TOKEN NO. GE/K-57/2024-25 - REPAIR AND REPLACEMENT OF CEILING, ROOFING, WALL PANELLING, JOINERY AND MISC E/M WORKS IN VARIOUS UNITS IN KARGIL UNDER GE KARGIL

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

Supply & fixing 9 mm thick Prelaminated particle board, interior grade, prelaminated both sides with one side with decorative choice lamination & other side balancing fixed with nails to timber frame work on wall/ceiling complete all as specified and directed.

Supply & fixing 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work as in wall/ceiling complete, all as specified and directed by Engr-in-Charge

M&L factory made second class soft wood wooden battens kiln dried spruce or pine profiled lumber, not less than 12mm thick, length 3000 mm & width 110-120 mm insert each other with male and female grooves fixed with nails to timber frame work as in wall/ceiling paneling, shelves etc including dismantling old wall/ceiling board any type and applying under coating and finishing coats of wood polishing complete all as specified and directed (Make-Beliy Ruchey or equivalent in approved make).

M&L laminated wooden flooring 8mm thick size 193mm x 1214mm of High density hard wood fibre board (HDF) with highly anti abrasive protective overlay and melamine impregnated decorative film with interlocking system, laid over 2mm thick foam with suitable arrangement including dismantling of existing old one complete all as specified and as directed

Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.

Supply & fixing second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.

Supply & fixing second class softwood moulding as in cornices, picture rails and the like sectional area not exceeding 6 Sqcm fixed with nails complete all as specified and directed.

Supply & fixing second class softwood fillets square, rectangular or triangular in section sectional area not exceeding 3 sqcm , clean sawn, secured with nails or brads bullnosed, splayed, chamfered or rounded on one edge or face as in cover fillets, all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 Sqm m each

Supply & fixing 35mm thick second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

Supply & fixing 35mm thick second class soft wood (KAIL) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.divide dinto squares with plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etall as speicified and diretected by Engr-in-Charge.

M&L preparation of wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Supply & fixing in repair butt hinges medium weight cold rolled mild steel of 100mm long

Supply & fixing in repair aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long.

Supply & fixing in repair aluminum anodised barrel tower bolts of extruded section, 150mm long.

Supply & fixing in repair anodised aluminium handle, cast type anodised section 150mm size.

Supply & fixing in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified.

Supply & fixing in repair towel rail 600mm long of PTMT fixed with and including chromium pated brass screws.

Supply & fixing in repair curtain rails anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified.

Hacking out old broken glass (any thickness) and size from metal frame glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

Supply & fixing 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge.

Supply & fixing 0.50 mm thick pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply & fixing 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply & fixing in repairs 300 mm long brass body ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

Supply & fixing in repair of aluminium( extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch.

All as per Srl item No. 30.00 here in before but for one 3 pin 5 Amps switch socket on same board.

All as per Srl item No 30.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board.

All as per Srl item No. 30.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.

Supply & fixing switch piano flush type 5 Amps, single pole one way.

Supply & fixing switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

Supply & fixing switch socket combination 2 in 1, 5 and 15 Amps flush type.

Supply and fixing Socket Outlet 2 in 1, 6 Amp flush type

Supply & fixing ceiling rose on PVC squre block surface bakelite 65x50mm, two to three terminals.

Supply and fixing LED 1x18/20 Watt, 220 V, AC decorative box type fitting with driver, holder including LED tube ligh having lumen out put 100lm/wattt,CCT:6500K , PF>0.9, and connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm including making arrangement for fixing Complete all as specified and directed.

Supply & fixing in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

Supply & fixing in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing Complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing Complete all as specified and directed..

Supply & fixing in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified.

Supply & fixing in replacement1100 volts grade heavy duty 16 Sqmm 2 core flat cable PVC insulated aluminium standard conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed.

Note : Deduction for amount of Rs. 70,958.50 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S BHAT ENGINEERS (BID ID -3235109)

M/S BALI CONSTRUCTIONS (BID ID -3237128)

J P and Compnay (BID ID -3237675)

KASHMIR FAIR DEAL SERVICES (BID ID -3238434)

M/s Pall Constructions (BID ID -3243645)

M/S TRADE LINK (BID ID -3237541)

M/S MOHD KHAN (BID ID -3235081)

M/S Ghulam Mustafa (BID ID -3243927)