Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹20.3 L+₹1.9 L (10.6%)Rejected-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹20.8 L+₹2.4 L (13.4%)Rejected-AOC 38 41 28 104 AREA INDUSTRIAL ESTATE VISAKHAPATNAM 530007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹21.2 L+₹2.8 L (15.5%)Rejected-AOC | L4 | Rejected-AOC Not being L1 | |
| 5 | L5₹22.7 L+₹4.4 L (23.9%)Rejected-AOC | L5 | Rejected-AOC Not being L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
7 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Naval Depot
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
COMPREHENSIVE MAINTENANCE AND REPAIRS TO NAUSHIKTI VIHAR POCKET A UNDER AGE BR III OF GE ND VISAKHAPATNAM
2022_MES_568459_1
8236GEND
Open Tender
Civil Works
Item Rate
240 days
Visakhapatnam
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE ND VIZAG
₹70,000
3 Mar 2023
10 Dec 2022
12 Jan 2023
10 Dec 2022
7 Jan 2023
24 Dec 2022
Amount
The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:-The work is to be executed in multistoried buildings Tenderers/bidders are advised to vist the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.
S&F Non-skid glazed ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 including dismantling of old tiles and removing them to a distance upto 500 m complete all as specified and as directed.
S&F vitrified ceramic tiles 10 mm thick (square or rectangular) polished area of each tile exceeding 0.36 sqm but not exc. 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 including dismantling of old tiles and removing them to a distance upto 500 m complete all as specified and as directed
Preparing old surfaces of wall by using vaccume based hand held or long handle sander machine and applying one coat of oil bound distemper by using Auto roller or Airless sprayer machine complete all as specified and directed .
Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including screed bed 10 mm thick in CM 1:4 including dismantling of old tiles and removing them to a distance upto 500 m complete all as specified and directed.
M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) by using auto roller or airless sprayer machine complete all as specified and as directed.
M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and as directed.
S&F in repairs, Aluminium anodised Window frame of size 101.60x44.75x1.75mm thick (section 2425 of jindal or equivalent) shutter style of 85x44.45x1.56 (section 4590 of jindal or equivalent) bottom rail will be of size 114.30x44.45x1.55 (section 4591 of jindal or equivalent) including aluminium beading, rubber/neoprene gasket, mortice lock, Aluminium round handles of dia 150mm on both sides, 200mm long tower bolts including S/F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box and main body with stainless steel cover and governing pivot made up of brass, other parts made up of mild steel heavy duty (of approved make) and including 5.5mm thick tinted glass at both pane including fittings and fixture complete all as specified and as directed
Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) including removing the demolished material to a distance upto 500 m and depositing where directed ,complete all as specified and directed.
S & F 4 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane including hacking out old broken glass including removing the demolished material to a distance upto 500 m and depositing where directed complete all as specified and as directed.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finishing the surface even and smooth without using extra cement including mixing of water proofing compound @3% of weight of cwment wherever required for floors and sides of wall in sunken floors complete all as specified and directed NOTE: Water proofing compound shalll be measured and paid separately
Supply only integral water proofing compound ISI marked of approved make. complete all as specified and directed.
Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (Without taking off shutters from the frames) complete all as specified and as directed.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.
S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete including Preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying Two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer by using auto roller or airless sprayer machine complete all as specified and as directed.
S&F Factory Made 35mm thick, 2nd class hard wood, plain, framed paneled shutters (any number of panels) with panels of timber flat on both side (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers etc including Preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying Two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer by using auto roller or airless sprayer machinecomplete all as specified and directed.
S & F Factory made 35mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc size of members as specified in SSR Part I section 8 clause 8.24 (b) including Preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying Two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer by using auto roller or airless sprayer machine complete all as specified and directed.
S&F Factory Made 2nd class hard wood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc divided into square with rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc (size of members of shutters as specified in SSR Par –I section 8 Clause 8:24 (b) Preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying Two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer by using auto roller or airless sprayer machine complete all as specified and directed.
Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in openingcomplete all as specified and directed.
150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
100 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 100mm long mild steel butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and directed
S&F 75 mm long mild steel butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and directed
150 mm long Extruded aluminium alloy handles, fabricated type , anodised complete all as specified and directed
100 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed
M&L for providing and injecting chemical emulsion for post constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution ] @ 0.5 litre per hole by drilling 6mm dia holes area downward angle of 45 degrees at 150mm centre to centre and sealing the same complete all as specified and as directed.
M & L for plain cement concrete Type E2 1:5:10 (using 40mm graded crushed granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors as per manufacturers instructions complete all as specified and directed.
GS ENGINEERS
M/S Jayalakshmi Constructions
ESWAR ENTERPRISES
varaha venkata sai constructions
L DURGA GANESH
K NAGARAJU
M/s KAMADHENU ENGINEERING CONSTRUCTIONS
DHEERU BUILDERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .