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 250mm diameter Ductile Iron Class K-9 Pipes.º100.14.2:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 150mm diameter Ductile Iron Class K-9 Pipes.B
100.37.10.1:In situ fabrication of M.S. pipes of size 350mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.A
100.37.8.1:In situ fabrication of M.S. pipes of size 250mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.A
100.37.6.1:In situ fabrication of M.S. pipes of size 150mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.p
100.9.11:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 160 mm nominal outside diameter pipes.o
100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.n
100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the tren

敲摡⁹慭敤‬汰捡湩⁧湩瀠獯瑩潩污杩楮杮琠敨瀠灩汥湩⁥潴琠敨氠湩獥愠摮氠癥汥⁳湡⁤潪湩楴杮琠敨瀠灩獥愠摮猠数楣污⁳楷桴猠汯敶瑮挠浥湥⁴湡⁤整瑳湩⁧桴⁥楰数楬敮眠瑩⁨慷整⁲潴琠敨爠煥極敲⁤整瑳瀠敲獳牵⁥攨捸畬楤杮挠獯⁴景瀠灩獥愠摮猠数楣污⥳›〹洠潮業慮畯獴摩⁥楤浡瑥牥瀠灩獥渮
〱⸰⸹㨶慌楹杮甠噐⁃楰数⁳景挠慬獳㈠琠汣獡⁳‶湡⁤灳捥慩獬‬潬敷楲杮琠桴⁥牴湥档獥愠牬慥祤洠摡ⱥ瀠慬楣杮椠潰楳楴湯愠楬湧湩⁧桴⁥楰数楬敮琠桴⁥楬敮⁳湡⁤敬敶獬愠摮樠楯瑮湩⁧桴⁥楰数⁳湡⁤灳捥慩獬眠瑩⁨潳癬湥⁴散敭瑮愠摮琠獥楴杮琠敨瀠灩汥湩⁥楷桴眠瑡牥琠桴⁥敲畱物摥琠獥⁴牰獥畳敲⠠硥汣摵湩⁧潣瑳漠⁦楰数⁳湡⁤灳捥慩獬㨩㘠″浭渠浯湩污漠瑵楳敤搠慩敭整⁲楰数⹳ɰ㄀〰ㄮ⸰㨲慌楹杮䠠偄⁅楰数⁳䤨⁓›㤴㐸 湯氠湡⁤潰瑲潩湩汣摵湩⁧潣癮祥湩⁧楷桴湩椠楮楴污氠慥⁤湡⁤污杩楮杮琠敨瀠灩獥‬汥捥牴ⵯ畦楳湯眠汥楤杮甠楳杮愠瑵浯瑡捩漠⁲敳業愭瑵浯瑡捩攠敬瑣潲畦楳湯洠捡楨敮ⱳ琠獥楴杮琠敨瀠灩汥湩⁥桴獵映扡楲慣整⁤潴猠極⁴桴⁥票牤畡楬⁣潷歲湩⁧牰獥畳敲愠摮愠瑦牥琠獥楴杮‬污杩楮杮琠敨瀠灩汥湩ⱥ氠睯牥湩⁧桴⁥楰数椠潰楳楴湯椠瑮桴⁥牴湥档獥愠牬慥祤洠摡ⱥ琠獥楴杮琠敨氠湩⁥潴猠極慴汢⁥牰獥畳敲眠瑩⁨潰慴汢⁥慷整⁲敢潦敲戠捡楦汬湩⁧湡⁤敬敶汬湩⁧桴⁥牴湥档獥椠据畬楤杮愠汬氠扡畯⁲档牡敧‬楨敲映牯愠灰楬湡散⁳瑥⹣‬潣灭敬整戠瑵攠捸畬楤杮挠獯⁴景瀠灩⁥湡⁤楦瑴湩獧›ㄱ洰潎業慮畏整⁲楄浡瑥牥倠灩獥漮〱⸰〱ㄮ䰺祡湩⁧䑈䕐瀠灩獥⠠卉㨠㐠㠹⤴漠慬摮瀠牯楴湯椠据畬楤杮挠湯敶楹杮眠瑩楨湩瑩慩敬摡愠摮愠楬湧湩⁧桴⁥楰数ⱳ攠敬瑣潲昭獵潩敷摬湩⁧獵湩⁧畡潴慭楴⁣牯猠浥⵩畡潴慭楴⁣汥捥牴景獵潩慭档湩獥‬整瑳湩⁧桴⁥楰数楬敮琠畨⁳慦牢捩瑡摥琠畳瑩琠敨栠摹慲汵捩眠牯楫杮瀠敲獳牵⁥湡⁤晡整⁲整瑳湩Ⱨ愠楬湧湩⁧桴⁥楰数楬敮‬潬敷楲杮琠敨瀠灩⁥湩瀠獯瑩潩湩潴琠敨琠敲据敨⁳污敲摡⁹慭敤‬整瑳湩⁧桴⁥楬敮琠畳瑩扡敬瀠敲獳牵⁥楷桴瀠瑯扡敬眠瑡牥戠晥牯⁥慢正映汩楬杮愠摮氠癥汥楬杮琠敨琠敲据敨⁳湩汣摵湩⁧污慬潢牵挠慨杲ⱥ栠物⁥潦⁲灡汰慩据獥攠捴Ⱞ挠浯汰瑥⁥畢⁴硥汣摵湩⁧潣瑳漠⁦楰数愠摮映瑩楴杮㩳㤠洰潎業慮畏整⁲楄浡瑥牥瀠灩獥씮〱⸰㈱㤮䌺湯敶楹杮愠摮映硩湩⁧⹇⹉瀠灩獥挠浯汰瑥⁥楷桴䜠䤮‮楦瑴湩獧椠据畬楤杮琠敲据楨杮愠摮爠晥汩楬杮攠捴Ⱞ戠瑵攠捸畬楤杮挠獯⁴景瀠灩獥愠摮映瑩楴杮⁳潦⁲硅整湲污眠牯㩫ㄠ〰浭搠慩敭整⁲潮業慮潢敲쐮〱⸰㈱㠮䌺湯敶楹杮愠摮映硩湩⁧⹇⹉瀠灩獥挠浯汰瑥⁥楷桴䜠䤮‮楦瑴湩獧椠据畬楤杮琠敲据楨杮愠摮爠晥汩楬杮攠捴Ⱞ戠瑵攠捸畬楤杮挠獯⁴景瀠灩獥愠摮映瑩楴杮⁳潦⁲硅整湲污眠牯㩫㠠洰楤浡瑥牥渠浯湩污戠牯⹥Ä㄀〰ㄮ⸲㨷潃癮祥湩⁧湡⁤楦楸杮䜠䤮‮楰数⁳潣灭敬整眠瑩⁨⹇⹉映瑩楴杮⁳湩汣摵湩⁧牴湥档湩⁧湡⁤敲楦汬湩⁧瑥⹣‬畢⁴硥汣摵湩⁧潣瑳漠⁦楰数⁳湡⁤楦瑴湩獧映牯䔠瑸牥慮潷歲›㔶浭搠慩敭整⁲潮業慮潢敲쐮〱⸰㈱㘮䌺湯敶楹杮愠摮映硩湩⁧⹇⹉瀠灩獥挠浯汰瑥⁥楷桴䜠䤮‮楦瑴湩獧椠据畬楤杮琠敲据楨杮愠摮爠晥汩楬杮攠捴Ⱞ戠瑵攠捸畬楤杮挠獯⁴景瀠灩獥愠摮映瑩楴杮⁳潦⁲硅整湲污眠牯㩫㔠洰楤浡瑥牥渠浯湩污戠牯⹥Ä㄀〰ㄮ⸲㨵潃癮祥湩⁧湡⁤楦楸杮䜠䤮‮楰数⁳潣灭敬整眠瑩⁨⹇⹉映瑩楴杮⁳湩汣摵湩⁧牴湥档湩⁧湡⁤敲楦汬湩⁧瑥⹣‬畢⁴硥汣摵湩⁧潣瑳漠⁦楰数⁳湡⁤楦瑴湩獧映牯䔠瑸牥慮潷歲›〴浭搠慩敭整⁲潮業慮潢敲쐮〱⸰㈱㌮䌺湯敶楹杮愠摮映硩湩⁧

.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 25mm diameter nominal bore.h
100.37.10.2:Fabricating M.S. flanges of diameter 350mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.g
100.37.8.2:Fabricating M.S. flanges of diameter 250mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.g
100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.Û100.37.10.3:Cutting 350mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.ý100.37.10.4:Welding 350mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.Ê100.37.10.5:Grinding cut and weld edges of 350mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.Ú100.37.8.3:Cutting 250mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.ü100.37.8.4:Welding 250mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.É100.37.8.5:Grinding cut and weld edges of 250mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.Ú100.37.6.3:Cutting 150mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.ü100.37.6.4:Welding 150mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.É100.37.6.5:Grinding cut and weld edges of 150mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.T
13.48.3:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacturesqm7OD185169/2024-2025:Labour for cutting 350 mm DI K9 pipe7OD172937/2024-2025:Labour for cutting 250 mm DI K9 pipe=OD186007/2024-2025:Labour for cutting150 mm diameter DI. pipe¶18.73.6:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :350 mm dia Ductile Iron Double Flanged¶18.73.4:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :250 mm dia Ductile Iron Double Flanged¶18.73.2:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :150 mm dia Ductile Iron Double Flanged18.30.8:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:350 mm diameter pipe18.30.6:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:250 mm diameter pipe18.30.4:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:150 mm diameter pipeµ18.70.6:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:350 mm dia pipesjointµ18.70.4:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:250 mm dia pipesµ18.70.2:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:150 mm dia pipesë100.31.1.8:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 350mm diameter, Class I.ë100.31.1.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class I.ë100.31.1.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class I.ë100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I.ê100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.ú100.32.4:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 80mm Double Acting Air Valve.ú100.32.3:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 50mm Double Acting Air Valve.ú100.32.2:Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 40mm Single Acting Air Valve.ú100.32.1:Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 25mm Single Acting Air Valve.™100.35.6:Testing 350mm DI/CI pipeline with potable water to the required test pressure. 350 mm dia Observed Data derived from item no.1024 of PHED DATAš100.35.4:Testing 250mm DI/CI pipeline with potable water to the required test pressure . 250 mm dia Observed Data derived from item no.1022 of PHED DATA™100.35.2: Testing 150mm DI/CI pipeline with potable water to the required test pressure 150 mm dia Observed Data derived from item no.1018 of PHED DATAN
OD13986/2025-2026:Conveyance of balance pipes in Erumeli WTP to Section store Manganam . These rates are inclusive of Contractor's profit and over heads but exclusive of GST By Mechanical Transport using mobile

crane, tipper, and etc including loading and unloading and stacking charges as per direction of departmental officers.FDistribution Network - Construction of Valve Chamber and Anchor Blocks5
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soilî4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)Î5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or morekilogramï4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.™OD172938/2024-2025:Supplying and fixing C.I man hole cover with frame for manholes:560 mm diameter ( heavy duty) the weight to be not less than 208 kg.Providing FHTC2100.60.1.1.2:Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing PVC / HDPE mains up to 110 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.9100.60.1.4.2: Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing AC / GI mains up to 125 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, GI / MS / SS Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.ý
OD172939/2024-2025:Changing existing service connection from the discarded pipe to the newly laid pipe of dia 160/140/110/90mm PVC /corresponding dia GI pipe by cutting the service pipe line and clossing the other end of the same so as to arrest the leak from the existing saddle and fitting new saddle inthe newly laid pipe , cost of saddle,20mm dia cpvc pipe ,20mm Cpvc fittings ,including cost and conveyance of all materials ,labour for fitting and hire for tools etc...with specifying consumer numbers.V100.60.3.1.1:Providing additional length of house connection pipe using 20mm Indian Standard Class 6 uPVC pipe and specials and testing the joints etc., by trenching and refilling in all kinds of soil with trench of average cross section 0.3m x 0.75m for laying of connection pipe and service pipe, lighting, watching, providing caution boards, traffic control etc., including cost of materials, hire for tools, cost of consumables and labour charges etc. complete, but excluding the cost of cutting of concrete / tarred / bituminous roads etc., and as per the directions of the department officers1
100.60.10.4.1:Providing 20mm (1/2 inch) PVC Air Valve in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire for tools and labour charges etc. complete and as per the directions of the department officers.;
100.60.12.3.2:Providing 15mm PVC Tap in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of consumables, hire charges for tools and labour charges etc. complete, but excluding cost of materials and as per the direction of departmental officers.Providing Booster pump set¯OD172940/2024-2025:Supply, Installation of 5 HP variable head (70m - 135m) & discharge ( 10.5lps - 12.5 lps) ( booster pump while operating in variable speed with VFD depending on demand with suitable sensor,3 phase,50 Hz (Range of Head to be verified and designed by the contractor as per site conditions ) with Bronze /SS impeller .The rate including, cost of pump, cost of motor, cost of panel board, cost of starter with VFD , Aluminum cable from panel board to starter and starter to Motor, cost of Capacitor, suction and delivery piping with suitable strainer in suction, all protections for VFD , provision for remote operation etc complete. Non return and sluice valve, pipe connection works for suction side and delivery side , suitable Earthing as per IE rule, Erection charges including foundation , base plate, cost of cement sand and metal, trail run and commissioning etc. complete as per the direction of Engineer in charge.|OD172943/2024-2025:Protection cover KIOSK for Booster pump, for placing the energy meter starter and panel board accessories~OD172944/2024-2025:OYEC amount for taking connection to the Booster pump house including CD, Inspcetion charges etc. complete.OOD172942/2024-2025:Engaging fitter for valve fixing , interconnection works etcDayOD172941/2024-2025:Engaging labour for traffic control , trace outing of pipe , valve controlling and other miscellaneous worksRoad Restorationo
3.6:Excavation in Marshy Soil Excavation for roadway in marshy soil with hydraulic excavator 0.9 cum bucket capacity including cutting and loading in tippers and disposal with a lift upto 1.5 m and lead upto 1000 m, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.6.³
4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I MaterialO4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to a

chieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead(
5.1.1a:Prime Coat :- Low porosity <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502a
5.12.A.3.2a:Seal Coat - Manual Means - Type C - Bitumen S-65 <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means :- Case - III : Type C <br> (II) Bitumen (S-65)
5.2.3a:Tack Coat <br>Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.Í5.9.1.2a:20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 <br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. <br> Case - I By Manual Means <br> (II) Bitumen (S-65)o
75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)