Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-AOC H 10 KARNI NAGAR NEW NAGAUR ROAD NEAR MANDORE POLICE STATION 8TH MILL MANDORE JODHPUR 342304 | JODHPUR | JODHPUR | RAJASTHAN | 342304 | L1 | Accepted-AOC Accepted being lowest bidder | |
| 2 | L2₹13.9 L+₹1,561.50 (0.11%)Rejected-AOC 61 ABHAY GARH SCHEME AIR FORCE JODHPUR 342001 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-AOC Rejected being higher bidder | |
| 3 | L3₹15.2 L+₹1.3 L (9.31%)Rejected-AOC 10 ABHAY GARH SCHEME CENTRAL SCHOOL AIR FORCE JODHPUR 342001 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-AOC Rejected being higher bidder | |
| 4 | L4₹15.5 L+₹1.6 L (11.5%)Rejected-AOC 06 KHASRA NUMBER 56 KIRAN NAGAR BASNI JODHPUR JODHPUR RAJASTHAN 342001 UDYAM RJ 22 0002214 | JODHPUR | RAJASTHAN | 342001 | L4 | Rejected-AOC Rejected being higher bidder |
Tender Value
₹18.6 L
EMD Value
₹37,200
Closing Date
3 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jodhpur
GE (AF) Jodhpur
PROVN OF COMMERCIAL POWER SUPPLY TO CERTAIN EQUIPMENT IN TECH AREA AT AF STN JODHPUR
2023_MES_607748_1
8585/E8
Open Tender
Electrical and Maintenance Works
Item Rate
60 days
GE (AF) Jodhpur
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) Jodhpur
₹37,200
Yes
29 Aug 2023
3 Jul 2023
5 Aug 2023
3 Jul 2023
3 Aug 2023
21 Jul 2023
Amount
M&L for Voltage stabilizer for automatic operation ,three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 V with accuracy +2.5% and speed of correction 8 Volt per second and of capacity 75 KVA complete all as specified and as directed.
Supply, install, testing and commissioning of out door type LT Panel Board made out of 3.15 mm thick CRCA Sheet( CPRI Approved) suitable for 3 phase 4 wire system, 415 volts with 40 x 40 x 5 mm size angle iron bottom frame, front and back operated doors,dust and vermin proof factory made with powder coated painting including connection of the incoming and outgoing cable with the MCCB with new lugs and cable gland and provisioning the cable entry system for all cable and necessary PCC foundation in 1:4:8 type D-2 using 40 mm graded stone aggregate complete all as specified and directed consisting of following components :- (a) Bus bar chamber with aluminium bus bar of 200 amps capacity for 3 phases and 150 amps capacity for neutral (b) MCCB Thermal magnectic release type with Rotary type handle, 4 pole 415 Volts 100 amps, 25 KA - 01 Nos (For Incomer) (c) MCCB Thermal magnectic release type with Rotary type handle, 4 pole 415 Volts 80 amps, 16 KA - 01 Nos (d) MCB SPN, 2 pole 230 Volts, 40 amps, 16 KA - 01 Nos (AC & Lighting load) (e) Digital type voltmeter 0-500 volts - 01 No (f) Digital type ampere meter up to 200 amps including suitable size CT set of three (g) Indication lamps (R Y B ) set of 03 Nos - 01 Set
Supply, Laying, jointing and testing of XLPE LT Cable PVC insulated, armoured, heavy duty electric cable with aluminum conductor 1100 volts grade of size 95 Sqmm 4 core laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed.
Supply, Laying, jointing and testing of XLPE LT Cable PVC insulated, armoured, heavy duty electric cable with aluminum conductor 1100 volts grade of size 70 Sqmm 4 core laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed.
Supply, Laying, jointing and testing of XLPE LT Cable PVC insulated, armoured, heavy duty electric cable with aluminum conductor 1100 volts grade of size 10 Sqmm 2 core laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed.
Supply and fixingof PVC insulated and sheathed round wire flexible multicore annealed copper conductor 1100 volts grade of size 16 Sqmm 5 core, fixed to walls on saddles etc. complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 m deep and not exceeding 1.5 mtr wide and getting out including forming bottom surface to required levels/gradients/slopes for foundations/laying of cable complete all as specified and directed. Note :- Excavation shall be carried out manually all as directed.
Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete all as specified and directed.
Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed.
Material & labour for sand cushioning for XLPE cable with tibba sand (one layer of 80 mm thickness before laying of cable and other layer of 150 mm thickness after laying of cable) & punning down to 180 mm to provide a required cover complete all as specified and directed by the Engineer-in-Charge. Note:- Punned thickness only shall be measured and paid.
Supply and laying un-reinforced precast concrete cable cover,Class LV,Type-I,Flat size 250 mm x 150 mm x 40 mm complete all as specified and directed.
M&L for boring of holes under road pavement, hard standing by Trenchless technology using ultra sounding technique and including cable protection HDPE pipe of 100 mm dia for suitable for 0.4 Mpa working pressure complete all as specified and directed.
Supply and laying HDPE pipe PN-10 of bore size 50 mm laid in trenches/ducts, floors, fixed to walls including fittings complete all as specified and directed.
Material & labour for earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth wire 4 mm dia, by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 40 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. NOTE :- The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI strip beyond 7.5 Metre shall be measured and paid for separately.
Material & labour for earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth strip 32mm x 6 mm, by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 40 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. NOTE :- The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI strip beyond 7.5 Metre shall be measured and paid for separately.
Supply, Installation, testing and commissioning of 30 KVA UPS system suitable for 20-30 min power backup, 3:3 Phase Rack/Tower mountable On-Line UPS (ITA2 Series),Interlink connectors for UPS-480VDC,DC breaker for UPS 30 KVA Industrial On Line system alongwith SMF Batteries 12 V-65/70 AH-40 Nos with Battery Rack suitable for placing above batteries-40 nos complete all as specified and directed. Make - Microtek, APC, Eaton, Numrice, Elnova, BPE.
Supply, installation, testing & commissioning of hi wall split units BEE 5 star rated indoor/outdoor (evaporator & condenser shall be of copper), copper tubing of required size for proper installation and outdoor unit fixed of stand (including stand) complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality of capacity 1.0 TR 230 volt AC 50 c/s AC supply complete all as specified and directed.
S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified and directed.
S&F sheet metal enclosure for DB's double door SPN 4 Way with 200 Amps bus bar, 240 V complete fixed on wall all as specified and directed.
S&F sheet metal enclosure for DB's double door TPN 4 Way with 200 Amps bus bar, 415 V complete fixed on wall all as specified and directed.
Supply and fixing 415V 10 KA 'C' curve MCB of current carrying capacity TPN/FP 40 to 100 Amps in the DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing 240V, 10KA 'C' curve MCB of current carrying capacity SPN 40 Amps in the DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing 240V, 10KA 'C' curve MCB of current carrying capacity SP 5 to 32 Amps in the DB complete with connection testing and commissioning all as specified and directed.
M&L for submain wiring two runs of single core PVC insulated multi stranded copper conductor cable FRLS of size 4 sqmm drawn through and including PVC casing & caping with necessary fittings, with one run of 2.5 Sqmm single core multi stranded copper conductor cable FRLS as earth continuity to common earth doly as earth wire complete all as specified and directed. Note : Two runs of main wire and one run of earth wire & one run of casing caping shall be measured and paid as one length.
M&L for pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc. for rough finished surfaces of concrete complete all as specified and directed.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less then 0.9 mm dia complete all as specified and directed.
M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less then 0.9 mm dia complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate in beams,cantilever,bressummers,over 1.5 m span completed all as specified and directed.
M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
S&F powder coated aluminium frame (Minimum thickness of powder coating not less than 50 micron) for doors, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing complete all as specified and directed.
S&F Aluminium powder coated Door shutters of any colour (Minimum thickness of powder coating not less than 50 micron),aluminium sections weighing 0.55 kg/m incl necessary joining cleat glazing clips,rubber neoprene packing, handles 150 mm long 2 Nos in each door, hinges 100 mm long 3 nos each door, aluminium snap beading screws complete all as specified.
S&F for sheet glass 4.8 mm thick, ordinary quality fixed in aluminium door shutters with rubber beading in square exc. 0.5 sqm in each pane complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coat of white wash complete all as specified and as directed.
S&F Anodised aluminium snap grid frame work (600mm x 600 mm) for false ceiling complete all as specified and directed by Engineer-in-charge.
S&F 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcereous material reinforced with cellulose fibre for fixing in 600 x 600 mm grid (Frame work for ceiling shall be measured and paid separately) including applying two coats of OBD complete all as specified and directed.
SANJOLI CONSTRUCTION COMPANY
RISING ELECTRICALS
new india engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .