Replacement of different materials for LT power distribution panels and various lighting works at various sites under AE(Elect)KBN,MTNL,ND

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections,necessary modification in existing busbars for accomodating MCCB etc. as required.a). 250 Amps 3 pole MCCB with 25 KA Breaking Capacity ( Make : L&T)

(b). 160 Amp,36 KA 3 Pole MCCB (Make- L&T)

c) 100 Amp 3pole25 KA Amp TP MCCB ( L&T)

d) Pilot Lamp of 22.5 mm LED type(R Y B)

(e). Digital 96mmX96mm voltmeter (0-500) volts

(f). 96mmX96mm ammeter (0-300 )amps

(g). 300/5 Amps C.T for sensing

Supplying and laying of following sizes of PVC insulated unarmored flexible copper cable and laying on wall/ existing panel with fixing accessories etc complete as reqd ( Make :-M/s Havells/Polycab )a) 50 sqmm copper

Providing and fixing of M.S structure fabricated with 40mmx40mm x5 mm thick M.Sangle iron I/C cutting , welding, grinding , grouting and fixing in the ground/ shade etc complete as reqd This frame work is to be fixed around the various electrical & mechanical equipments & appliances which should have the door on one side with locking arrangement & all frame work is to be painted with two coats of Red Oxide, Primer and two coats of synthetic enamel paint of approved colour& quality etc, as reqd

Supplying and fabrication of aluminum colour coated metro sheet with thickness not more 0.5 mm i/c cutting bending the same and fixing hole fastner , nut bolts in existing MS structure etc. complete as reqd as per instruction of site incharge .

Providing CC foundation of above LT panel on the roof with cement concrete of ratio 1;2;4 ( One cement , 2 coarse sandand 4 stone agg. and providing and grouting 4 nos 4 soot nut bolt and washer for fixing of panel in foundation etc complete as reqd

Dismentling of old damaged existing LT panel from top of building roof andShifting in G/f as per instruction of site incharge I/c disconnect the connection and making provision of temporarySupply for electrical equipments etc complete as reqd

Dismentling and shifting of existing LT panel from Ground floor to terrace of building roof as per instruction of site incharge I/c disconnect the connection s etc complete as reqd

Supplying and making end termination with brass compressiong land and aluminium lugs for following size of PVC insulatedand PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.50x95 sqmm

b) 3.50x50 sqmm

Supplying & fixing the recessed mounting Ultra modern recess luminaire suitable for armstrong/grid/POP/cable trays ceiling complete with separate electronic driver & high brightness SMD LEDs with 30 W ( 1 ft X 4 ft ) diffused type lighting system on the existing false ceiling with hanging arrangement i.e direct/by using chains ,fastner as per site requirement and minor adjustment, connections with proper connector from both sides in existing ceiling to accommodate the fitting as per the site requirement etc. complete as reqd.(Make: Havells /philips/Syska/Crompton/orient/Bajaj)

SITC of 25 to 30 WLED street light luminaires having Aluminium die cast housing and tempered flat glass optical cover on existing pole/ bracket suitable for operation on 230V, 50Hz, single phase AC supply i/c all type of modification in existing pole/bracket complete as reqd. (make: Havells /philips/Syska/Crompton/orient/Bajaj)

S.K.Electricals