Providing, supplying, Lowering ,laying and Jointing 140 mm PVC 6 kg/cm2 pipeline from Triveni river to Rupamora Village under DMF programme.Tal-Bhanvad, Dist- Devbhumi Dwarka.

Name of Work: Providing, supplying, Lowering ,laying and Jointing 140 mm PVC 6 kg/cm2 pipeline from Triveni river to Rupamora Village under

DMF programme, Year - 2026-27.

QTY UNIT DISCRIPTION OF ITEM RATE PER AMOUNT

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS specification no.4985/1988

including all local and central taxes, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores and including cost of

jointing material etc complete.

1600.00 Rmt 140 mm dia PVC 6 Kg/cm2 326.00 Rmt

1.00 No. PVC Pipe Price Variation Provision (15% of Item no 1 ) 78240.00 No.

Excavation for pipeline trenches for water supply, sewerage line,

manhole, etc. All with shoring if required as per required gradient

and line including safety provisions using site rails and stacking

excavated stuff including up to all required lead cleaning the site

etc. complete for all lifts and strata as specified.

480.00 Cum A. in all sorts of soil and soft murrum 89.00 Cum

288.00 Cum B. in hard murrum,boulders incl. Macadam road 135.00 Cum

96.00 Cum C. in soft rock and/or masonary in C. M./L. M. 163.00 Cum

96.00 Cum D. in hard rock and/or in c.c. 1:2:4 or RCC with blasting and 372.00 Cum

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and

specials of following class and diameters including cost of

conveyance from stores to site of works including cost of labour,

material, cement sovent,giving satisfactory hydraulic testing as

1600.00 Rmt 140 mm dia PVC 6 Kg/cm2 23.00 Rmt

Refilling the pipeline trenches incl. Ramming, watering,

consolidation, disposal of surplus stuff as directed within a radius

935.38 Cum of 3.00 Kmts 22.00 Cm

Providing and supplying C. I. Air valves of approved make &

quality of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores,

stacking etc. complete.

2.00 50mm Dia DS2 type Airvalve 2496.00

Lowering, laying and jointing in position following C. I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, including nut bolts

2.00 and giving satisfactory hydraulic testing, etc. complete. 379.00

Erection of airvalve riser by installing new M.S pipe of 6mm thick

and 3.2mt length with necessary fittings such as flange of

size,nut bolts and embeded the pipe in R CC M;15 with offset of

10 cm around pipe with necessary steel etc complete. Dia of Air

Supply of Three Phase Sub Mono Pump Set. SM-2.9(440 LPM x

1 Set 52 Mtr Head x 15 HP) 25200 Set

(Mech SOR 2022-23, Pg.No.35, Sr.No- 5(5)

Supply of 63 mm Dia. H.D.P.E. Pipe PN-10

100 Mtr. 130 Mtr.

(Mech SOR 2022-23, Pg.No.22, Item.No- 15(iv))

Supply of 1 x 3 x 2.5 Sq. Mm Flat PVC Cable

100 Mtr. 58 Mtr.

(Mech SOR 2022-23, Pg.No.34, Sr.No- 3.1(b))

Supply of 11-15 HP SD type Control panel board

(Mech SOR 2022-23, Pg.No.33, Sr.No- 2.1.(e)

Installation, Testing & Commissioning of Submonopump set

inlcuding lowering laying of pipeline, fixing of valve, penal board,

& incl. testing etc. compl. With fixing of NRV on delivery

side(rising main to over head tank) of tubewell/sump side with

req. accessories. Various HP

(As Per Mech SOR 2022-23, Item No.51(b), Page.No- 93)

E:\1.PB BHAVESH\Final DTPs\8. DMF Rupamora\DTPs\Rupamora DMF Pipeline & Pumping Machinery

Providing dust and vermin proof Mild Steel Cabin having two

compartment one for panel board and other for GEB meter and

fuse unit with required locking arrangement , minimum degree of

protection IP 52 as per IS 2147 fabricated from CRCA sheer

steel minimum thickness for base frame/channel/glanq plates for

3 mm for load bearing members ,1.6 mm for ineternal members

including cutting,bending,drilling,welding, riveting with ineternal

1 No. 20323.8 Unit

partitions.The sheet steel enclosure shall be powder coated as

per applicable standard with shade as required with finish

thickness of paint film not less than

GWSSB Mech. SOR 22-23 Sec-B P.No.22 ,It.No.12.2

I / We am / are Willing to carry out the work at % Above / Below (should

be written in words and figure ) i.e .

Above / Below estimated rate sanctioned above

Sign Of Contractor Deputy Executive Engineer

P.H.S.Sub Division

E:\1.PB BHAVESH\Final DTPs\8. DMF Rupamora\DTPs\Rupamora DMF Pipeline & Pumping Machinery