SPECIAL REPAIR TO BLDG NO T-121 OF AO OFFICE AND CERTAIN REVENUE AND MINOR WORKS AT IMA DEHRADUN

Amount

Dismantling AC corrugated, semicorrugated sheet including ridge in roof covering.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa & A-Z-150 as in roof covering/cladding to wall fixed with self tapping screws all as specified. Make :- Tata(blue scope)/Jindal India Ltd(neo color+)/JSW Steel (color on+)

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa & AZ-150 as in roof covering/cladding to wall fixed with self tapping screws all as specified. Make :- Tata(blue scope)/Jindal India Ltd(neo color+)/JSW Steel (color on+)

Dismantling timber scantling 40 sq cm and over in section in any position.

S&F Structural steel, rolled section or hollw section as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410 W (Gde-E-250)all as specified and directed by Engineer-in-Charge. Make:- Tata steel, Jindal steel, JSW steel, Appollo steel.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow or flat sections) including distance pieces, cleats etc. Make:- Tata steel, Jindal steel, JSW steel, Appollo steel.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work ( FE 290 Gde E -169 ) .

M&L in repair Mild steel, plain 0.80mm thick , black sheet in wall cladding, steel gates and similar work, but in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as spficied and directed.

M&L for Preparation new steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enemelled paint over one coat red oxide primer complete all as specified and directed.

M&L for Preparation old steel surfaces exc. 10 cm width or girth and applying One coat of synthetic enemelled paint including all preparation complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces all as per manufacturers instruction and directed.

S&F in repair vitreous china WHB white, flat back, size 550 x 400mm including chromium plated brass piller cock , brackets, 32mm Brass CP waste coupling, PVC waste pipe. Complete all as spfd and directed

M & L for complete removal of existing treatment on old decorated surfaces (plastered/un-plastered) on walls including cornices on plastered surfaces, complete all as specified and directed.

M&L for Preparation of new or old surface completely cleaned surfaces and applying two coat of distemper oil emulsion (OBD) over a coat of primer over 2 to 3mm thick white cement based acrylic putty complete all as specified and directed.

S&F in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including chromiume plated brass swan neck sink tap,complete all as specified and directed.

M&L for 15 mm thick ready mix internal/external/ceiling cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, incl tacking dowan plaster ,all complete asspecified and directed Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/ unicrete.

S&F in repair 04 mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres all as specified and as directed by Engineer-in charge (size of main tee 38 mmX25 mmX 1.4 mm, cross tee 38 mm X 25 mm X 1.4 mm angle along walls 38 mm X 25 mm X 2.0 mm) and two coats of oil bound emulsion complete all as specified and directed including dismantling boarding & frame work any description fixed in any position with nails.

M & L machine cut Kota stone 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing complete up to desired finish including 20mm thick screed bed in cement mortar 1:6 directed as specified and directed .

M & L in repair machine cut Kota stone 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing complete up to desired finish including 20mm thick screed bed in cement mortar 1:6 directed as specified and directed .

M & L in repair Kota stone slab 18-20mm thick as in riser of steps, skirting, dado and pillar laid over & including 10mm thick cement screed in cement mortar 1:4 and jointed with grey cement & pointed in grout to match shade of the slop including rubbing & mirror polishing complete all as spfd and directed.

S & F for 600 X 450 mm bevelled edge looking mirror of any size 5.5mm thick fixed with plugs with chromium plated brass screw and cup washer complete all as specified

S & F in repair for 600 X 450 mm bevelled edge looking mirror of any size 5.5mm thick fixed with plugs with chromium plated brass screw and cup washer complete all as specified

S&F brass CP soap dish holder , fixed in repair complete all as specified and directed. Make:- Cera, Jaquar, Kohler

S&F in repair 15mm bore long body bib tap Chromium plated with wall flange complete all as specified and directed. Make:- Cera (Ruby series), Jaquar (Opal prime series), Kohler.

S&F in repair CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with flange complete all as specified and directed. Make:- Cera (Ruby series), Jaquar (Opal prime series), Kohler.

S&F in repair PVC waste pipe 32/40 mm size of required length complete all as specified and directed.

S&F Pillar taps, fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as directed. Make:- Cera (Ruby series), Jaquar (Opal prime series), Kohler.

S&F 20 mm dia Ball valve high pressure of PTMT with eppoxy coated alu. Rod and highdensity plastic ball screwed for iron pipe. Make:- Prayag, Shakti, Polytuff.

S & F in repair Rotational moulded polyethlene water storage tank (cylindrical vetical with closed top) hoisted and fixed in position of 1000 Ltr complete all as directed.

M&L in repair for Vitrified Ceramic colour jointless tiles (600x600) 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. Over & incl 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in grout to match the colour of tile complete all as directed.

M&L in repair for vitrified ceramic coloured tiles (600x600) 8-9mm (square/ rect) polished,, area of each tiles not exc 0.36 sqm inverticle surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in grout to match the colour incl 10 mm thick rendering in cement mortar 1:4. complete all as directed.

M&L in repair for glazed ceramic coloured jointless tiles (300x450)x7mm thick as in vertical surfaces including 10 mm thick rendering in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in grout to match the surface of tiles complete all as specified and directed

S&F stainless steel curtain rod, 25 mm dia,decorative including brackets, decorative finials at both ends complete all as spd. Incl. dismantling of existing rod.etc.

M&L 75 in repair mm thick PCC (1;3:6) type C-1 as in plinth protection/ Path finished even and smooth without using extra cement complete all as specified including 10mmx75mm thick grooves made at every 3mtrs at corners duly filled with sealing compound grade 'A'.

M&L 75 mm thick PCC (1;3:6) type C-1 as in plinth protection/ Path finished even and smooth without using extra cement complete all as specified including 10mmx75mm thick grooves made at every 3mtrs at corners duly filled with sealing compound grade 'A'.

Taking down chowkats or frames with shutters (without taking off shutter from frame) area n'exc 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frame) area exceeding 1.5 sqm but n exc 4.00 sqm complete all as specified and directed.

S & F double rebated Steel windows box type with side hung shutters including box type hinges with steel handle, holdfasts and steel peg stay, complete dovetailed or welded & incl 03mm thick glass pane fixed with glazing putty, in glazed shutter and 0.40 mm thick stainless steel fly proofing with 1.40 mm aprature size in fly proofing shutter incl 12mm squre guard bars between glazed & gauged shutter fixed with MS flat iron frame, cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

Excavation in post holes (or similar holes) each n.exc 0.5 Cum getting out returing, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc for post,column, complete all as specified and directed.

S&F in repair GI tubing 15 mm bore, medium grade with all fitting and fixed complete to wall ceiling or laid in floor complete all as specified.

S&F GI tubing 15 mm bore, medium grade with all fitting and fixed complete to wall ceiling or laid in floor complete all as specified.

S&F in repair GI tubing 20 mm bore, medium grade with all fitting and fixed complete to wall ceiling or laid in floor complete all as specified.

S&F GI tubing 20 mm bore, medium grade with all fitting and fixed complete to wall ceiling or laid in floor complete all as specified.

M & L in repair for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.

M&L for Mild steel Round bars 10mm dia and over Fe-410-W (Gde.E-250) quality, cut to length, bent to shape required, welded, including cranking, bending spirally for hooping for columns, hooking ends or securing with clips complete all as specified and directed. Make:- Tata steel, Jindal steel, JSW steel.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including demolation of existing PCC Plate form complete all as specified and directed. Make:- Tata steel, Jindal steel, JSW steel.

Excavation in trenches n. exc 1.5 mtr wide & n. exc 1.5 mtr depth; for foundations, etc. n. exc. 10 sqm on plan and n. exc. 1.5m in depth and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in hard/dense soil, complete all as specified and directed by Engr –in-Charge.

Removing of excavated material (soil) out side IMA premises and depositing complete all as specified and directed.

M&L for Hardcore of gauge exc. 63mm but n. exc. 100mm deposited spread and levelled in layers n. exc. 15cm thick, watered and rolled and rammed to a true surface with broken stone or boulders as in hardstanding complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate), as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over 15 mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles

M&L in repair glazed ceramic coloured tiles (300x450)x7mm thick in vertical surfaces including 10 mm thick rendering in cement mortar 1:3 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles

M&L glazed ceramic coloured tiles (300x450)x7mm thick in vertical surfaces including 10 mm thick rendering in cement mortar 1:3 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles

M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in sub base.

M&L for TMT Bars 10 mm dia & over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Description all as per item No 51 here- in- before, but 5 to 10mm dia as in stirupps complete all as specified and directed by Engineer-in-Charge.

M&L for form work to sides of concrete foundation , footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

Form work to edges of concrete slabs n exc 20 cm thick

M&L for form work to sides of concrete pillar, column posts, strutts complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete M-25 (using 20 mm graded crushed stone aggregate) as Beams, cantilivers, bressummers lintles over 1.5 m span etc complete all as specified

M&L for reinforced cement concrete M-25 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls beams and columns in floors, roofs landings, balconies canopies deck slabs and in shelves and like etc complete all as specified

M&L for reinnforced cement concrete M-25 (using 20 mm graded crushed stone aggregate) as in foundation including rafts, footings, foundation beams plinth beams bases for column etc complete all as specified

M&L for rienforced cement concrete M-25 (using 20 mm graded crushed stone aggregate) as in Column, pillars, piers posts and structs etc complete all as specified

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius in half brick built in cement mortar (1:4).

M&L for 5mm thick rendering on fair faces of concrete surfaces of ceiling in cement mortar (1:3), finished even and smooth without using extra cement complete all as specified and directed by Engineer-in Charge.

M&L for 15mm thick rendering on fair faces of brick masonry or concrete surfaces of wall in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed by Engineer-in Charge.

M&L for 15mm thick rendering on fair faces of brick masonry or concrete surfaces of wall in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed by Engineer-in Charge.

S&F Vitreous, china squatting pan 'orissa' pattern size 580x440mm white, with integral foot rest ( (excluding flushing cistern and flushing pipe) complete all as specified & directed by Engr-in-Charge. Make:- Cera/ Jaquar/ Kohler

S&F vitreous china wash hand basin, white size 550 x 400 mm incl bracket, PVC waste pipe & CP waste coupling all as specified. Make:- Cera/ Jaquar/ Kohler

S&F PVC connection 15 mm size with PTMT nut of length 600 mm.

S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Make:- Cera/ Jaquar/ Kohler

S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including flush pipe of CP brass suitable for IWC/EWC, 10 Lit capacity. Make:- Jaquar/Parryware/ Cera.

S&F Grating doom 125mm dia. with waste hole of CP (minimum weight 40 gms), complete all as specified and directed by Engr-in-Charge.

S&F Stop/ angle valves 15mm dia bore of pipe, chromium plated, fancy type, with long shank and cap complete all as specified & directed by Engr-in-Charge. Make:- Cera (Ruby Series)/ Jaquar (Opal Prime Series)/ Kohler

S&F Towel Rail 600 mm longof PTMT fixedwith and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms)

S&F brass CP Soap dish, any type, fixed to plugs with chromium plated brass screws. Make:- Cera, Jaquar, Kohler

S&F Bib taps 15mm dia bore of pipe, brass chromium plated, fancy type, complete all as specified & directed by Engr-in-Charge. Make:- Cera (Ruby series), Kohler, Jaquar (Opal prime series)

S&F PVC (SWR) floor/gully trap 100/110 mm, setting and jointing with solvent cement complete all as specified.

S&F PVC (SWR) pipes ,75 mm ,single socketed in any length with rubber ring joints fixed in walls complete all as specified and directed.

M&L PVC (SWR) pipes 100mm single socketed, in any length with rubber ring joints, laid in trenches or in floors.specified and directed

S&F 15 mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed specified and directed. Make:- Cera (Ruby series), Kohler, Jaquar (Opal prime series)

S&F PVC (SWR) bends 75mm any radius with access door all as specified and directed.

S&F PVC (SWR) bends 110mm any radius with access door all specified and directed.

Preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of cement based paint over primer, complete all as specified and directed.

M&L for prepration of new or previously untreated concrete/plastered surfaces of any description over 10 cm width or girth and applying three coats of white wash complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS Square tube.

S&F stainless steel butt hinges 100mm.

S&F stainless steel barrel tower bolt 200 mm long with bright bolt and fixed complete all as specified

S&F stainless steel 150 mm long handle complete all as specified and directed

S&F PVC (SWR) junction single (single T) equal or unequal of 110 mm bore

S&F PVC waste pipe 32 mm dia with coupling suitable for urinal and wash hand basin down pipes of required length complete all as specified

S&F PVC (SWR) bend any radius of 110 mm bore

S&F PVC (SWR) bend any radius of 75 mm bore

M&L for providing precast cement concreete louvers and jallies 35 mm thick 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) set in CM 1:4 complete all as specified

S&F 500 Ltr rotational moulded polyethylane water storage tank (cylinderial vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F 20 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe

S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

Conctruction of brick soak well 2.40 m dia and 4.50 m deep . Excavation in soft / loose soil for foundation in PCC 1:3:6 USING 40MM GRADED STONE AGGREGATE , HONEYCOMB BRICK WORK IN CEMENT MORTAR 1;4 RCC 1:2:4 TYPE B-1 as in sub base including necessary earth work complete in repair and all as specified and directed and shown on drg No- TD/309 Sheet 1/4 to 4/4

M&L for DWC(Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on & including 100mm thick PCC 1:4:8 type D-2 concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar (1:3) over concrete surface finished even & smooth with out extra cement with water proofing compound @ 3 % by weight of cement or as per manufacturer instructions while the concrete is green complete all as specified and directed.

Demolition of brick work/ stone masonay built in cement mortar including all quoins jamb pillars etc.

Surface excavation n'exc 30 cm deep and average 15 cm deep and getting out in any type of soil.

M&L for 100 mm thick PCC 1:4: 8 type D-2 (using 40 mm graded crushed stone aggregate) as in subbase.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, Crystal Tiles.

M&L for Providing, cement concrete (1;2:4) type B-1 20mm gradrd in roof kerbs or mud stops, coping , rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S & F MS angle/TEE/Hollow/tubular section as in main and cross beams, hips, and jack rafter, purlins , doors ets where connected to common rafters and etc. all as directed by Engineer-In-Charge conforming to Fe-290 Gde E-165

S&F for Welded steel wire fabric supplied and fixed complete to wood or steel members

M&L for Forming Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound with sealing compound grade A .

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ Thickness of concrete slab in 150 mm.

Demolition Cement concrete reinforced / (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for Reinforced concrete pipes, 600 mm dia ,class NP3, laid and jointed complete with collars. incl Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation bed to drain pipes of 150 mm mm bore, including packing under and haunching against the sides of sides of pipes after theu are laid and tested complete all as specified & directed.

M &L for PCC 1:2:4 type B-1 (using 20 mm graded stone crushed agg) as in channel benching of manhole laid to slope and shape as required complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) in foundation /Bed of manhole ,filling and mass concrete all as specified and directed.

M &L for brick work with sub class 'B' Bricks straight or cureved on plan exc. 6 mtr mean radius built in cement mortar (1:4).including demolition of exsiting brick work complete al;l as specified and directed

M & L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone agg) in coping ,Bed plates etc. all as specified and directed.

M&L for pre cast Factory made reinforced RCC cover slab M-35 Gde complete all as specified and directed. (Thickness & size directed by Engineer-in-Charge) Make:- Tulip, Jain tiles, NTC

M & L for rubberised chequered polished cement tiles heavy duty, 30CM X 30CM X 25 mm thick, set, jointed in neat cement slurry and pointed in grout to match the floor complete all as specified. & directed, including screed bed or bedding layer or mortar 15 mm thick in cement mortar 1:6 complete all as specified and directed Make:- Tulip, Jain tiles, NTC

M & L PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in sub base filling and mass concrete complete finished evenand fair all as specified and directed.

M & L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe-290 (Gde E-165)

S&F Mild steel sliding door bolt 200 mm plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as spfd and directed .

S&F Mild steel pressed handles 150mm Ovel type handles,stove enamelled black

M&L for PCC 1:2:4 type B2 (using 20 mm graded crushed stone aggregate) in foundation for post holes.

S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works conforming to Fe 290 Gde E- 165.

S&F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fixed with washers and one hexagonal or square nut, exc. 22.5 mm but n exc. 30 mm long dia of shank 11 to 15mm.

S&F PVC coated MS galvanised chain link fencing of weight not less than 4.0 kg/sqm, PVC coating of 1.5mm and mesh size of 50 x 50mm of any type of standard rail straining bolts etc aperture and dia as decided by Engineer-in-charge.

S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed

M&L for Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed

M&L for Preparation of surfaces of wall and applying two coats of weather coat exterior paint over a coat of primer complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Taking down old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed.

Taking down old unsv T/L, Lamp,Security light of any size and capacity

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in Non metalic pvc not less than 25mm dia concealed in wall with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following including taking down old unsv point wiring with connected accessories. Make of wire:Havells/ Polyacab /Grandlay/SCI/Anchor Make of conduit: AKG Plastic Pvt Ltd./Bhagwati Plastic & Agriculture industry /Polycab Note : (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No. 133 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix modular switch 1 way 6A, 1 Module Make : Havells (Athena )/Legrand( Arteor)/Schnieder( Zencelo)

Supply and fix modular switch 1 way 16A, 1 Module with indicator lamp Make : Havells (Athena )/Legrand( Arteor)/Schnieder( Zencelo)

Supply and fix modular socket 6A, 2/3 pin combined 2 Module Make : Havells (Athena )/Legrand( Arteor)/Schnieder( Zencelo)

Supply and fix modular socket 6A/16A, 2/3 pin combined 2 Module Make : Havells (Athena )/Legrand( Arteor)/Schnieder( Zencelo)

Supply and fix modular fan regulators step type 2 module 120W Make : Havells (Athena )/Legrand( Arteor)/Schnieder( Zencelo)

Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay

Supply and Fix LED 1 x 1 feet Surface/recess mounted light fitting of lumens 1800 lumens ,CRCA housing, fully diffused ,polycarbonated diffuser, ,system efficacy 100L/W including,connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose complete all as specified and directed . Make: - HAVELLS/CROMPTON/PHILIPS

Supply and Fix in repair LED street/Security wall mounted light fitting of lumens 2550 lm ,Single Piece High pressure die cast aluminium,system efficacy 110L/W,Epoxy powder coated with any additional treatment for smooth and anti corrosive finish, fully diffused ,Polycarbonated Cover for More protection ,inbuilt electronic driver IP 66 ,High bright LED with Lens, colour temp Not less than 5700 Cool Day Light,colour rending index not less than 70 ,life not less than 50000 hrs,inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz ,surge protection minimum 4 KV, including connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv light fitting complete all as specified and directed. Make: - PHILIPS /CROPTON/WIPRO/PHILIPS

Supplying, fixing & testing LED 36 Watts,2'x2' recessed ceiling light fitting,warm /natural/ cool white as per requirement at site with glare free uniform illumination with electronic driver etc and all accessories pre wired including connecting to source complete all as specified & directed. Make- POLARIS NIO I-II of Crompton/VENUS NEO 2X2 of Havells/SmartGlow of Philips as approved.

Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Brushless direct current motor (BLDC) suitable size of fan hanging hook including taking down non BLDC fan and deposited to the MES store. Make :Model Stealth Air BLDC of Havells / Model Silent pro -Enso of Crompton/Renesa of Atomberg

S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Make:- Havells, Grandlay, SCI. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit.

2 x 10 Sqmm + 1 x 10 sqmm

2 x 4 + 1x4 Sqmm

Supply and fix exhaust Fan ,made of sturdy Engineering plastic complete with louvers shutter,voltage 230volts ,50HZ,RPM 1200,copper winding of sweep 250 including cutting holes on wall and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. Make:- Crompton, Havells, Orient

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I (2009) all as specified and directed.(one earthing for each main Panel )

S and F sheet metal enclosure double door type ISI marked MCBs DB SPN(Single pole and neutral) 240V AC 16 way with 200 Amps rated bus bar all as specified and directed. Make:- Havells, Indo Asian, HPL.

S & F REO modular AC MCB box protected socket PVC Plastic base three- Module including 25 Amps Plug top and MCB 25 Amps Fixed in repair complete all as specified and directed Make:- Havells, Indo Asian, HPL.

S and F 240 Volts ,10KA” B” curve miniature circuit breaker (MCB SP) of single pole/double pole of folowing current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. Make:- Havells, Indo Asian, HPL.

MCB SP 240 volts, 50 Hz capacity 6-32 Amps

SPN 240 volts, 50 Hz capacity 63 Amps

S & F in repair Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection,415 volt ,suitable for fixing FP MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings of following capacity and making good the distrubed surface complete all as directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relavant items of this schedule) Make:- Havells, Indo Asian, HPL.

4 Way VTPN DB (FP MCCB +12 MCB,C). Make :legrand Cat No. 507745 equvilent in L&T, ABB, Schneider

S & F MCCB ,4 pole ICS=100% ICU at 415 volts with rupturing capacity 16 KA with thermal-magnetic release and adjustable overload setting . The MCCB shall have a Mechanical life = 40000 operations & Electrical life = 8000 operations of following capacity complete all as directed. Make:- Havells, Indo Asian, HPL.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sq mm 4 core in 50 mm dia LDPE pipe in trench up 45 cm depth all as specified and directed. Make:- Havells, Grandlay, SCI.

Supply and Fix LED batten light fitting 4 feet of lumens 2500 lumens, wall mounted ,high pressure die cast alluminium, fully diffused ,system efficacy 125L/W ,polycarbonated diffuser,IP-20 ,high bright LED lamp, colour temp not less than 5700 Cool Day Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2.5KV including,connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose complete all as specified and directed . Make: - HAVELLS /CROMPTON/PHILIPS

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I (2009) all as specified and directed.(one earthing for each DBl )

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core in 50 mm dia LDPE pipe in trench up 45 cm depth all as specified and directed. Make:- Havells, Grandlay, SCI.

G S CONSTRUCTIONS (BID ID -3104858)

M/S PUNDIR BUILDERS (BID ID -3118406)

Sharda Enterprises (BID ID -3099972)

ACE BUILDERS AND CONTRACTORS (BID ID -3103410)

M/S S P BUILDERS (BID ID -3102988)

V R Associates (BID ID -3099640)

K S CONSTRUCTIONS (BID ID -3102691)