Supplying of Furniture to the chamber of Honble MOS Department of Planning Statistics at first floor of Joint Administrative Building HC 7 Sector III Bidhannagar Kolkata 700 106 during the year 2018 19

Amount

Supply & placement of Godrej make Halo Very high back Chair as per approved drawing & design / specification of EIC .The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-53cm, H-95.4cm & size of seat shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest shall be made up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with M.S insert. The armrest top shall be made up of ABS & upholstered with foam & leather. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee Tilt system, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 5-position locking with antilock back mechanism which should prevent the backrest from impacting the user when the lock is released, Static seat depth adjustment 5.0 +/- 0.5cm with 5 position locking. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The bellow should be single piece duly blow moulded in black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground - min 128.0 to max 137.0 cms. Seat height - min 49.9cm to max 58.9 cm.Dimensions tolerance / variations shall be within +/- 1 cm. The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products.

Supply & placement of Godrej make Bravo Visitor Chair as per approved drawing & design / specification of EIC . Seat/back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a. back size 47.5 cm. (w) x58.0 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) .high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. tubular frame: the powder coated ( dft 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. er.w. tube.

Supply & Placement of Slimline 4 shelf will be from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified Multi bend construction fastener free. Knock down construction. Slim and sleek body with a handle enhanced by a snap shut mechanism. Two tone finish. Elegant skirting cover to cover legs & also provides an additional space for storage. Leveling screw below the legs provides sturdy stand even on uneven surface. DIMENSION OUTER – 1950 x 900 x 507 mm a) Top, bottom, LH & RH sides, Door and back material thickness = 0.8 / 0.6mm b) Door with 10-lever cam lock plastic handle with plastic base. c) 4 Nos shelf of material thickness = 0.6 mm. NET WEIGHT (W/O CARTON) = 67.59 Kg. GROSS WEIGHT (WITH CARTON) = 72 Kg.a. Locks: 10 lever cam lock. b. PU plastic handle used c. Double d shape shooting bolt (blue zinc electro plated) d. 4 Nos. leveling screws e. Pop rivets f. 2 hanging rods half or 1 hanging rod full. g. Cartons: 5 ply carton box used with bursting strength of 18 kg/cm2 .

Supply & placement of Godrej make Impress Main Desk as per approved drawing & design / specification of EIC .Top Supporting BBF Pedestal dimension : 39 cm(W)x 43.5 cm(D)x 67.4 cm (H). Flush drawer front with no handles provides a neat look Recess provided on sides to facilitate opening of drawers An anti-rebound mechanism to prevent the drawer from coming out after it is pushed in Option of free standing and to supporting pedestal Front fasica available in three different finishes

Supply & placement of Godrej make Aristo Desk as per approved drawing & design / specification of EIC .Work surface Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management Modesty Panel Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Under- structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door Storage Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening. Storage is provided with cam lock for security.The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products

Supply and placement of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001, certified Boradway Sofa 2 seater .The modules are designed in a way to that it can be customized according to size and need as they are modular in design.The thoughtfully designed seating components can be fixed to any side of the body by matching the contours , gives the flexibility in composition.1. Seat & Body: · Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termile proof as per IS:303] & pinewood are cross section [22x25, 22x40, 25x75 & 25x100mm] are without major knots & defects on the surface. 3mm MDF is stapled on the seat front bottom vertical surface to get the surface to stick the foam. Dia. 3.8mm zigzag spring asly. is mounted on the seat structure with spring mounting plastic bracket for support & additional cushioning purpose. Elastic belt of 2" width are used above the spring asly. to give good sagging effect. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid the tearing of seat foam with the surface contact of metal spring. Back vertical surface is stapled with non-woven cloth to get surface to stick the foam. Complete understructure is made by gluing & stapling. · Foam: Seat is made of PU foam with density 28 kg/m3 having an additional top layer of supersoft PU foam with density 18 kg/m3. Recron sheet of 230GSM is used above this foam. Seat front bottom vertical surface & back vertical surface is glued with the PU foam with density 22 kg/m3. Side vertical surface, body front taper vertical & top horizontal surface is glued with PU foam with density 16 kg/m3. · Upholstry: Seat & body upholstry is made in the dual tone colour with fabric / fabric option & fabric / leatherite option. 2. Back Top Cushion: · Understructure: Understructure is made of combination 12±1mm & 6±1mm thk. plywood [for 2 Seater, 3 Seater & Chaise Lounge] & combination 12±1mm, 4±1mm thk. plywood & 3mm MDF [for Small Corner & Big Corner] with gluing & stapling. · Foam: It is made with supersoft PU foam with density 18 kg/m3. · Upholstry: It is upholstred with fabric.3. Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws. Supply ,Fitting & Fixing of Godrej Make Broadway Corner Unit from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,GREENGUARD Certified Manufacturers and as per approved drawing & design / specification .Seat & Body:Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termile proof as per IS:303] & pinewood are cross section [22x25, 22x40, 25x75 & 25x100mm] are without major knots & defects on the surface. 3mm MDF is stapled on the seat front bottom vertical surface to get the surface to stick the foam. Dia. 3.8mm zigzag spring asly. is mounted on the seat structure with spring mounting plastic bracket for support & additional cushioning purpose. Elastic belt of2" width are used above the spring asly. to give good sagging effect. Non woven fabric is stapled on the seatstructure frame above the spring asly. to avoid the tearing of seat foam with the surface contact of metal spring.Back vertical surface is stapled with non-woven cloth to get surface to stick the foam. Complete understructureis made by gluing & stapling. Foam: Seat is made of PU foam with density 28 kg/m3 having an additional top layer of supersoft PU foamwith density 18 kg/m3. Recron sheet of 230GSM is used above this foam. Seat front bottom vertical surface & back vertical surface is glued with the PU foam with density 22 kg/m3. Side vertical surface, body front taper vertical & top horizontal surface is glued with PU foam with density 16 kg/m3.Upholstry: Seat & body upholstry is made in the dual tone colour with fabric / fabric option & fabric / leatherite option.Back Top Cushion:Understructure: Understructure is made of combination 12±1mm & 6±1mm thk. plywood 3 Seater & combination 12±1mm, 4±1mm thk. plywood & 3mm MDF with gluing & stapling. · Foam: It is made with supersoft PU foam with density 18 kg/m3. · Upholstry: It is upholstred with fabric. These back top cushions are fitted with the seat & body structure with the chipboard screws.

Supply & placement of 3 Seater Sofa 1960x920x950 from ISO 9001:2008, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Manufacturers and as per approved drawing & design / specification The Seat made of PU foam with density 32 +-2 kg/Cuy Mtr havinga n additional top layer of PU foam with density 28+-2kg/Cu Mtr.the seat is upholstered with Leather.The back would be made up of same foam density.The understructure is made up with 1.2+-0.1 cm thick hot pressed plywood .Dia 4 mm zigzag spring assembly mounted in understructure for support.The leg is a welded assembly made in SS tube and plate.

Supply & placement of Alice Coffee table from ISO 9001:2008, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Manufacturers and as per approved drawing & design / secification MATERIALS & DIMENSION (+/-1000 2mm)- 1000*650*450 TABLE LEGS METERIALS & SIZE : TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm); L X W X T-1000x650x10mm

Clear Glass - 6'X3'. Machine Polished. Thickness - 12 mm.

Supply and placement of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001 Greenguard certified Godrej Make Ultima Chair 1. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ± 0.1cm. Thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric and moulded polyurethane foam, together with moulded seat and back covers. the back foam is designed with contoured lumbar support for extra comfort. the chair is available in three models. *PCH-9102R MID BACK SIZE 45.5 CM. (W) X 52.5 CM. (H) *PCH-9101R/9102R/9103R SEAT SIZE 51.5 CM. (W) X 46.7 CM. (D) 2. hIGH RESILIENCE (HR) POLYURETHANE FOAM: THE HR polyurethane foam is moulded with density = 45± kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. 3. Seat / Back covers: for pch-9101/9103 the seat cover is injection moulded in black Co-polymer Polypropylene and back cover is vacuum formed black ABS sheets. for pch-9102 the seat & back cover is injection moulded in black co-polymer polypropylene. 4. Armrests : The one-piece armrests are made of black integral skin polyurethane with 50-70 Shore 'A' hardness and reinforced with M.S. insert. The armrests are fitted to the seat with powder coated (DFT 40 - 60 microns) armrest brackets made of 0.5 ± 0.05 cm. thk. HR steet. 5. (A) forward tilt synchro mechanism: The adjustable tilting mechanism is designed with the following features, Forwar tilt. Self-regulating tilt tension + Manual override. 4-position tilt locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock is released. 360 digree- swivel mechanism. (B) Adjustable Back height Adjustment : The backrest is connected to the mechanism with a drop lift mechanism which can be adjusted in the rance of 7.0 ± 0.5 cm. and locked in 7 positions for the better lumbar support. 6. Pneumatic Height Adjustment: The Pneumatic Height adjustment has an adjustment stroke of 12.0 ± 0.3cm. 7. Telescopic Bellow Assembly : The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. 8. Pedestal Assembly : The pedestal is injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 Nos. twin wheel castors. The pedestal is 66.3 ± 0.5 cm. pitch-center dia. (76.3 ± 1.0 cm. with castors). 9. Twin Wheel Castors : The twin wheel castors are injection moulded in black nylon.

Supply & placement of Godrej make Versa Chair as per approved drawing & design / specification of EIC. The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall beprovided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. The powder coated tubular frame shall be cantilever type and made of dia.2.54+/-0.03 cm x 0.2+/-0.016 cm thick MSERW tube.Overall dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal below. Height from ground - 99.5cm. Seat height -48.5cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Supply & placement of Godrej make Impress Main Desk as per approved drawing & design / specification of EIC .The Main table shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H.The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products

Supply & placement of Xreox Table 900 X 900 X 740 from ISO 9001:2008, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Manufacturers Worktop 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading.C – Frames Legs 1.6 mm thick M.S Cframe Supporting the Top

Supplying & installation of side table Mayfair ERU from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design/secification of Engineer-in-charge. Size : 1200mm W x 450mm D x 750mm H, The ERU top is in white cedar, side panels are in black, whle the modesty panel is a combination of black & white cedar.

Supply & placement of Corner table from ISO 9001:2008, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Manufacturers and as per approved drawing & design / secification Dimension (mm) : 600 W X 600 D X 450 Height Wooden Table top : Sheesham 18mm. Leg : 80X80 Top Side; 40X40 Bottom Side Support : 45X25mm & 8 Pcs. Bolt & Nuts

Godrej And Boyce Mfg.Co.Ltd.

WELL DECOR