REPAIR/MAINT OF FIRE ALARM PANELS, PUMPS, FIREFIGHTING INSTALLATION SU SITE 1A AND 1B, DOMESTIC AND TECH AF STN UNDER GE(AF) JODHPUR

Amount

Supply and fixing in replacement of 12 Volt 7AH capacity maintenance free Battery suitable for Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 12 Volt 42AH capacity maintenance free Battery suitable for Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of power supply transformer/SMPS 24 V suitable conventional panel for Autocut Battery Charger complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of power supply transformer/SMPS 24 V suitable addresseble fire alarm panel for Autocut Battery Charger complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Main Control Card (Mother Card) suitable for addresseble fire alarm panel Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Zone Card with complete IC suitable for Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of conventional type Photo Electric Smoke and heat Detector suitable for Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of multisenser Heat Detector & smoke detector addressable type suitable for Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Response Indicator (RI) suitable for Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair Fire Alarm Sounders / Sirens Electronic type horizontal single stage continuous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB 500 mtrs range complete all as specified and directed by Engineer-in-Charge.

M & L Addressable manual call point resettable type all as specified and directed by Engineer-in-Charge.

M & L Addressable electronic sounder cum strobe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of Complete FIRE ALARM PANEL non addresseble type 4 zone suitable for Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge. Make Agni

Supply and fixing in replacement of Complete FIRE ALARM PANEL non addresseble type 8 zone suitable for Automatic Fire Detection & Alarm System complete all as specified and directed by Engr-in-Charge. Make Agni

M & L in replacement of rewiring of faulty area of fire alarm system zone wise with steel conduit and connected accessories including FRLS 1.5 sqmm wire 2 core used for rewiring complete all as specified and directed by Engr-in-Charge.

Material & labour for rewinding of 15 HP motor by opening the motor, taking out burnt out winding and rewinding of motor with super enamelled copper conductor of same gauge and size as per existing, varnishing, heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and tested and make it functional complete all as specified and to the entire satisfaction of the Engineer in Charge.

Material & labour for rewinding of 10 HP to 12.5 HP motor of jocky pump or mud pump by opening the motor, taking out burnt out winding and rewinding of motor with super enamelled copper conductor of same gauge and size as per existing, varnishing, heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and tested and make it functional complete all as specified and to the entire satisfaction of the Engineer in Charge.

Material & labour for rewinding of 5 HP motor by opening the motor, taking out burnt out winding and rewinding of motor with super enamelled copper conductor of same gauge and size as per existing, varnishing, heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and tested and make it functional complete all as specified and to the entire satisfaction of the Engineer in Charge.

Material & labour for rewinding of 1 HP to 3 HP motor by opening the motor, taking out burnt out winding and rewinding of motor with super enamelled copper conductor of same gauge and size as per existing, varnishing, heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and tested and make it functional complete all as specified and to the entire satisfaction of the Engineer in Charge.

M&L for General servicing of 100 HP centrifugal pump set and electric motor (only general servicing) , replacing bearing-02 Nos, replacement of gland bush, unserviceable nut bolts and washers, re-assembling with motor and testing complete all as specified and directed by Engr-in-Charge.

M&L for General servicing of 75 HP to 100 HP diesal engine used in fire fighting including engine oil change, diesal and oil fielter change,radiator cleaning,coolant chage ,air filter replacement, cleaning of diesal tank, general servicing of DG set self and testing complete all as specified and directed by Engr-in-Charge.

M&L for General servicing of 75 HP centrifugal pump set with electric motor (only general servicing), replacing bearing-02 Nos, replacement of gland bush, unserviceable nut bolts and washers re-assembling with motor and testing complete all as specified and directed by Engr-in-Charge.

M&L for General servicing of 7.5 to 10 HP centrifugal pump set replacement of worn out impellers set with bronze impellers, replacing bearing, replacement of worn out bearing housing, replacement of gland bush, unserviceable nut bolts and washers re-assembling with motor and testing complete all as specified and directed by Engr-in-Charge.

M&L for General servicing of 5 HP centrifugal pump set , replacing bearing replacement of worn out bearing housing, replacement of gland bush , unserviceable nut bolts and washers re-assembling with motor and testing complete all as specified and directed by Engr-in-Charge.

M&L for replacement of CI reflux valve of size 150mm dia bore with bypass arrangement complete all as specified and directed by Engr-in-Charge.

M&L for replacement of Pressure switch Universal type complete all as specified and directed by Engr-in-Charge.

M&L for replacement of 25 mm dia Auto Air Purge valve and Drain valve for water piping complete all as specified and directed.

M&L for replacement of rubber/tyre coupling of pumping set 100 HP complete all as specified and directed by Engr-in-Charge.

M&L for replacement of rubber/tyre coupling of pumping set -75 HP complete all as specified and directed by Engr-in-Charge.

M&L for replacement of rubber/tyre coupling of pumping set - 5/7.5 HP complete all as specified and directed by Engr-in-Charge.

M&L for replacement of water pressure gauge 0-7 kg / cm2 any type Make Febig or equivant suitable complete all as specified and directed

M&L for replacement of Indicating Light, 240V AC, LED Type Red, Yellow, Blue complete all as specified and directed

M&L for replacement of ON/OFF Push Button complete all as specified and directed

M&L for replacement of Timer GIC star/delta complete all as specified and directed

M& L in replacment of star delta starter complete with all accessories for 5 HP capacity complete all as specified and directed by Engr-in-Charge.

M& L in replacment of star delta starter compete with all accessories for 7.5 HP to 10 HP capacity complete all as specified and directed by Engr-in-Charge.

M& L in replacment of auto star delta starter complete with all accessories for 15 HP capacity complete all as specified and directed.

M& L in replacment of auto star delta starter complete with all accessories for 60 HP capacity complete all as specified and directed.

M& L in replacment of DOL starter, 3 phase, complete with all accessories for upto 7.5 HP pump set capacity complete all as specified and directed.

M& L in replacment of PVC copper cable of size 10 sqmm, 3 core in flexible PVC pipe complete all as specified and directed.

M& L in replacment of PVC copper cable of size 6 sqmm, 3 core in flexible PVC pipe complete all as specified and directed.

M& L in replacment of 80 mm cast iron foot valve screwed/ flanged complete all as specified and directed.

M& L in replacment of 50 mm cast iron foot valve screwed/ flanged complete all as specified and directed.

M&L and General servicing and calliberation of automation panel works on pressure differential system for following electric driven disel driven pump set fire Fighting with complete testing of power supply cable including lug connection, contactor trip circuit, measuring meter calliberation, No NC point cleaning, complete control wiring repair, relay and trip circuit, maint and all connected accessories regarding serviceability of fire fighting system complete all as specified and directed including testing of system in presence of Engr in charge

Supply and fix in replacement butterfly valve of 50MM size complete all as specified and directed.

Supply, laying, testing and commissioning in repair mild steel ERW Pipe (IS;1239 Part-I) of size 200mm dia heavy grade including cutting, threading, welding etc bends, elbow, reducers, clamps etc in trench and making good the same complete all as specified and directed.

Supply, laying, testing and commissioning in repair mild steel ERW Pipe (IS;1239 Part-I) of size 100mm dia heavy grade including cutting, threading, welding etc bends, elbow, reducers, clamps etc in trench and making good the same complete all as specified and directed.

Supply and fixing in repair Pressure gauge 4" dial 0-14 kgs rating complete all as specified and directed by Engneer-in-Charge.

Supply and fixing in repair Sprinkler glass bulb type (Standard response) as Per IS:15105/TAC guidelines 79 degree temperature rating complete all as specified and directed by Engneer-in-Charge.

Supply and fixing in repair Sluice Valve Class PN 1.6 of size 150 mm bore complete all as specified and directed.

Supply and fixing in repair Sluice Valve Class PN 1.6 of size 100 mm bore complete all as specified and directed.

Supply and fix in repair Sluice Valve Class PN 1.6 of size 80 mm bore complete all as specified and directed.

Supply and fixing in repair Gate valve of size 50 mm bore complete all as specified and directed.

Supply and fixing in repair Gate valve of size 25 mm bore complete all as specified and directed.

Supply, laying in repairs Tubes, 'medium grade' of size 15 mm bore galvanised, with all fitting, laid in trenches complete all as specified and directed.

Supply, laying in repairs Tubes, 'medium grade' of size 20 mm bore galvanised, with all fitting, laid in trenches complete all as specified and directed.

Supply, laying in repairs Tubes, 'medium grade' of size 25 mm bore galvanised, with all fitting, laid in trenches complete all as specified and directed.

Supply, laying in repairs Tubes, 'medium grade' of size 40 mm bore galvanised, with all fitting, laid in trenches complete all as specified and directed.

Supply, laying in repairs Tubes, 'medium grade' of size 50 mm bore galvanised, with all fitting, laid in trenches complete all as specified and directed.

Supply, laying, testing in repair PVC insulated and FR PVC round sheathed copper conductor (flexible) industrial cable, 1100 Volts conforming to IS 694 , cross-sectional area 10 sqmm 3 core complete all as specified and directed.

Supply and fixing in repair MCCBs 415V, 16KA, 4 Pole, 40 A complete all as specified and directed.

Supply and fixing in repair MCCBs 415V, 16KA, 4 Pole, 63 A complete all as specified and directed.

Supply and fixing in repair MCCBs 415V, 6KA, 4 Pole, 100 A complete all as specified and directed.

Supply and fixing in repair MCCBs 415V, 16KA, 4 Pole, 125 A complete all as specified and directed.

Supply and Laying of XLPE insulated, armoured heavy duty electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 Core as specified and directed.

Excavating in trenches, in soft/loose soil n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-Charge .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement fire alarm repeater panel suitable for automatic complete all as specified and directed by Engneer-in-Charge.

Supply, laying, testing and commissioning of FRLS,1.5 Sqmm 2 core, armoured copper cable with ISI Marked complete all as specified and directed by Engneer-in-Charge.

Anil Builders

Prime Technology