CONSTRUCTION OF 20 BEDDED HOSTEL IN THE JSTDI CAMPUS AT CHAIBASA JHARKHAND

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.

Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B)

Earthwork in exacavation in foundation trenches in ordinary soil(vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M including all lifts, levelling, ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.

Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75-B one brick flat soiling joints filled with local sand including cost of watering taxes,Royalty all complete as per building soecification and direction of E/I

Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).

Providing designation 75A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125mm thick reinforced designation 75 A brick work in C.M. ( 1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 includingthe cost of screening,carriage materials scaffolding, raking out joints to 15mm depth , curing, taxes and royalty( but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:6) in Superstructure and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 112mm thick reinforcement designtion 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty ( but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 34 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size)

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases

Cenering and shuttering include shuttering propping etc. and removal of from for Edge of Slab and Breaks in floor and wall,above 20 cm wide

Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges

Suspended floors,Roofs,Landing,Balconies and access Platform with water proof ply 12 mm thick

Cenering and shuttering include shuttering propping etc. and removal of from for:-Lintel, Beam, Plinth Beam,Girders,Bressumers and cantilevers with water proof ply 12 mm thick

S/F 35mm thick solid core type decorative single leaf flush door and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, sliding door bolts tower bolts, handles or rings hooks and eyes, cleats sand block as per schedule taxes and royalty all complete as per building and direction of E/I.

Supplying, fitting & fixing 35mm thick solid core type decorative double leaf flush shutter in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneeres of standard makew with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing Tor steel reiforcement of 8mm. 10mm, 16 mm& 20mm dia. Bars as per approved design and drawing excludinjg carriage of M.S. bars to work site, cutting, bendig and binding wiith annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.

Providing Tor steel reiforcement of 8mm. 10mm, 16 mm& 20mm dia. Bars as per approved design and drawing excludinjg carriage of M.S. bars to work site, cutting, bendig and binding wiith annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.

S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.)

Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I.

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing and laying 25 mm thick Kotah stone tiles in risers of steps,skirting and pillars of approved size,texture and colour laid over 12 mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including bring to granolithic finish with apprived quality of carborandum stone including cost of curing,taxes and royalty all complete as per building specification and direction of E/I (Single Piece)

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building direction of E/I.

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5 mm cement punning includind curring,carriage of water with all leads and lift as per building specification and direction of E/I.

Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coat of oil bound distemper of approved shade and make over a primer coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Carriage of Materials Brick Lead=1K+7P(8Km)

Fly ash Brick,Lead=15 Km

Sand,Lead=10 Km

Stone Chips,Lead=22 Km

Stone Metal,Lead=22 Km

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike?plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer?in-charge:Fixing with adjustable lugs with split end tail to each jamb

Proving and fixing factory made PVC door frame size 50x47 mm with a wall thickness of 5 mm made out of extruded 5 mm ridge PVC foam sheet,mitred at corners and jointed with 2 nos of 150 mm long brackets of 15 x15 mm M.S square tube,the vertical door frame profiles to be reinforced with 19x19 mm M.S sqatre tube of 19 mm gauge,EPDM rubble gasket weather seal to be provided though out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of E/I

Providing anf fixing factory made panel PVC shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mmx19 mm for styles and 15x15mm for top and bottom rail,M.S. frame shall have a cost of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30 mm thickess,70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall bed in 45 degree on the inner side to form top and bottom rail 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form sides to form lock rail ,top,bottom and lock rail shall be provided both side of the panel,10mm (5mmx2) thick.20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail, panelling of 5mm thick both side PVC shrrt to be fittted in the M.S. frame welded/ sealed to the styles and rails with 7 mm (5mm+2mm) thickx15mm wide PVC sheet beading on inner side,and jointed together with solvent cement adhesive.An additional 15 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction of E/I manufacture"s specification and Drawing.30 mm thick pre laminated PVC door shutters

Labour for laying,fitting and fixing NP-2 R.C.C. spun pipe with collars in lines,level and grade and providing approved jointing materials and joints properly filled to make them leak,proof including providing sigth rail,bonning rod,night guard,Red light and barrier etc. all comlplete as per specification and direction of E/I.150 mm dia. R.C.C pipe

Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing menbrane,black finished reinfoced with glass fiber matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/Sqm by the same membrane manufacture of density at 25 degree celcious 0.87-0.89 Kg/Ltr. and viscocity 70-160 Cps over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: joint strenght in logitudinal and transverse direction at 23 degree Celcios as 350/300 N/5 . Tear strengh in logitudinal and transverse direction as 60/80 N.Softening point of membrane not less than 150 degree celcious.Cold flexibilty shall be upto-2 degree celcious when tested in accordance with ASTM,D-5147.The laying of membrane shall be done through the authorised applicator of the manufacture of membrane.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Providing and fixing stainless steel (Grade 304 ) railing made of Hollow tubes,channels,plates etc. including welding,grinding.buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete.i/c fixing the railing with necessary accessories and stainless steel dash fastener,stailess steel bolts etc. of required size on the top of the floor or the side of eaist slab with suitable arrangement as per approved of E/I ( for payment purpose only weight of stainless steel members shall be cosidered excluding fixing accessories such as nuts,bolts.fasteners etc)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge,clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size.Size of Tile 600 x 600 mm

Providing and laying Vitrified tiles in wall in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge,clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Providing nosing edges moulding to 25 mm thick Kotah stone including machine polishing to edges to give high glooy finish etc. complete as per design approved by E/I

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS: 15622,of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes.110 mm Rain water pipe

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler - 110mm

Bend - 110mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With flot glass panes of 5.0 mm thickness (weight notless than 12.50kg/sqm)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With frosted glass panes of 5.0 mm thickness (weight notless than 12.50kg/sqm)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse:sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Supplying at site Angle Iron post and Strut of required size including bottom to be split and bent at right angle in opposite direction for 10 Cm length and drilling holes upto 10 mm dia. Etc. complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 80 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction ofE/I.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Providing and fixing 75mm # vent pipe with cowl all complete as per specificatin and direction of E/I.

Supplying and fixing C.I. Cover without frame for manhole:-500 mm diametre C.I. Cover (medium duty) the weight of the cover to be not less than 58 Kg.500 mm diametre C.I. Cover (medium duty) the weight of the cover to be not less than 58 Kg

Constructing brick masonary chamber for undergroun C.I. inspection chamber and bebds with bricks in cement mortar 1:4 (1 cement :4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover with frame to be not less than 38 Kg ( weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab with 1:1.5:3 mix (1 cement:1.5 fine sand :3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10(1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement on wall and bed concrete etc. Complete as per standard design.Insidedimension 500x 700 mm and 45 cm deep for pipe line with one or two inlets.With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Providing top of DPC with bitumen of approved quality @ 17 Kg/Sqm. In pregnated with a coat of coarse sand @ 60 cudm/10 Sqm, including cleaning the top surface with brushes and finally.With residual type petrolium bitumen of grade VG-10

Labour for laying, fitting and fixing NP2 R.C.C. spu pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I. 150mm dia RCC spun pipe - Upto 3.0 metre depth of invert below G.L.

Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I. 150mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge

Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge

DT : Basic rates for 125/115mm dia drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of E/I.. (Basic Rates) Drilling upto 30 mtr. Depth below G.L. in Rural Area

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in- Charge.80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.

Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

Providing and fixing concertina coil fencing with punched tapeconcertina coil 600 mm dia 10 metre openable length ( total length90 m), having 50 nos rounds per 6 metre length, upto 3 m height ofwall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apartand with 9 horizontal R.B.T. reinforced barbed wire, stud tied withG.I. staples and G.I. clips to retain horizontal, including necessarybolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing and fixing concertina coil fencing with punched tape concertina coil600 mm dia. 10 Mtr openable length (Total length 90 Mtr) having 50 nos rounds per 6 Mtr length upto 3.0 Mtr height of wall with existing angle iron Y shaped placed 2.4 Mtr or 3.0 Mtr. apart and with 9 horizontal R.B.T reincored barbed wire stud tied with G.I. Staples and G.i. clips to retain horizontal, including necessary bolts or G.I barbed tied to angle iron,all complete as per direction of E/I with reincored barbed tape (RBT)/ Spring core (2.5 mm thick) wire of high tensile strength of 165.0 Kg/Sq.mm with tape (0.5 mm thick) and weight 43.478 grm/Mtr.(Cost of M.S Angle,C.C. blocks shall be paid seperately)

Providing and fixing white vitrous chaina type water closet ( European type W.C. pan) with seat and lid 10 litre low level white vitreous china. flushing cictern and C.P. flush bend with fitting and C.I brackets 40 mm flush bend,overflow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets,cutting and making good the wall and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with100 mm sand cast iron P andS trap, 10 litre low level white P.V.C. flushing cictern including flush pipe,with manually controlled device ( handle lever) comforming to is: 7231,with all fittings and fixtures complete,including cutting and making good the wall and floor wherever required. White vitreous china Orissa pattern W.C . Pan of size 580x440mm with integral type foot rests.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stailess steel plug 40 mm including painting of fittings and brackets,cutting and making good the wall eherever required.Kitchen sink with drain board (510x1040 mm bowl depth 250mm)

Providing and fixing 8 mm dia C.P/S.S. Jet with flexiable tube upto 1 metre long with S.S. Traingular type W.C. of quality and made as approved by E/I.

Providing and fixing white vitrous chaina flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing pipe,sereades with urinal and clamps (all in C.P. brass) with waste fitting in C.P. brass,including painting of fittings and cutting and making good the walls and floor wherever required. Single half urinal with 5 litre P.V.C automatic flushing cictern

Providing and fixing wash basin with C.I. brackets 15mm C.P brass single hole basin mixer of approved quality and make,including painting of fitting and brackets,cutting and making good the walls wherever required. White Vitreous chaina Wash basin size 630x400mm with a 15 mm C.P. brass single hole basin mixer.

Providing and fixing C.P brass angle valve for basin mixer and geyser point of approved quality conforming to IS: 8931----15 mm nominal bore

Supplying,fitting and fixing the following items complete with all materials as per specification and direction of E/I.Mirror of 6 mm thick plate glass bevelled edge mirror including C.P. brass revolving fitting 3 mm ply wood board and C.P. hinges to fix with mirror.

C.P. brass tower rail 20mmx600mm with bracket container

C.P. brass dish container medium quality with screw and hinges etc.C.P brass liquid soap container

Providing and fixing gun metal non-return valve of approved quality (Screwed end)-25 mm nominal bore-(Vertical)

Providing and fixing PVC waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexble pipe.40 mm dia.

Providing and fixing PTMT Swivelling shower 15 mm nominal bore weighingnot less than 40 gm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

Providing and fixing on wall face unplasticised-PVC moulded fitting/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 type A, including jointing with seal ring conforming to IS: 5382,leaving 10 mm gap for thermal expension.Single Tee without door-110x110x110 mm .

110 mm Bend or Elows

Providing and placig on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover ad suitable locking arrangement and making necessary holes for ilet,outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing CPVC ( Chlorinated Polyxinyl Chloride pipes,having thermal stability for hot and cold water supply,including all CPVC plain brass threaded fittings,i/c fixing the pipe with clamps at 1.0 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. 15mm nominal outer dia pipes

25 mm nominal outer dia pipes

32 mm nominal outer dia pipes

Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore,86 mm long,weighing not less than 88 gms

Providing and fixing Geyser of with all complete job as per specification and direction of E/I. (JAGUAR).For Toilet Section -15 Ltr.

Providing and fixing Geyser of with all complete job as per specification and direction of E/I. (JAGUAR). -15 Ltr.

Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.Group A

Supplying and fixing batten/ angle holder including connection etc. as required.

9/10 Watt LED Bulb

S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-5 or IEC:62722 with all necessary accesories as required.80 W LED Flood light

S.I.T.C of following rating surface mounted LED tube lightfitting suitable for 230V 50Hz, single phase supply etc. complete as required.20w/22w LED tube

SITC of 2x20W LED Tube light.

12" (300mm) Exhaust fan

Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of he above fan making good the damage, connection, testing, commisionig etc as required.

S/F Modular type electronic fan regulator-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. :-

Supply, fitting, fixing and testing of 1200mm Sweep, BLDC, 5Star Fan.32 W

S/F light plug point with modular type accessories :-Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc, as required.

S/F light plug point with modular type accessories :-Power plug wiring in PVC coduit (2x4 Sq.mm) Wiring fo light/ power plug 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required.

Supplying and fixing of the following size of along with accessories in surface/ recess PVC including cutting the wall and making good the same in case recessed conduit as required.conduit:-32mm

Supplying and fixing T.P. MCB DB -Supplying and fixing following way,single pole and neutral sheet,MCB distribution board 240 volton surface/recess,complete with tinned copper busbar,neutral busbar,earth bar, din bar, detachable gland plate,interconnection,phoshatized and power painted including earthing etc. as required (But without MCB/ RCCB /Isolator) 2 way,single door

Supplying and fixing 2 pin 5 amp Ceiling rose on the existing junction box/wooden block including connection etc. as required.

Supplying and fixing Piano type switch/socket:--Supplying and fixing following Piano type switch/socket on existing swiotch box.cover including connection etc. as required.5/6 amp,one way switch

15/16 amp,one way switch

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

S/F 20amps SPN MCB industrial Socket:-Supplying and fixing 20 amps 240V, SPN industrial socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB insheet steel enclosure on surace or in recess with chained metal cover for the socket outlet and complete with connections, testing & commissioning etc.

S/F Modular boxes, base & cover plate :-Supplying and fixing following size/ modules G.I. box along with modular base & cover plate for modular switches in recess etc as required.12 module (135mm x 205mm x 60mm)

S/F Modular type blanking plate :-Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit.2 X 1.5 sq. mm + 1 x 1.5 sq.mm Earth Wire Earth Wire

2 X 2.5 sq. mm + 1 x 2.5 sq.mm Earth Wire

Earthing with G.I. earth pipe 4.5mtr. long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required.

P/F 25mm x 5mm copper earth strip in surface/ recess :-Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc., as required.

S/L 25 mm x 5 mm G.I. earth strip in ground :-Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc.

P/F G.I. lightning conductor finial :-Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

G.I. earth plate electrode :-Earthing with G.I. earth plate 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.

P/ F G.I. Lightning conductor tape in horizontal run :-Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (horizontal run).

P/ F G.I. Lightning conductor tape in vertical run :-Providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (vertical run).

Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 150 sq.mm

3.5c x 70 sq.mm

Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.3.5c x 150 sq.mm (50mm)

3.5c x 70 sq.mm (38mm)

Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.6 Way (4+18) Double Door, Horizontal type

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10kA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing & commissioning etc. as required.63A rating, TPN MCB, "C" curve 10 KA breaking capacity.

40A rating, TPN MCB, "C" curve 10 KA breaking capacity.

6/32A rating, SPN MCB, "C" curve 10 KA breaking capacity.

Supplying and fixing following rating four pole, (three phase and neutral) 415 volts, residual circuit breaker (RCCB) having a sensitivity current 30 milli amperes in the existing MCB DB complete with connection, testing & commissioning etc. as required-25 amps.

Main Distibution board for 20 Bedded hostel Building-Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Indoor Type Main Distribution Board fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.The Main Distribution Board shall broadly comprise of the following equipment/components)ncoming Feeders:-ncoming Feeders:-250A, TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No. (AC Mains) 100A, TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 2 Nos. (DG OG + Changeover).Outgoing Feeders:63A TPN MCCB 16kA - 02 Nos.

300A TPN Copper bus bar in metal encolsure with fixing clampsIndication lamps(On- Off Trip Power On -- RYB)-Supplying, Installing, Testing & Commisioning cost of Main Distribution Board for 300 Bedded Hostel building all complete with all necessary items as per direction of E/I. 40A TPN MCB 10kA - 20 Nos. 63A TPN MCB 10kA - 28 Nos.

S/F MCCB in cubical panel board :- Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250A, TPN MCCB, 35kA

100A, TPN MCCB, 16kA

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, "C" curve, miniature circuit breaker suitable for.inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.63A rating, TPN MCCB, 16kA

40A rating, TPN MCB, "C" curve 10 KA breaking capacity.

63A rating, TPN MCB, "C" curve 10 KA breaking capacity.

SIF Busbar chamber :- Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connections, earthing the body etc. as required.300 A, 415V heavy duty three phase with neutral Copper busbar chamber

S/F Panel mounted changeover :-Providing and fixing following capacity 4 pole ONJoad panel mounted changeover switches in existing cubical panel board, making connection,earthing the body etc. as required.Electro-mechnical lock for auto changeover -1 set: 125A, 4P

S/F HRC fuse type TP&N switch disconnector :-Providing and fixing following TP&N discorurectorfuse switch unit in the existing metal board with ISI marked HRC fuses including drilling holes inmetal board, making connections. etc. as required.HRC Fuse- 100 Amps TP&N for control supply

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, "C" curve, miniature circuit breaker suitable for.inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.63A rating, TPN MCCB, 16kA

40A rating, TPN MCB, "C" curve 10 KA breaking capacity.

63A rating, TPN MCB, "C" curve 10 KA breaking capacity.

40A rating, TPN MCB, "C" curve 10 KA breaking capacity.

63A rating, TPN MCB, "C" curve 10 KA breaking capacity.

10 sqmm ISI marked,FRLS PVC insulated,single core copper conductor cable

6.0 sqmm ISI marked,FRLS PVC insulated,single core copper conductor cable

2.5 sqmm ISI marked,FRLS PVC insulated,single core copper conductor cable

1.5 sqmm ISI marked,FRLS PVC insulated,single core copper conductor cable

Supplying and fixing wall floor mounted cubical panel board fabricated with 16 gauge iron sheet suitable for panel mounted witch disconnector including busbar chamber insulator and painting etc as required (but without busbar copper chamber)

SIF Busbar chamber :- Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connections, earthing the body etc. as required.300 A, 415V heavy duty three phase with neutral Copper busbar chamber

S/F Panel mounted changeover :-Providing and fixing following capacity 4 pole ONJoad panel mounted changeover switches in existing cubical panel board, making connection, earthing the body etc. as required.Electro-mechnical lock for auto changeover -1 set: 125A, 4P

S/F HRC fuse type TP&N switch disconnector :-Providing and fixing following TP&N discorurectorfuse switch unit in the existing metal board with ISI marked HRC fuses including drilling holes inmetal board, making connections. etc. as required. HRC Fuse- 100 Amps TP&N for control supply

Electronic timer-on delay/off delay for 0 to 30sec.

Auxiliary cotactor(1NO+1NC) , 32 A , IS/IEC/60947-4-1

LED indicator lamp R/Y/G/B

Digital Volt Mtr. (0-500Volt)- 3 phase class 0.5

Digital Amp Mtr. (0-500Amp)- 3 phase class 0.5

C.T. Coil of C.T. ratio 300/5 IS : 2705 part-3

C.T. Coil of C.T. ratio 800/5 IS : 2705 part-3

50 mm x 5 mm copper tape (2.30 kg/mtr)

20 mm x 3 mm copper tape (0.533 kg/mtr)

10 sq mm ISI Marked, FRLS PVC insulated, single core copper conductor cable.

6.0 sq mm ISI Marked, FRLS PVC insulated, single core copper conductor cable.

2.5 sq mm ISI Marked, FRLS PVC insulated, single core copper conductor cable.

1.5 sq mm ISI Marked, FRLS PVC insulated, single core copper conductor cable.

S/F wall floor mounted cubical panel board, fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector including busbar chamber, insulator and painting etc as required (but without busbar copper chamber)

Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.(a) From 0.00 M to 50.00 M below G.L.

(a) From 51.0 M to125.00 M

(b) From126.0 M to150.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages(2 HP)

FR PVC insulated 3 core 4 sq.mm copper wire

Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I.

a) Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart)

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).for plantation

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).

Supplying sludge duly stacked at site/ store

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm

Supplying and stacking at site dump manure from approved source, including carriage up to 1km (manure measured in stacks will be reduced by 8% for payment)Same as good earth

Fine dressing of the ground

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and/or good earth to be paid seprately

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Supplying and spreading of sand in Lawn area, including watering, mixing and dressing complete.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing & fixing of White River (Stone) Pebbles size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge-for landscaping

Topiary cutting/shapping of plant removing of cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topiary) watering manure etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.Height of Topiary upto 120 cm

Providing and wartering of irrigation water through water tanker of Horticulture features i.e. lawn, tree, shrubs, hedge/edge, ground cover etc. at the site of work. Water tanker having 5000 lit. capacity with one labour for watering i/c cost of water, filling of tanker, wartering at site with all leads and lifts as per direction of officer-in-charge

Providing and fixing tree guard 0.60 metre square, 2.00 metre high fabricated with MS angle iron 30 x 30 x 3 mm, MS iron 25 x 3 mm and steel wire3 mm dia welded and fabricated as per design in two halves bolted together

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)Tree Plants

Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Schefflera high colour having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and Displaying plants Allyssum white in full bloom well developed Fresh & healthy Plant in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. FOR FRENCH GARDEN

Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Alternanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge.

Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.

Providing and Displaying plants Missbranthemum in different colour well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying plants Nasturtium in different colour well developed with fresh & healthy foliage with full bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge..

Providing and Displaying plants Verbina in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Supply and stacking of plant Cassia biflora of height 60-75 cm. with 4-5 branches in poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge..

Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.

Providing and stacking of Pinus long folia (Pinus) of height 90-105 cm. in cement pots of size 35 cm as per direction of the officer-in-charge.

Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.

Dismantling pucca brick or lime work including stacking serviceable materials in counteble stacks within 15 M lead and disposal of unserviceable materials with all lead all complete as per direction of E/I

Dismantling roofing including ridges,hips.valley and gutters etc. and stacking the materials within 50 M lead of Asbrstors cement sheet

Dismantling patent stone flooring including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all lead all complete as per direction of E/I

Dismantling doors,windows and clerestory windows (steel or wood) shutter including chaukhats,architrave,holdfast etc. complete and stacking within 15 M lead of area 3 Sqm and below.

Labour Cess @1%

M/S M P Verma and Construction (BID ID -686245)

SAI ENGINEERING (BID ID -686661)

SOURISH INFRA DEVELOPERS PRIVATE LIMITED (BID ID -686701)

DIPAK KUMAR (BID ID -686695)