Construction Work of Pumping Station Room, At Tirth Nagar Pumping Station, At-Ankleshwar, Dist. Bharuch Under Swarnim Jayanti Mukhyamantri Shaheri Vikas Yojna (Udp-88) Year 2025- 26. (Sixth Call)

NAME OF WORK:- તીર્થનગર પમ્પીંગ સ્ટેશનમ ાં પમ્પીંગ સ્ટેશનની રૂમ બન વવ ન ાં ક મ

PERCENTAGE RATE TENDER

Description Qty. Rate Per Amount

Excavation for foundation up to 1.5 M Depth including

sorting out and stacking of useful materials and disposing of

the excavated stuff up to 50 mt lead. (B) Dense Hard soil

Excavation for foundation for depth from 1.5 M to 3.0 m

including sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter lead. (C)

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm nominal

size) and curing complete excluding cost of formwork in (a)

Foundation and plinth

Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A) 6.70 3780.51 Cumt.

Foundations, footings, Base of columns and Mass

Filling available excavated earth,(Ecluding rock in trenches

plinth, sides of foundation etc.)in layer not exceeding 20 cm,

in depth consolidating each depo sited layer by ramming and

Filling in plinth with sand under floors including watering

ramming, consoildating and dressing etc. complete

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS

(ii) Having cross-sectional area more than 0.08Sq.M and

Providing and laying controlled cement concrete M.200

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C. 3.30 12495.41 Cumt.

work in (B) COLUMNS:(ii) Having cross-sectional area more

than 0.08 Sq.M and upto 0.18 Sq.M

Providing and laying ordinary cement concrete M-20

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforsement for R.C.C 3.70 7921.43 Cumt.

work in (iii) Slabs having more than 10 cm and upto 13 cm.

Providing and laying ordinary cement concrete M-200 for

R.C.C lintel including finishing smooth with,curing etc.

complete including the cost of formwork but excluding the

cost of reinforcement.

Providing and laying ordinary cement concrete M-200 for

R.C.C Chhajjas not exceeding 10cm. thickness upto floor

two level including finishing the exposed surfaces with

cement mortar 1:3 (1-cement, 3 Fine sand) to give a smooth

and even surface centering and formwork and curing

complete excluding cost of reinforcement.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete 1743.20 76.21 Kg.

upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i)Cement mortar 1:3 (1-

20mm thick sand faced cement plaster on walls up to height

10 mtrs. above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1 cement : 3 sand) and 8mm thick

finishing coat of C.M. 1:1 (1 cement : 1 sand) etc. complete

with interior plastering above floor two level for every

additional storey hight (2) Two coat plaster

Providing throating or plaster drip and moulding to R.C.C.

Chhaja & Elevation Wall

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring 26.00 1415.76 Sqmt.

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and

jointed with gray cement slurry including rubbing and

polishing complete. (A) Marble slab 18mm thick Green

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using 28.90 747.28 Sqmt.

white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak wood

frames 12 cm x 7 cm. size including anodized alluminium

fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete. (ii) Fully

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

Kg/mt), horizontal Three track member size 92mm x

31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07

Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm

(of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm 7.20 1583.95 Sqmt.

(of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc

Providing & fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacing

and frame all-round square or round bars with round headed

bolts and nuts or by screws. (A) Plain grill

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

cleaning, oil,grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even 7.20 87.81 Sqmt.

shade including cleanicn the surface of all dirt, dust and

other foreign matter.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on wall surfaces to give an

even shade including throughly brushing the surface free 57.70 78.90 Sqmt.

from mortar droppings and other foreign matter and sand

papered smooth.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

Providing and fixing G.I. Rain water spout of 50mm dia. and

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white 10.00 419.15 Pt.

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling

complete. Cat. III

Total Amount Rs…………….

Total Amount Rs…………….

Say Amount Rs…………

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be writen

in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 5,79,570=00 Put to Tender Rs. 5,79,570=00

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Municipal Engineer

"DESIGN POINT" Ankleshwar Nagarpalika

Amreli Ankleshwar

Chief Officer President

Ankleshwar Nagarpalika Ankleshwar Nagarpalika

Ankleshwar Ankleshwar