TVC Division - Proposed new Halt Station near Cochin Airport

A-List of items of works covered by the CPWD Delhi Schedule of rates 2021 (DSR Above/

B-List of items of works covered by the CPWD Delhi Schedule of rates 2021 (DSR

A1-List of items of works covered by the CPWD Delhi Schedule of rates 2021 (DSR Above/

except reinforcement steel

Item- 1 SW - I: New halt station near Cochin Airport

S No. Item No Description of Item Unit Qty Rate Amount

1.0 CARRIAGE OF MATERIALS

By Mechanical Transport including loading,unloading and

1.1.2 Earth

2.0 EARTH WORK

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in

2.6 depth, 1.5 m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in-charge.

2.25 Filling available excavated earth (excluding rock) in cum 15000 253.95 3809250

trenches, plinth, sides of foundations etc. in layers not

5 exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete of

4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from cum 540 6670.25 3601935

6 natural sources: 6 graded stone aggregate 40 mm nominal

size derived from natural sources)

THIRUVANANTHAPURAM DIVISION-GATI SHAKTI/SOUTHERN RLY

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from cum 245.2 6326.05 1551147.46

7 natural sources : 8 graded stone aggregate 40 mm nominal

size derived from natural sources)

5.0 REINFORCED CEMENT CONCRETE

5.9S FORM WORK

Centering and shuttering including strutting, propping etc.

and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. for mass Sqm 15963 307.95 4915805.85

5.9.2 Walls (any thickness) including attached pilasters, Sqm 218 669.55 145961.9

butteresses, plinth and string courses etc.

5.33S DESIGN MIX CONCRETE

Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced cement

concrete work; using coarse aggregate and fine aggregate

derived from natural sources, Portland Pozzolana / Ordinary

Portland /Portland Slag c e m e n t , admixtures in

recommended proportions as per IS: 9103 to accelerate /

retard setting of concrete, to improve durability and

workability without impairing strength; including pumping

of concrete to site of laying, curing, carriage for all leads;

but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-

charge; for the following grades of concrete. Note: Extra

cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case

the cement content in design mix is more than 1.10 times

of the specified minimum cement content, the contractor

shall have discretion to either re-design the mix or bear the

cost of extra cement.

5.33.1 All works upto plinth level

5.33.1.1 Concrete of M25 grade with minimum cement content of cum 1778 8683.8 15439796.4

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content of cum 32.02 10306.2 330004.52

5.35 Add for using extra cement in the items of design mix over Quintal 2 688.45 1376.9

and above the specified cement content therein.

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth in:

7.0 STONE WORK

7.1S RANDOM RUBBLE MASONRY

Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1

cement : 6 coarse sand : 12 graded stone aggregate 20

mm nominal size) upto plinth level with :

8.0 CLADDING WORK

Stone tile (polished) work for wall lining over 12 mm thick

bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

cement slurry @ 3.3 kg/sqm including pointing in white

cement complete.

Providing and fixing machine cut, mirror/ eggshell polished

, Marble stone work for wall lining (veneer work) including

dado, skirting, risers of steps etc., in required design and

pattern (if required with marble stone slab pieces of

different shapes, sizes & texture but of even thickness) on

12 mm (average) thick cement mortar 1:3 (1 cement : 3

coarse sand) laid and jointed with white cement slurry @

3.3 kg/sqm including pointing with white cement slurry

admixed with pigment of matching shade, including

rubbing, curing, polishing etc. all complete as per

Architectural drawings, and as directed by the Engineer-in-

8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso Sqm 120 9278.95 1113474

verona, Fire Red or Dark Emperadore etc.

8.20S STONE WORK DRY CLADDING

THIRUVANANTHAPURAM DIVISION-GATI SHAKTI/SOUTHERN RLY

8.31 Providing and fixing Ist quality ceramic glazed wall tiles Sqm 37.8 1063.45 40198.41

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

16 approved by Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement

mixed with pigment of matching shade complete.

9.0 WOOD AND P.V.C. WORK

9.105S GYPSUM BOARD PARTITIONS

9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Metre 15 702.6 10539

Door Frames of cross-section 90 mm x 45 mm having

single rebate of 32 mm x 15 mm to receive shutter of 30

mm thickness. The laminate shall be moulded with fire

17 resistant grade unsaturated polyester resin and chopped

mat. Door frame laminate shall be 2mm thick and shall be

filled with suitable wooden block in all the three legs. The

frame shall be covered with fiber glass from all sides. M.S.

stay shall be provided at the bottom to steady the frame.

9.122 Providing and fixing to existing door frames.

9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled Sqm 4.2 3496.75 14686.35

door shutter of required colour and approved brand and

manufacture, made with fire - retardant grade unsaturated

polyester resin, moulded to 3 mm thick FRP laminate for

18 forming hollow rails and styles, with wooden frame and

suitable blocks of seasoned wood inside at required places

for fixing of fittings, cast monolithically with 5 mm thick

FRP laminate for panels conforming to IS: 14856, including

fixing to frames.

Providing and fixing factory made 30 mm thick door

shutter made of solid PVC foam profile. The styles & rails

shall be of size 75 mm x 30 mm having wall thickness 5

mm. The styles, top & bottom rails shall have one side wall

thickness of 15 mm integrally extruded on the hinge side

of the profile for better screw holding power. The styles and

rails shall be reinforced with M.S. tubes of size 33 mm x 17

mmx 1 mm, painted with primer , all four corners of

reinforcement to be welded or sealed. Solid PVC extruded

bidding (push fit type) will be set inside the styles and the

rails with a cavity, to receive single piece extruded 5mm

PVC sheet as panel. The styles and rails will be mitred cut

and joint with the help of PVC solvent cement & self driven

self tapping screws. Single piece extruded solid PVC lock

rail of size 100 mm x 30 mm with wall thickness 5 mm &

15 mm integrally extruded in the middle of the lock rail &

fixed with styles with the help of PVC solvent cement & self

driven self tapping screws of size 100mm x 8 mm complete

as per manufacturer's specifications and direction of

Engineer-in-charge.

19 9.124.2 Decorative finish (both side wood grained finish) Sqm 3.36 3194.4 10733.18

Providing and fixing wire gauge shutters using stainless

steel grade 304 wire gauge with wire of dia 0.5 mm and

9.134 average width of aperture 1.4 mm in both directions for

doors, windows and clerestory windows with necessary

9.143 Providing and Fixing factory made uPVC door frame, made Metre 10.4 545.6 5674.24

of uPVC exturded sections, of size 65 mm x 55 mm with

wall thickness 2.0 mm (+/- 0.2 mm), corners of the door

frame to be mitred cut and jointed with plastic brackets

and stainless steel screws, reinforcing hinge side vertical of

the frames with PVC profile of Size 28 mm x 30 mm having

wall thickness 2 mm (+/-0.2 mm), including providing &

fixing 3 nos of 125 mm long stainless steel hinges to the

frame, fixing the frame with jamb with required number &

size of anchor dash fastners, all complete as per

manufacturer's specification and direction of Engineer-in-

THIRUVANANTHAPURAM DIVISION-GATI SHAKTI/SOUTHERN RLY

Providing and fixing factory made uPVC white colour

casement/casement cum fixed glazed windows comprising

of uPVC multi-chambered frame, sash and mullion (where

ever required) extruded profiles duly reinforced with 1.60

+/- 0.2 mm thick galvanized mild steel section made from

roll forming process of required length (shape & size

according to uPVC profile), uPVC extruded glazing beads of

appropriate dimension, EPDM gasket, stainless steel (SS

304 grade) friction hinges, zinc alloy (white powder coated)

casement handles, G.I fasteners 100 x 8 mm size for fixing

frame to finished wall, plastic packers, plastic caps and

9.147A necessary stainless steel screws etc. Profile of frame &

sash shall be mitred cut and fusion welded at all corners,

mullion (if required) shall be also fusion welded including

drilling of holes for fixing hardware's and drainage of water

etc. After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon

sealant over backer rod of required size and of approved

quality, all complete as per approved drawing & direction

of Engineer-in-Charge. (Single / double glass panes and

silicon sealant shall be paid separately). Variation in profile

dimension in higher side shall be accepted but no extra

payment on this account shall be made.

9.147A.1 Casement window single panel with S.S. friction hinges Sqm 15.75 10443.75 164489.06

(300 x 19 x 1.9 mm), made of (small series) frame 47 x 50

21 mm & sash 47 x 68 mm both having wall thickness of 1.9

+/- 0.2 mm and single glass pane glazing bead of

appropriate dimension. (Area of window upto 0.75 sqm.)

Providing and fixing factory made uPVC white colour fixed

glazed windows/ventilators comprising of uPVC multi-

chambered frame and mullion (where ever required)

extruded profiles duly reinforced with 1.60 +/- 0.2 mm

thick galvanized mild steel section made from roll forming

process of required length (shape & size according to uPVC

profile), , uPVC extruded glazing beads of appropriate

dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for

fixing frame to finished wall, plastic packers, plastic caps

and necessary stainless steel screws etc. Profile of frame

9.147B shall be mitred cut and fusion welded at all corners,

mullion (if required) shall be also fusion welded including

drilling of holes for fixing hardware's and drainage of water

etc. After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon

sealant over backer rod of required size and of approved

quality, all complete as per approved drawing & direction

of Engineer-in-Charge. (Single / double glass panes and

silicon sealant shall be paid separately). Variation in profile

dimension in higher side shall be accepted but no extra

payment on this account shall be made.

9.147B.1 Fixed window / ventilator made of (small series) frame 47 x Sqm 2.16 7249.9 15659.78

50 mm & mullion 47 x 68 mm both having wall thickness of

1.9 +/- 0.2 mm and single glazing bead of appropriate

dimension. (Area upto 0.75 sqm.)

11.0 FLOORING

11.16S TILE FLOORING

Chequerred precast cement concrete tiles 22 mm thick in

footpath & courtyard, jointed with neat cement slurry

11.20 mixed with pigment to match the shade of tiles, including

rubbing and cleaning etc. complete, on 20 mm thick bed of

cement mortar 1:4 (1 cement: 4 coarse sand).

23 11.20.3 Dark shade pigment using ordinary cement Sqm 2520 983.95 2479554

11.41S VITRIFIED FLOOR TILES

Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade,

laid on 20 mm thick cement mortar 1:4 (1 cement: 4

coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and

matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing

the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

THIRUVANANTHAPURAM DIVISION-GATI SHAKTI/SOUTHERN RLY

Providing and laying machine cut, mirror polished, Italian

Marble stone flooring laid in required pattern in linear

portion of the building all complete as per architectural

drawings, with 18 mm thick stone slab laid over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with white cement slurry @

4.4 kg/sqm including pointing with white cement slurry

admixed with pigment to match the marble shade

including rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso Sqm 40 6095.5 243820

verona, Fire Red or Dark Emperadore etc.

Providing and laying machine cut, mirror polished Marble

stone flooring, in required design (Simple geometrical,

abstract etc.) and in patterns in combination with Italian

marble stones of different colours, shades and finished

surface texture etc., in linear portions of the building, all

complete as per the architectural drawings, with 18 mm

11.52 thick stone slab laid over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and

jointed with white cement slurry @ 4.4 kg/sqm, including

pointing with white cement slurry admixed with pigment to

match the marble shade, including rubbing, curing and

polishing etc. all complete as specified and as directed by

the Engineer-in-Charge.

11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso Sqm 25 6389.4 159735

verona, Fire Red or Dark Emperadore etc.

Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20

mm (average) thick base of cement mortar 1:4 (1 cement :

4 coarse sand) laid and jointed with cement slurry and

pointing with white cement slurry admixed with pigment of

matching shade including rubbing , curing and polishing

etc. all complete as specified and as directed by the

Engineer-in-Charge.

11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Sqm 10 3908.8 39088

Red or equivalent

12.0 ROOFING

Providing, fixing and embedding sand cast iron accessories

for rain water pipes in the masonry surrounded with 12 mm

thick cement mortar of the same mix, as that of masonry

(lead caulking will be paid for separately):

Providing and fixing on wall face unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10

mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC

moulded fittings/ accessories for unplasticised Rigid PVC

12.42 rain water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10

mm gap for thermal expansion.

12.42.1 Coupler

12.42.5 Bend 87.5 degrees

12.42.6 Shoe (Plain)

Providing and fixing unplasticised -PVC pipe clips of

approved design to unplasticised - PVC rain water pipes by

means of 50x50x50 mm hard wood plugs, screwed with

M.S. screws of required length, including cutting brick work

and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)

and making good the wall etc. complete.

12.44 Providing and fixing to the inlet mouth of rain water pipe Each 10 47.9 479

33 cast iron grating 15 cm diameter and weighing not less

than 440 grams.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

THIRUVANANTHAPURAM DIVISION-GATI SHAKTI/SOUTHERN RLY

13.33S POINTING ON STONE WORK

Pointing on stone work with cement mortar 1:3 (1 cement :

13.44S EXTERIOR FINISHING

Finishing walls with Acrylic Smooth exterior paint of

required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm Sqm 3388.4 166.85 565354.54

36 over and including priming coat of exterior primer applied

16.0 ROAD WORK

16.49S MISCELLANEOUS

16.75 Providing and laying C.C. pavement of mix M-25 with ready cum 528 8277.55 4370546.4

mixed concrete from batching plant. The ready mixed

concrete shall be laid and finished with screed board

vibrator , vacuum dewatering process and finally finished

by floating, brooming with wire brush etc. complete as per

specifications and directions of Engineer-in-charge. (The

panel shuttering work shall be paid for separately). (Note:-

Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/

recoverable separately).

16.79 Providing, laying, spreading and compacting graded stone cum 1080 2803.65 3027942

aggregate (size range 53 mm to 0.075 mm ) to wet mix

macadam (WMM) specification including premixing the

material with water at OMC in for all leads & lifts, laying in

38 uniform layers with mechanical paverfinisher in sub- base /

base course on well prepared surface and compacting with

vibratory roller of 8 to 10 tonne capacity to achievethe

desired density, complete as per specifications and

directions of Engineer-in-Charge.

17.0 SANITARY INSTALLATIONS

Providing and fixing white vitreous china flat back half stall

urinal of size 580x380x350 mm with white PVC automatic

flushing cistern, with fittings, standard size C.P. brass flush

pipe, spreaders with unions and clamps (all in C.P. brass)

with waste fitting as per IS : 2556, C.I. trap with outlet

grating and other couplings in C.P. brass, including

painting of fittings and cutting and making good the walls

and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing Each 2 10128.3 20256.6

17.31 Providing and fixing 600x450 mm beveled edge mirror of Each 1 1411.15 1411.15

superior glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets

17.73 fixed to wooden cleats with CP brass screws with concealed

fittings arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width Each 4 600.35 2401.4

41 78 mm and effective height of 88 mm, weighing not less

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes

18.8 jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good

the same including testing of joints complete as per

direction of Engineer in Charge, Concealed work, including

cutting chases and making good the wall etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings This

18.9 includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge.-External

18.15S BRASS FITTINGS

THIRUVANANTHAPURAM DIVISION-GATI SHAKTI/SOUTHERN RLY

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

Providing and fixing uplasticised PVC connection pipe with

18.21.1 30 cm length

18.31S C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES

18.48 Providing and placing on terrace (at all floor levels) Litre 10000 9.7 97000

polyethylene water storage tank, IS : 12701 marked, with

47 cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but

without fittings and the base support for tank.

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass stop cock (concealed) of

18.52 standard design and of approved make conforming to

Providing and fixing PTMT grating of approved quality and

18.58.1 Circular type

18.59S AIR VALVE & WATER METER (BULK TYPE)

18.65 Providing and fixing PTMT soap Dish Holder having length Each 4 96.75 387

of 138mm, breadth 102mm, height of 75mm with

concealed fitting arrangements, weighing not less than 106

20.0 PILE WORK

Boring with hydraulic piling rigs with power units, providing

and installing cast in situ single under reamed piles of

specified diameter and length below pile cap in M-25

cement concrete, to carry a safe working load not less than

20.3 specified, excluding the cost of steel reinforcement but

including the cost of boring with bentonite solution and the

length of the pile to be embedded in pile cap etc. all

complete. (Length of pile for payment shall be measured

upto to the bottom of pile cap) :

Schedule A1-List of items of works covered by the CPWD Delhi Schedule of rates 2021 (DSR 2021 Vol-I & Vol-II) -

Supply of reinforcement steel

Item- 1 SW - I: New halt station near Cochin Airport

S No. Item No Description of Item Unit Qty Rate Amount

5.0 REINFORCED CEMENT CONCRETE

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including straightening,

5.22 cutting, bending, placing in position and binding all

complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or Kg 6000 89.65 537900

Steel reinforcement for R.C.C. work including straightening,

5.22A cutting, bending, placing in position and binding all

complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or Kg 64500 89.65 5782425