Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 LAccepted-AOC | L1 | Accepted-AOC Agreed PAC | |
| 2 | L2₹7.4 L+₹67,634.22 (10.0%)Rejected-Finance KOLATH NILAPOLA P O | KERALA | L2 | Rejected-Finance High Quoted Bid |
| Sl No | Description | Qty | Unit | JACOB GEORGE L2 | A.R. JAIMON L1 |
|---|---|---|---|---|---|
| 1.00Maintenace work | |||||
| 1.00 | 15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge | 48.4 | sqm | 65 ₹3,146 | 63.29 ₹3,063.24 Lowest |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 260.73 | kg | 640 ₹1,66,867.2 | 634.42 ₹1,65,412.33 Lowest |
| 1.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 49.14 | kg | 775 ₹38,083.5 | 768.44 ₹37,761.14 Lowest |
| 1.00 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 17.37 | sqm | 1,850 ₹32,134.5 | 1,803.55 ₹31,327.66 Lowest |
| 1.00 | OD254797/2025-2026:(Modified from DAR.21.2.2)-Providing and fixing 3mm thick ACP sheet of in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge. | 42.87 | sqm | 1,600 ₹68,592 | 1,540.8 ₹66,054.1 Lowest |
| 1.01 | 21.4.1:Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness | 2 | each | 3,340 ₹6,680 | 3,331.9 ₹6,663.8 Lowest |
| 1.01 | 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap | 2 | each | 2,650 ₹5,300 | 2,603.83 ₹5,207.66 Lowest |
| 1.01 | 17.10.2.1:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board610x510 mm bowl depth 200 mm | 1 | each | 5,850 ₹5,850 | 5,815.76 ₹5,815.76 Lowest |
| 1.01 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 2.9 | cum | 410 ₹1,186.95 | 390.29 ₹1,129.89 Lowest |
Tender Value
₹6.8 L
EMD Value
₹16,901
Closing Date
25 Oct 2025, 6:00 pmClosed
Assistant Engineer
O/o Assistant Executive Engineer, Aryad Block Panchayat, Kalavoor
ARYAD BP_135_26_ Partition work in OP Building in CHC MUHAMMA Maintenance work
2025_LSGD_811642_1
ARYAD BP_135_26_ Partition work in OP Building in CHC MUHAMMA Maintenance work
Open Tender
Civil Works - Buildings
Item Rate
90 days
MUHAMMA GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,495
₹16,901
17 Nov 2025
17 Oct 2025
27 Oct 2025
17 Oct 2025
25 Oct 2025
17 Oct 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1355424.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.03 MB
Tendernotice_2.pdf
PDF • 0.13 MB
Tendernotice_3.pdf
PDF • 0.02 MB
Tendernotice_4.pdf
PDF • 0.12 MB
Tendernotice_5.pdf
PDF • 0.02 MB
Tendernotice_6.pdf
PDF • 0.05 MB
BOQ_1355424.xls
BOQ • 0.32 MB
SBD.pdf
Tender Documents • 2.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .