Construction of Purana Kalakshepa Mandapam Building in the premises of Sri Mulasthaneswara Swamy Temple, Renangivaram(V), J Panguluru(M), Bapatla District

( CONSTRUCTION OF PURANAKALKSHEPA MANDAPAM BUILDING IN THEPREMISES OF SRI MULASTHANESWARA SWAMY TEMPLE AT RENANGIVARAM(V),J.PANGULURU(M), BAPATLA(Dt). )Earth work excavation for foundation and depositing at site with intial lead of 10m and lift of 2m in mixture of gravel and ordinary gravel including all operational,incidental,labour charges etc.,complete for finished item of work as per SS. For Foundation

Filling with sand in foundations & basement from approved source to site including cost and conveyance of all materials and all labour charges etc., for finished item of work as per SS

PCC (1:4:8) for foundation levelling courses and below flooring beds using 40mm size hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials to site and all labour charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work as per SS

VRCC M20 Nominal mix using 20mm size hard granite m/c graded metal(coarsed aggregate)including cost andconveyance of all materials like cement,fine aggregate(sand),coarse aggregate,water etc., to site with all steel centering,shuttering,machine mixing,laying ,vibrating, lifting,curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work as per SS (Pillar Footing).

For Plinth Beam

For 5'' thick roof slab of M.M

Providing Hysd steel bar(Fe 415 grade as per IS 1786-1979) of different diameter including cost and conveyance of all materials like reinforecement bars,binding wire,cover blocks etc and labour for cutting,bending to required size and shapes placing in position with cover blocks of approved size etc to site of work including all wastages such as overlaps couplings,welded joints,chairs,spacer bars and all incidental,operational chares etc.,complete for finished item of work in all floors

Brick work with C.M(1:5) using 2nd class bricks from approved source including cost and conveyance of all materials like cement,sand,bricks,water etc.,to site including all taxes on all materials and such as labour charges like cement mortar mixing,scaffolding charges,construction of masonary,lift charges,curing etc.,complete for finished item of work.(Basement)

Brick Masonry for partition walls (115 mm thick) in CM (1:5) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)

Ornamental Brick work with C.M(1:5) using 2nd class bricks from approved source having minimum crushing strength of 35kg/sqcm including cost and conveyance of all materials like cement,sand,bricks,water etc.,to site and labour charges like cement mortar mixing,scaffolding charges,construction of masonary,lift charges,curing etc.,complete for finished item of work as per SS (Upapeetam)

Plastering 12 mm thick in CM (1:3) with sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves etc., complete for finished item of work as per SS (For ceiling)

Plastering 12 mm thick in CM (1:5) with sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves etc., complete for finished item of work as per SS

Plastering 20 mm thick in CM (1:5) with sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves etc., complete for finished item of work as per SS

Ornamental Plastering 1" to 1 1/4" thick with base plastering 1/2" to 3/4" in CM (1:3) and top finishing 1/2" thick with C.M(1:2) to bring the required ornamentation,fine rendering with neat cement including cost and conveyance of all materials,labour charges, all operational and incidental charges,curing etc.,complete to the required shape and size as per the approved drawings and as per Silpi Norms for finished item of work.(First floor)

S&F of FullyPanneled Doors External or Internal moulded pannels SS 290 including cost of Medium Class Teak wood , wrought and putup, labour charges for making, necessary fixtures and fittings and fixing in positon etc., complete with size Frame and size planks:

Providing and fixing 35mm thick BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelam colours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of Engineer- in-Charge, manufacture specification and drawing

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size of 63.5x100MM (ISI Make) with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control handdrilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. and fixing with 28-30 MM thick solid Wood Polymer Composite (WPC ) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum (ISI Make). shutter will be fixed to the frame using 3 inch hinges. A minimum of 4 hinges will be required including cost of fixtures like 4Nos. Aluminium Butt hinges (IS:205)- 75 mm , 2Nos. MS-Powder Coated Door Handles (IS:208) 150 mm, 1No. Aluminium Tower Bolt-10 mm Bolt (IS:204) 100 mm and 1No. MS-Powder Coated Aldrops (IS:2681) 200 mm, cost and conveyance of all materials, labour charges for fixing, Transportation etc.

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).

Providing and fixing factory made uPVC white colour fixed glazed windows /Ventilator scomprising of uPVC multi-chambered frame andmullion (whereever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile) ,uPVCe xtruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners100 x 8 mm size for fixing frame to finished wall,plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hard ware's and drainage of wateretc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of Engineer-in Charge inclusive ofcost of Single / double glass panes and silicon sealant.Note:For uPVC frame,sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in

Flooring with Telephone block granite 18-20 mm thick upto 2.43m (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Flooring with Polished Vitrified tiles including cost and conveyance of all materials like marble slabs,cement, sand, water etc., to site and all operational, incidental charges on materials and all labour charges for laying,jointing,polishing,mixing mortar, finishing etc., complete for finished item of work as per SS

Providing skirting to internal walls to 10 cm height/risers of steps with vitrified tiles 1st quality length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Flooring with Non skid Ceramic tiles including cost and conveyance of all materials like tiles,cement, sand, water etc., to site and all operational, incidental charges on materials and all labour charges for marble laying,jointing,polishing,mixing mortar, finishing etc., complete for finished item of work as per SS

Dadoing with glazed Ceramic tiles including cost and conveyance of all materials like tiles,cement, sand, water etc., to site and all operational, incidental charges on materials and all labour charges for marble laying,jointing,polishing,mixing mortar, finishing etc., complete for finished item of work as per SS

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid overroof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903)

Providing Ornamental plastering columns using cement,sand,steel reinforcement,iron mesh,brick bats,flat tiles etc.,including cost & conveyance of all materials,labour charges complete for finished item of work

Painting to new wood work and shutters with lappam finish over primary coat and two coats with Synthetic enamel paint Grade-I VOC(Volatile Organic Compound) content less than 50grams/litre of approved shade including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.