Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-AOC | ₹4.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.6 LRejected-AOC | ₹4.6 L | L2 | Rejected-AOC L2 |
| 3 | L3₹4.7 LRejected-AOC | ₹4.7 L | L3 | Rejected-AOC L3 |
| 4 | L4₹4.9 LRejected-AOC KERALA KERALA | IDUKKI | KERALA | 685501 | ₹4.9 L | L4 | Rejected-AOC L4 |
| 5 | L5₹5.0 LRejected-AOC | ₹5.0 L | L5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | M/S SAJEEVAN P A L4 | RAHUL CR L6 | ALI MOHAMMED E I L5 | MEGA COMFORT L3 | SHAJI P V L7 | THABSEERRAHMAN CN L2 | A O ASHRAF L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Subcentre maintanance | ||||||||||
| 1.00 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | 57.75 | sqm | 210.84 ₹12,176.01 | 200 ₹11,550 | 211.71 ₹12,226.25 | 201.94 ₹11,662.04 | 228 ₹13,167 | 197.6 ₹11,411.4 | 189.87 ₹10,964.99 |
| 1.00 | 15.14.1:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above | 0.88 | cum | 4,474.22 ₹3,923.89 | 4,607.85 ₹4,041.08 | 4,492.66 ₹3,940.06 | 4,285.31 ₹3,758.22 | 4,838.25 ₹4,243.15 | 4,193.15 ₹3,677.39 | 4,029.11 ₹3,533.53 |
| 1.00 | OD445343/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35mm (+0.05%), total coated thickness with
zinc coating 120gms per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer
on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective
guard film of 25 microns minimum to avoid scratches during transportation and should be
supplied in single length upto 12m or as desired by Engineer-in-charge. The sheet shall be
fixed using self drilling / self tapping screws of size (5.50x55mm( with EPDM seal complete
upto any ptich in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters
and trusses and including cutting to size and shape wherever required. | 69.44 | sqm | 603.09 ₹41,878.57 | 600 ₹41,664 | 605.57 ₹42,050.78 | 577.62 ₹40,109.93 | 652.16 ₹45,285.99 | 565.2 ₹39,247.49 | 543.09 ₹37,712.17 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 312.48 | kg | 188.64 ₹58,946.23 | 180 ₹56,246.4 | 189.41 ₹59,186.84 | 180.67 ₹56,455.76 | 203.98 ₹63,739.67 | 176.79 ₹55,243.34 | 169.87 ₹53,080.98 |
| 1.00 | OD447431/2025-2026:Ridge caping with pre painted galvanised steel sheets 0.5 mm thick 60 cm wide including all
cost and materials, conveyance, labour charges etc. complete. | 10 | metre | 705.03 ₹7,050.3 | 726.09 ₹7,260.9 | 707.94 ₹7,079.4 | 675.26 ₹6,752.6 | 762.39 ₹7,623.9 | 660.74 ₹6,607.4 | 634.89 ₹6,348.9 |
| 1.01 | OD445342/2025-2026:Providing and fixing on Eave face UPVC Half cut Rain water gutter pipes (150mm 4kg/cm2) with all necessary fittings with clamps at 1 M intervel (12.41.2 modified) | 20 | metre | 494.01 ₹9,880.2 | 500 ₹10,000 | 496.04 ₹9,920.8 | 473.15 ₹9,463 | 534.2 ₹10,684 | 462.97 ₹9,259.4 | 444.86 ₹8,897.2 |
| 1.01 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 16.2 | sqm | 562.93 ₹9,119.47 | 500 ₹8,100 | 565.24 ₹9,156.89 | 539.15 ₹8,734.23 | 608.72 ₹9,861.26 | 527.55 ₹8,546.31 | 506.92 ₹8,212.1 |
| 1.01 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.08 | cum | 1,09,780.7 ₹9,002.02 | 1,13,059.42 ₹9,270.87 | 1,10,232.93 ₹9,039.1 | 1,05,145.26 ₹8,621.91 | 1,18,712.39 ₹9,734.42 | 1,02,884.07 ₹8,436.49 | 98,859.16 ₹8,106.45 |
| 1.01 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 5.04 | sqm | 3,136.5 ₹15,807.96 | 3,230.18 ₹16,280.11 | 3,149.43 ₹15,873.13 | 3,004.07 ₹15,140.51 | 3,391.69 ₹17,094.12 | 2,939.46 ₹14,814.88 | 2,824.47 ₹14,235.33 |
Tender Value
₹5.1 L
EMD Value
₹12,709
Closing Date
9 Mar 2026, 5:00 pmClosed
The Assistant Enginee
The Assistant Engineer, LID AND EW Section , Eriyad Grama Panchayat
2025-26 ERIYAD GP AI CENTRE MAINTENANCE PRO.NO .207
2026_LSGD_841977_2
07/2025-26/AE/LID AND EW/ERD
Open Tender
Civil Works - Buildings
120 days
Eriyad Grama Panchayat
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,125
Yes
₹12,709
Yes
29 Jun 2026
28 Feb 2026
11 Mar 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Subcentre maintanance | |||||
| 1.001 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | - | sqm | - | - |
| 1.002 | 15.14.1:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above | - | cum | - | - |
| 1.003 | OD445343/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35mm (+0.05%), total coated thickness with
zinc coating 120gms per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer
on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective
guard film of 25 microns minimum to avoid scratches during transportation and should be
supplied in single length upto 12m or as desired by Engineer-in-charge. The sheet shall be
fixed using self drilling / self tapping screws of size (5.50x55mm( with EPDM seal complete
upto any ptich in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters
and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.004 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - |
| 1.005 | OD447431/2025-2026:Ridge caping with pre painted galvanised steel sheets 0.5 mm thick 60 cm wide including all
cost and materials, conveyance, labour charges etc. complete. | - | metre | - | - |
| 1.006 | OD445342/2025-2026:Providing and fixing on Eave face UPVC Half cut Rain water gutter pipes (150mm 4kg/cm2) with all necessary fittings with clamps at 1 M intervel (12.41.2 modified) | - | metre | - | - |
| 1.007 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 1 | sqm | - | - |
| 1.008 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 1 | cum | - | - |
| 1.009 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | - | sqm | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1420290.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tendernotice_2.pdf
PDF • 0.29 MB
Tendernotice_3.pdf
PDF • 0.24 MB
Tendernotice_4.pdf
PDF • 0.21 MB
Tendernotice_5.pdf
PDF • 0.15 MB
BOQ_1420290.xls
BOQ • 0.34 MB
nit207.pdf
Tender Documents • 0.03 MB
sbd207.pdf
Other Document • 1.71 MB
Download all tender documents and submit your bid