CA NO CWE/ HILLS / PGH/76 OF 2020-2021 ADDITION ALTERATION IMPROVEMENT OF CERTAIN OFFRS/JCOs/ORs Md ACCN AT PITHORAGARH UNDER GE PITHORAGARH

Amount

S & F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S & F in repairs vitreous china wall mounted wash down water closet with builtin flushing cistern and closet seat cover including all necessary fittings and making good to wall surfaces complete all as specified and as directed.

S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.

All as per item No. 04 herein before but except material with and including dismantling of steel rolled sections, complete all as specified and directed

M&L for coloured non-skid, joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match including dismantling of existing floor hearth complete all as specified and directed.

M&L for coloured non-skid, joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match including dismantling of existing floor hearth complete all as specified and directed.

M&L for coloured joint free glazed ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, as in vertical surfaces like skirting / dado etc. set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match including dismantling of existing wall hearth complete all as specified and directed.

M&L for vitrified tiles, double charge, coloured, joint free, square or rectangular in shape, 8 to 10mm thick, area of each tile not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match including dismantling of existing floor hearth complete all as specified and directed.

M&L for vitrified tiles, double charge, coloured, joint free, square or rectangular in shape, 8 to 10mm thick, area of each tile not exceeding 0.36 sqm, as in skirting / dado etc. set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match including dismantling of existing floor hearth complete all as specified and directed.

M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for anti termite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a ownward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed.

Demolition of reinforced cement concrete in RCC slab, shelves / chajja etc. n. exc. 15 cm thickness (below or above GL), complete all as specified and directed.

S&F in repairs 6mm thick glass corner shelf assembly, fancy type of size 250x250mm fixed with and including chromium plated brass screws and plastic royal plugs, complete all as specified and directed

Taking down & re-fixing of shutter in same opening after easing and adjusting shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

S&F in repairs 15mm bore, brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed

Supply only 15mm bore, brass chromium plated basin mixer swan neck type for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed

S&F soap dish, chromium plated steel / stainless steel of size 160x160x1mm thick, fixed to wall with plug & CP brass screws, complete all as specified and directed.

S&F 5mm thick glass shelf / mirror shelf, fancy type of size 600mm including chromium plated grills, fixed with and including chromium plated brass screws and plastic royal plugs, complete all as specified and directed

S&F in repairs, jointing and testing galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:- (a) 15 mm dia bore

(b). 20mm dia bore.

(c). 25mm dia bore.

Refixing old serviceable steel tubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed for following size of pipe :- Note :- Serviceable pipe shall be re-used under this item, obtained from serial item no. 22 to 22.1. (a) 15 mm dia bore

(b). 20mm dia bore.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed.

S & F in repairs 15 mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs 15 mm bore stop valve cast copper alloy, fancy type, chromium plated with long shank and cup, screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S & F in repairs 15 mm bore stop valve cast copper alloy, fancy type, chromium plated with long shank and cup (Concealed type), screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S&F 20 mm dia gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed .

S&F 25 mm dia gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed .

M&L for cutting of existing pipe and making threading and suitable work for connection of pipe, complete all as directed .

S&F stainless steel kitchen plate rack of size 720x600x230mm, made from 1mm thick steel sheet, complete all as specified and directed.

S&F PVC cabinet mirror of size 350x450mm size, fixed on wall with steel screws & PVC rowl plugs, complete all as specified and directed.

S&F in repairs vitreous china counter top wash basin oval shape white, size 550x400 mm, including fixing taps, with & including 32 mm dia PVC waste pipe, waste coupling and 15-18mm thick granite top, over RCC slab, complete all as specified and directed. Note- Basin mixer shall be measured and paid as supply only under item no.19 of BOQ.

M&L for RCC 1:1.5:3 (Nominal Mix) type A-1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, chajja, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping / benching / steps etc including weathering and throating including necessary form work etc., complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in surface channels and drain, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

Supply only 3mm dia GI wire chain link fencing with 75x75mm mesh size and fixed to any type of stranded rails, straining bolts including provision of binding wire etc., complete all as specified and directed.

S&F in repairs 19/20mm thick block board interior grade, commercial type, fixed with screws / welding to timber / iron frame work as in kitchen / cupboard / cabinet shutters including provision of 0.9mm thick decorative laminations of approved colour & pattern with and including teak wooden leaping 6mm thick around the shutter, fixed with screws to timber / iron frame work including continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm with welding the same along with existing steel door frame with nails to timber frame work, complete all as specified and directed.

S&F in repairs 500 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position including making connections complete all as specified and as directed.

S&F in repairs 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position including making connections, complete all as specified and as directed.

S&F wood-plastic composite (WPC) door frames of size 125x65mm, building grade (density 780 Kg/Cum) with decorative (Colour as approved by GE), double pattern in opening, complete all as specified and as directed.

S&F wood-plastic composite (WPC) door frames of size 100x65mm, building grade (density 780 Kg/Cum) with decorative laminates (Colour as approved by GE), single pattern in opening, complete all as specified and as directed.

S&F wood-plastic composite (WPC) door frames of size 63x51mm (density 780 Kg/Cum) with decorative laminates (Colour as approved by GE), suitable for cup board openings, complete all as specified and as directed.

S&F wood-plastic composite (WPC) door frames of size 75x50mm (density 780 Kg/Cum) with decorative (Colour as approved by GE), single pattern in opening, complete all as specified and as directed.

S&F factory made, 30mm thick, PVC solid moulded door shutter (Stiles) with 2. 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick moulded PVC sheet on back side face and both side decorative laminates PVC sheet, fixed in frame at site as per specification and drawing (Refer SSR Part-I), complete all as directed..

S&F factory made solid panel PVC door shutters, both side decorative laminates PVC sheet, 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement with wood grain printed PVC sheet used instead of plain colour PVC sheet & 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10x10mm (90 degree) used instead of exposed portion of PVC sheet beading, supply and fixing in the frame at site as per specification and drawing (Refer SSR Part-I), complete all as directed.

All as per item no.47 but wire gauged i.e panel will be of wire gauge in lieu of wood grain printed PVC sheet panel the wire gauge shall be wrapped on additional square 8mm MS solid tube and this tube shall be welded to MS tube and wire gauge shall be stretched as such a way so that it tightened firmly including S&F wire gauge etc complete all as directed

S&F 24mm thick factory made solid uPVC flush cupboard shutters, made from co-extruded three layers rigid foam sheet (single extruded process) with 0.80 to 1mm thick outer face layer having density not less than 1400 Kg/Cum and density of central core material not less than 600 Kg/Cum and fixing in frame at site and including 03 Nos. stainless steel hinges, 02 Nos. stainless steel fancy handle, 02 Nos. stainless steel tower bolt, ball catches with 8mm dia steel ball and brass body and striding plate including letting and inbuilt locking device with key etc. as in cup board, complete all as directed.

S&F casement window with net & grill single of multi shutter turn window are made out of UPVC multi-cavity frame sections of 60x60x2.5mm suitable reinforced and double multi shutters division are made by using sash mullion having 50x64x2.5mm multi-cavity uPVC section, suitably GI reinforced and shutters will be made from UPV section of size 50x85x2.5mm, reinforced and welded in corners with EDPM gasket, provision for glass and for air tight at frames and outer side of shutters with style glazed window shutter with and including suitable size glass beading, hinges, handles, stay etc complete. Mosquito mesh shutter shall be made from UPVC extruded section of size 61x27x2mm with GI channel of 1.2mm thick, welded in corners, mosquito net shall be of fibre be fitted in shutter in shutter with proper required accessories like hinges, MS grill of 12mm round pipe be inserted in main frame & screwed by hidden screwing system with powder coating etc, complete all as directed. factory made solid panel PVC door shutters, both side decorative laminates PVC sheet, 25 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement with and including 03 Nos. stainless steel hinges, 02 Nos. stainless steel fancy handle, 02 Nos. stainless steel tower bolt, ball catches with 8mm dia steel ball and brass body and striding plate including letting and inbuilt locking device with key etc. as in cup board, complete all as directed.

S&F in repairs 10 litres capacity, PVC flushing cistern, low level including PVC waste coupling & PVC flush pipe of 32 mm dia of suitable length and complete internal macanism including brackets, complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for embedding hold fasts complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running railsand guides) and hanging, also fastening and fixing complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars including demolition of existing unserviceable drain pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2 as in drain pipes including forming cradles, suitable for 200mm bore of pipe, complete all as specified and directed.

S&F in repairs 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed to wall with PVC holding clamps, complete all as specified and directed.

S&F in repairs 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed to wall with PVC holding clamps, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bends, any radius with access door, complete all as specified and directed.

S&F in repairs PVC (SWR), 75mm bore junction, single (Single Tee), equal or unequal, complete all as specified & directed.

S&F aluminium peg sets of six, complete all as specified & directed.

S&F in repairs PVC (SWR), 125/110mm bore 'P' Trap, complete all as specified & directed.

S&F 15 mm bore PVC connection 450 mm long with PTMT nut and PVC washer, complete all as specified and directed.

S&F in repairs brass chromium plated toilet paper holder, fixed with PVC rowl plugs & brass screws, complete all as specified & directed.

S&F in repairs PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed with cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl 75mm bore, complete all as specified & directed.

S&F in repairs brass chromium plated shower rose with or without swivel joints 125 mm size including fixing to iron pipes or union, complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed.

S & F 35mm thick second class hard wood glazed and skeleton door shutter open rebated and prepared to receive glass or gauge etc (Without sash bar) edges of framing plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters shall be as specified in SSR Part-I 2009 section 8 clause 8.24(a).

S & F 30mm thick second class hard wood glazed and skeleton door shutter open rebated and prepared to receive glass or gauge etc (Without sash bar) divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters shall be as specified in SSR Part-I 2009 section 8 clause 8.24(a).

M&L for 1.25mm thick pressed steel frames of 125x60mm size suitable for doors with one or more rebates including necessary fixing lugs, hinges (125mm size-06 Nos. & 75mm size-02 in each door frame), lock strike plate etc. including one coat of red oxide primer & PCC 1:3:6 type C-0 be fiiled in door frame, complete all ass specified and directed.

M&L for 1.25mm thick pressed steel frames of 105x60mm size suitable for doors with one or more rebates including necessary fixing lugs, hinges (125mm size-06 Nos. & 75mm size-02 in each door frame), lock strike plate etc. including one coat of red oxide primer & PCC 1:3:6 type C-0 be fiiled in door frame, complete all ass specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick teak wooden leaping around the shutter, complete all as specified and directed.

Excavation in soft / loose soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed.

Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

S & F of mild steel screw bolt dia of shank 10 mm (machine made) n. exc. 10 cm in length, with haxagonal or square head at one end and screwed the other or screwed both ends, each screw end to be fitted with washer etc. complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern flush pipe with and including PVC seat cover (same colour of WC pan) & water jet, and connection to drain or outgoing pipe, antisyphonage pipe, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick decorative lamination both sides (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawings.

S & F butt hing 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed.

S&F for 200 mm mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed complete all as specified and directed.

S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F for 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for 200 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Mild steel sliding door bolt of size 300mm bolt type stove enamelled black with bright not lessthan 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed, complete all as specified and directed.

S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 200 mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 200mm size mild steel pressed handle oval type stove enamalled black, complete all as specified and directed.

S & F of galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

M&L for applying a coat of polymer based water proofing compound as per manufacturer's instruction on new plaster surface of wall / chajja etc., complete all as specified and directed.

M&L for makrana white marble slab work, 18-20mm thick (Table rubbed and polished), as in steps, jambs, pillars, window cills, cooking & wash basin plateforms and like, set in CM 1:4 including pointing in white cement 1:2 using marble dust with mixture of pigment to match with shed of marble with & including 15 mm thick screed bed of CM 1:4 including rounding the exposed edges of slab, complete all as specified and directed.

M&L for granite marble slab work, 18 to 20mm thick (Table rubbed and polished), as in steps, jambs, pillars, window cills, cooking & wash basin plateforms and like, set in CM 1:4 including pointing in white cement 1:2 using marble dust with mixture of pigment to match with shed of marble with & including 15 mm thick screed bed of CM 1:4 including rounding the exposed edges of slab, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, laid over and including PCC 25mm thick, 1:2:4 type B-0 as in sub base and 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

All as per item No. 95 herein before but on vertical surfaces such as dado / skirting, steps etc. over and including 10mm thick rendering in CM (1:4), complete all as specified and directed

M&L for rubber moulded coloured chequrred cement concrete tiles, 20mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm with grey cement and pigment, set, jointed and pointed in neat cement slurry as in floors, laid over and including 15mm thick screed bed in cement mortar 1:6 with and including 75mm thick PCC 1:2:4 type B2 (Using 40mm size graded stone crushed aggregate) as in sub base, complete all as specified and as directed.

M&L for rubber moulded exterior grade, joint less coloured chequrred cement concrete tiles, 10mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm with grey cement and pigment, set, jointed and pointed in neat cement slurry as in floors, laid over and including 15mm thick screed bed in cement mortar 1:6 with and including 75mm thick PCC 1:2:4 type B2 (Using 40mm size graded stone crushed aggregate) as in sub base, complete all as specified and as directed.

Supply only water proofing compound, complete all as specified and directed.

M & L for water proofing treatment over RCC roof by 3mm thick APP modified polymeric water proofing membrane (weight not less than 3 Kg/sqm) over & including 15 mm thick rendering in cement mortar 1:4 on concrete surfaces, finished the surfaces even and smooth including mixing of water proofing compound @ 3% by weight of cement over a bituminous shalitex primer @ 0.30 Kg/sqm evenly over a coat of hot bitumen 85/25 @ 1.2 Kg/sqm. The membrane shall be unrolled and bonded completely to the substrate (with overlap of 100mm on the transverse direction and 75mm on longitudinal direction and sealed by flame) and the overlaps sealed / fused by flame as per manufacturer instructions. A coat of hot bitumen grade 85/25 @ 1.2 Kg/sqm shall also be applied on top of APP modified polymeric membrane as per manufacturer instructions and finally it will be finished with a coat of aluminium paint @ 0.200 Kg/ Sqm, complete all as specified and as directed Note :- Water proofing compound shall be measured & paid separately under respective items.

M&L for PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete (as in sunken floor) with and including demolition of existing PCC from sunken portion and removed the same to a distance as directed by Engr-in-Charge, complete all as specified.

M&L for 40mm thick PCC 1:2:4 type B-0, using 12.5mm graded stone aggregate mixed with integral water proofing compound (As per manufacturer's instructions) as in bottom surface of sunken portion with proper slope towards spout pipe with and including 15mm thick rendering in CM 1:3 mixed with integral water proofing compound (As per manufacturer's instructions) on vertical surfaces when concrete is green. After laying sewage / plumbing pipes in position , two coats of OMIPLAS EP-101 epoxy compound shall be applied, complete all as directed. Note:- (i) Water tightness test shall be carried out by ponding test for 72 hours & defects (If any) observed shall be rectified by the contractor at his own cost as directed by Engr-in-Charge. (ii) The process of grouting & ponding test shall be repeated until leakage / seepage / dampness of sunken portion not stopped.

S&F 25mm dia GI pipe, medium grade as in spout pipe, jointing and testing for leakage proofing from around the spout pipe, grouting in wall by making hole of suitable dia and making good the disturbed surfaces of wall with existing finish, complete all as specified and as directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

M&L for preparation of old existing wooden decorated surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint on old wooden surfaces, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

M&L for preparation of old existing steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint on old steel surfaces, complete all as specified and directed.

S & F in repairs decorative (Wooden finish) curtain rod made of mild steel pipe (Medium Grade) covered with coloured PVC coating layer, 25mm dia including PVC decorate end brackets (02 Nos. in each curtain road), complete all as directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for 15mm thick cement plaster on fair faces of brick work or concrete surface on walls in CM 1:6 finished the surfaces fair & even, complete all as specified and directed.

M&L for 15mm thick cement plaster on external surfaces of brick work or concrete surface on walls in CM 1:4 finished the surfaces fair & even with using water proofing compound, complete all as specified and directed. Note:- water proofing compound will be measured and paid separately under respective items of BOQ.

M&L for 10mm thick cement plaster on fair faces of concrete surface of ceilings, soffit, chajja projection in CM 1:4 finished even and smooth without using extra cement, with and including scaffolding (If any required at site) complete all as specified and directed.

Demolition of precast cement concrete block walling built in cement mortar, complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed.

S&F bottle trap 32 mm bore dia of discharge of PTMT having minimum water seal 25mm minimum weight 260 gms, complete all as speciifed and directed.

S&F 5.5mm thick figured sheet glass, ordinary quality and glazing with oil putty or rubber & aluminium beading in square n. exc 0.5 Sqm in each pane, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate), 75 mm thick as in plinth protection laid as to bays finished even and smooth without using extra cement including forming necessary joints 12mm wide to the full depth of PCC at every 3 m and at change in direction, complete all as specified and directed.

M&L PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate), 75 mm thick as in paving / path / hard standing etc., laid as to bays finished even and smooth without using extra cement including forming necessary joints 12mm wide to the full depth of PCC at every 3 m and at change in direction, complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 as in cover slab, chajja, shelves and similar articles with plain faces including chamfers, weatherings, throating etc. and setting in cement mortar 1:4, complete all as specified & directed.

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old decorative surfaces of ceilings by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coats of white wash, complete all as specified and as directed.

M&L for preparation of old decorative surfaces of wall by complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper of white or tinted, over & including a layer of wall care putty (average thickness 2mm) finished smooth, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulson (Weather proof coat) of white or tinted over a coat of primer with and including a layer of wall care putty (average thickness 2mm) finished smooth, complete all as specified and directed.

M&L for preparation of old decorative surfaces of wall by complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coats of exterior emulson (Weather proof coat) of white or tinted over a coat of primer with and including a layer of wall care putty (average thickness 2mm) finished smooth, complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by brooming down or steel wire brushing, moulds, moss and efflorescent salts etc and applying two coats of oil bound distemper of white or tinted, over & including a layer of wall care putty (average thickness 2mm) finished smooth, complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceilings by complete removal of existing treatment by brooming down or steel wire brushing, moulds, moss and efflorescent salts etc and applying two coats of oil bound distemper of white or tinted, over & including a layer of wall care putty (average thickness 2mm) finished smooth, complete all as specified and directed.

S&F hand shower (Health faucet) 1.00m PVC tube with wall hook, suitable for EWC, complete all as specified and directed.

S & F in repairs 15 mm bore two way bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

M&L for form work to soffits of suspanded flat slab such as roof slabs, floor slabs, landing, shelves and similar work n. exc. 200mm thick (horizontal or sloping), finished the surfaces rough, complete all as specified and directed.

M&L TMT bars, 6-8mm, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F in repairs, pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an approved colour, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified, complete all as directed.

S&F in repairs, pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an approved colour, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified, complete all as directed.

S&F in repairs GI powder coated snap grid frame work for false ceiling comprising of the following sections for making partitions of 600x600 mm size, fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -38mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.30 mm (iii) wall angle - 24mmx24mmx0.30mm Make :- Everest Industries / Armstrong / RAMCO Industries

S&F in repairs 4mm thick E-Board Classic for insulation purpose of 595x595mm in size, moisture & fire resistant, self embossed elegant design, fixed with staples on snap grid as in ceiling, complete all as specified and as directed. Make :- Everest Industries / Armstrong / RAMCO Industries

M&L for standard aluminium section, powder coated of approved colour, suitable for door / window frames & shutters, sliding / fixed shutters and partition, lovered etc with one or more rebates including joining cleat for fixing, rubber beading / lining, pivot, locking arrangement and fixed in position with stainless steel screws, complete all as specified and directed

S&F in repairs 125mm sizes stainless steel butt hinges medium weight, complete all as specified and directed.

Taking down carefully Copper/Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down carefully by disconnecting electrical connection, main switches / distribution board / MCB DB with MCBs of any rating, removing dismantled material from site and making good disturbed surface of walls to match with existing complete all as specified and directed..

Taking down Sub main wire including GI earth wire of any size, fixed in any position, complete all as specified and directed.

M&L for concealed point wiring surface type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic concealed PVC conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with brass screws, cup washers, complete all as specified and directed for the following :- (a) One light point/ exhaust / ceiling fan point/bell point controlled by one, one way switch of 5/6 Amps complete all as specified and directed.

(b) One 3 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed.

(c) One 3 pin 5/6 amps socket out-let point on same board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed.

(d) One light point controlled by two way switch, complete all as specified and directed.

All as per item No. 143 herein above but with 2.5 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete all as specified and directed.

S&F switch piano flush type, single pole, one way 5/6 Amps complete all as specified and directed

S&F in repairs switch piano flush type, single pole, one way 5/6 Amps complete all as specified and directed

S&F socket out let, two in one 3 pin 5/6 Amps and 2 pin 5/6 Amps , flush type, non shutters, non interlocking, complete all as specified and directed

S&F in repairs socket outlet two in one 3 pin 5/6 and 3 pin 15/16 amps (multipurpose), flush type non shutter, non inter locking type complete all as specified and directed

S&F in repairs switch piano flush type, single pole, one way 15/16 Amps complete all as specified and directed

S&F fan regulator, electronic rotary , flush type, step type, 300 watts, 230 volts, 50 Hz, complete all as specified and as directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminals complete all as specified and as directed.

S&F 5 watts decorative ultra slim linear LED lighting fixture with extruded aluminium heat sink, environmental friendly, energy efficient, complete all as specified & directed.

S&F in repairs 10 watts LED bulk head fitting with PDC aluminium housing and milky diffuser with and including 10 watts LED lamp etc complete all as specified & directed.

S&F in repair LED integrated batten T5 box type surface mouted, 1x18 Watt prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

S&F in repair LED integrated batten T5 box type surface mouted, 1x9 Watt prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

S&F in repair MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed.

S&F in repair MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed.

S&F in repair MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed.

S&F MCB single pole, 240 volts, C Curve, 6-32 Amps of 10 KA, complete all as specified and directed.

S&F MCB single pole & neutral 240 volts, C Curve, 40 Amps of 10 KA, complete all as specified and directed.

S&F MCB triple pole & neutral, 240 volts, C Curve, 63 Amps of 10 KA, complete all as specified and directed.

S&F electric bell, multi music type AC 230 Volts complete all as specified and as directed.

S & F switch bell push button type 5 Amp single pole complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for laying under ground cable, not exceeding 10 sqm on plan and getting out in soft / disintegrated rocks, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for laying under ground cable, not exceeding 10 sqm on plan and getting out in hard / dense soil, complete all as specified and as directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

M & L for laying of dry, clean fine sand as in cushion or filling in trenches around underground cable, in ducts, inside sub station complete all as specified and directed.

Supply & laying of sub class ‘B’ old size bricks, laid flat i.e length of brick shall be laid across the length of cable for protection of under ground cable complete all as specified and directed.

Supply and laying 40mm bore, GI pipe, light grade, laid under roads / drain / culvert, fixed to poles, walls with & including flat iron clamps bolts / nuts / washers / fittings (if any), complete all as specified and directed.

S&F for sub main wiring with PVC insulated, unsheathed two single core cable 1100 volts grade with copper conductor of size 2x6.0 sqmm of code Red for phase, black for neutral & green for earth, multi stranded drawn into & including suitable dia PVC conduit with and including 6.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: (i) Cost of PVC conduit and accessories shall be deemed to be included in quoted rates. (ii) Two runs of 6 sqmm cable and one run of 6.0 sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

S&F PVC exhaust fan complete heavy duty with self louvers shutters AC single phase 230 Volt of size 300 mm sweep by grouting both ends in wall up to required length, including making hole of suitable size & making good disturbed surfaces of wall and connecting with flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to exhaust fan complete all as specified and as directed

S&F 25 litres capacity water heater (Geyser) storage type, BEE 5 star rated with and including grouting 04 Nos. bolts, nut & washers in wall with and including 02 Nos. chromium plated PVC connection, suitable for hot & cold water & making connection complete all as directed.

Supply, laying, testing of 1100 volts grade heavy duty under ground cable, XLPE insulated, multi stranded aluminium conductor PVC bedded, galvanised steel strip or wire armoured electric power cable, heavy duty of cross sectional area 16 sqmm, 4 core, fixed on pole / wall / trenches including making cable connection with required connecting material like cable lugs, cable gland, nut, bolts & washer etc, complete all as specified and as directed. Note :- (i) Excavation & earth work shall be measured and paid separately under respective items of BOQ.

S&F in repairs LED 1x20 watt security light fitting , pressure die-cast aluminium including fixing the same with 25mm dia GI pipe light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x4mm duly painted and suitable size of nut & bolts etc. and making electrical connection with three core copper flexible wire of 0.50 Sqmm upto ceiling rose, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600X600X6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 Part–I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4, type B1 & pit cover, 75mm thick in RCC 1:2:4, type B1 dully reinforced with 6mm dia bar @ 150 mm c/c both ways including with two Nos. lifting handle of MS round bar 10 mm dia and earth lead with and including GI protection pipe light grade 15 mm dia up to 7.5 m from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

S&F 15 mm bore angle valve cast copper alloy, chromium plated, screwed down high screwed one ends for iron pipes or for union complete all as specified and directed.

S&F floor door stopper, over all length of cover plate 150 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in door, complete all as specified and directed

S&F 50mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed to wall with PVC holding clamps, complete all as specified and directed.

S&F in repairs 50 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M/s J P Traders

m/s harish kumar punera