SPL REP TO OVERHEAD TANK AND CERTAIN BLDGS AT BINNAGURI MIL STN UNDER GE SOUTH BINNAGURI

Amount

Schedule 'A'

Demolition of brick work or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing diressed stone work and precast concrete block complete all as specified and directed.

Taking down cement plaster of any description on brick/stone/concrete surfaces including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:6), finished fair & even without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick with CM (1:3) on or concrete surfaces finished fair & even without using extra cement as in ceiling complete all as specified and directed.

Rendering 15mm thick with CM (1:4) on brick work or concrete surfaces finished fair even without using extra cement complete all as specified and directed.

Roughening of unsound/weak concrete matarials of slab supported on wall, beams and columns in floors, roofs, landings baconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L design mix M-25 in slabs supported on walls, beams and columns in floor roofs, landings balconies, canopies, deck, slab and in shelves and the like complete all as specified and directed.

M&L for prepare the wall & floor surface of overhead tank and applying water proofing materials brush bond RFX as per manufacturer's instruction complete all as specified and directed. Make : FOSRAC/CICO/DE rust Chemical Corporation.

Preparation of new surfaces of walls and applying two coats of cement base paint of priming paintcomplete all as specified and directed.

Preparation of old surfaces of walls and applying one coat of cement base paint upto the height of 27 mtrs for over head tank complete all as specified and directed.

M&L for one coat of synthetic enamel paint including preparation on old steel surfaces of any description over 10cm width or girth complete all as specified and directed.

M&L preparing old painted wooden surface of any decription not otherwise described for over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F integral LED aviation light comprising of aluminium housing with polycarbonate enclosure for over head tank as directed and instructed. Make : Bajaj Cat No BGGAV 302 LED or equivalent.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing the rubbish off the premises complete all as specified and directed.

M&L for pre-polished pavement coloured tiles glossy finish of size not less than 303x303x22mm thick over & including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) or any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC in 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel complete all as specified and directed.

Extra for forming fair finished drain 30cm inner girth complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over of under 30cm complete all as specified and directed.

Demolition of reinforced concrete as in cover slabs of drain complete all as specified and directed.

S&F for mild steel TMT bars, 8mm dia, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slabs of drains set in CM (1:6) including necessary form work complete all as specified and directed.

S&F in repair framed work such as grills, grating etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, walk way raming frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation on new steel surfaces of any description over 10cm wideth or girth complete all as specified and directed.

Dismantling post or strut any section including taking out embedded portion and making good disturbed ground post embedded natural ground complete all as specified and directed.

All as per item No 27 here-in-before but post embedded in concrete brick and masonry ground etc complete all as specified and directed.

S&F in repair galvanised 2 strand barbed wire 2.25mm dia barbed with 2mm barbed at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or laying at corssing with and provision of galvanised milst steel wire staples or steel pins etc complete all as specified and directed. (NOTE : Each line of wire to be measured).

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filing in and ramming each or broken rubble mixed with earth around in layers not exceeding 25cm and removal excess soild to at a distance 50m and making good surface (shoft or loose soil) complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations filling and mass concrete including demolition old one complete all as specified and directed.

M&L for RCC design mix, M-25 as in columns, pillars, piers, post and struts complete all as specified and directed.

M&L for cement concrete in foundation, filling and mass concrete type C-2 1:3:6 using 40mm graded aggregate as in PCC bends in ground level to holt the bottom of post etc complete all as specified and directed.

S&F TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending epirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0,9mm dia or securing with clips complete all as specified and directed.

All as per item No 34 here-in-before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

All as per item No 35 here-in-before but 6mm dia round bar as in nibs complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns raft and reft beams sides and soffit of foundation and plinth beam and similar work similar or batte for rough finished surfaces of concrete in flat complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, pillars, columns and starchions finished rough square rectangular section complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer completed all as specified and directed.

M&L in repair for flat iron in fencing including cutting tops to shape as directed drilling holes notening for wire etc fillets iron flats including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165 completed all as specified and directed.

S&F for galvanised iron sheet 1mm thick fixed with galvanised screws complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2, using 40mm graded stone aggregate as in path/plinth protection/hardstanding finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints through out the thickness of plinth protection completed all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4 type C-2, using 40mm graded stone aggregate as in path/plinth protection/hardstanding finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints through out the thickness of plinth protection complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for completed all as specified and directed.

S&F for mild steel section in Roof trusses (framed), trussed, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tree, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 Gde-165 completed all as specified and directed.

Dismantling plain/corrugated steel sheeting any gauges thickness, including Nainital or similar pattern as in eves board etc completed all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based steel corrugated sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for rendering 20 mm thick in two layer of 10mm thick each layer in CM 1:4 and the top layer shall be mixed with WPC as per manufacturer's instructions on brick work or concrete surfaces on external of wall and finished even and fair complete all as per specified and directed. (WPC shall be measured and paid separately)

Supply only integral water proofing compound. IS : 2645-1975 Make : CICO NO-1/SIKA/ ACCOPROOF.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer completed all as specified and directed.

M&L preparing steel new surfaces and applying two coats of synthetic enamel paint over a coat of red oxide/zince chrome primer over 10cm in width or girth complete all as specified and directed.

M&L preparing steel new surfaces and applying two coats of synthetic enamel paint over a coat of red oxide/zince chrome primer over 10cm in width or girth complete all as specified and directed.

M&L for 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and directed.

S&F of coloured Non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tiles complete all as specified and directed.

M&L for glazed ceramic colour tiles 450x250x7mm thick as on vertical surface of wall such as skirting, dado, riser etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved by Engr-In-Charge complete all as specified and directed.

Taking down carefully old unsv aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, socket outlet, bulk head fittings, tube light fittings etc and making good the disturbed surface complete all as specified and directed.

M&L for concealed Point wiring controlled by one switch with 1.50 Sqmm (nominal area) FRLS, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable and FRLS, ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, drawn through in and including rigid PVC conduit (Medium Grade) of suitable size, with all fittings, ISI marked and accessories, the pipe shall be fixed with clamping and shadle including provision of mild steel terminal boxes/Sunken boxes of suitable size made with 1.6 mm thick mild steel sheet recessed in wall with a coat of black bituminus paint and providing of with 3mm thick bakelite/PVC sheet ISI marked top cover , suitable for fixing of switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for one light / fan point controlled by one switch including cutting/chasing wall complete all as specified and directed for the following :- One light point controlled by one way switch 5/6 amps.

All as per Item No 58 here- in-before but for One ceiling fan/Exhaust fan point 5/6 amps complete all as specified and as directed.

All as per Item No 58 here- in-before but for One socket outlet 5/6 amps point on the independent board complete all as specified and as directed.

All as per Item No 58 here- in-before but for One socket outlet 5/6 amps point on the same board complete all as specified and as directed.

All as per Item No 58 here- in-before but wiring with 2.5 Sqmm single core copper conductor for one socket outlet 15/16 Amps point on the independent board complete all as specified and as directed.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F switch piano flush type 15 Amps single pole one way complete all as specified and directed.

S&F socket 2 in 1, 5 Pin, 5 and 15 amp, white ivory finish flash type complete all as specified and directed.

S&F socket 2 in 1, 3 pin and 15 Amp, white ivory finish flash type complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F lamp holder, insulated body, with back plate suitable for betten/angle fittings complete all as specified and directed.

S&F deluxe fan electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

S&F wall mounted slim LED tube light batten 20 Watt with extruded aluminium housing with integrated LED driver complete all as specified and directed.

M&L for street light bracket made out of GI pipe light grade 40mm dia 1.5 Mtr length bent to shape and reduced to required size at top by cutting, welding and well finishing including MS clamp of flat iron of size 40 x 6mm suitable length 2 Nos complete with drilling, hole, fixing to wall with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.

S&F LED security light fitting 45 watt luminaire made out of pressure dia cast aluminium housing, heat resistent toughened glass IP66 protection complete all as specified and directed.

Taking down old unsv existing sub main wiring with copper/aluminium conductor cable upto and including 6 Sqmm single core including earth wire from existing conduit or wooden battens including taking out unsv wooden guttles etc matching with the existing surfaces complete all as specified and directed.

M&L for sub main wiring concealed type with 2 single core cable PVC insulated cable with 6.00 sqmm (Nominal area) multistranded copper conductor FRLS cable 1100 volts grade including earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25mm dia medium grade size including making good the disturbed surfaces complete all as specified and directed. NOTE : (i) Two runs of submain wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length.

Taking down old MCB DBs with MCBs/Main switches/wooden boards etc complete all as specified and directed.

S&F sheet metal enclosure for 8 way distribution boards (DB's) double door, single pole & neutral with 200 Amps rated bus bar, IP-43 protection suitable for fixing MCBs/Isolators complete all as specified and directed.

S&F MCB, Single pole & neutral 40 Amps, 240 Volts 'C' curve, 10 KA complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amps, 240 volts, 'C' curve, 10 KA complete all as specified and directed.

Material and labour for Earthing with Galvanised Steel Earth Plate Electrode 600X600X6.0mm thick, buried directly in Ground (Earth Pit not less than 2.25 METRE deep below Ground Level) with Top Edge of the Plate not less than 1.50 METRE below Normal Ground Level connected to GI strip 25x4mm Earthing Lead up to 7.5 METRE from Testing Point by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Iron or Steel, Earth Plate Electrode surrounded by a packed thickness of Char Coal mixed with Common Salt in alternate layers of not exc.150mm thick, strip protected with and including GI Pipe 40mm Bore (dia) ‘Light Grade’ for mechanical protection including PCC Pit in Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) and Pre-Cast RCC Cover of Size 450X450X50mm in RCC (1:2:4) Type B1 (20mm Graded Stone Aggregate) with Mild Steel Round Bar 10mm Handle of suitable Size, Reinforced with and including 8.0mm dia TMT Bars @ 100mm Centre to Centre both ways GI Wire Mesh, Funnel, GI Watering Pipe 20mm Bore (dia) Medium Grade, necessary Excavation in Soft/Loose Soil, Returning Filling in and Removal of Surplus Spoil up to a distance of 50.00 METRE and complete all as shown in Figure 15A of IS 3043 :1987, and Testing on, complete all as specified and directed by Engineer-in-Charge.

M/S. UNITED CONSTRUCTION CO

M/s PATEL ENGINEERING

ANIL ENGINEERING CO

M/S JAGDISH PRASAD AGARWALA

S.N. GHOSH AND CO.

SHRI K.C BAUL