Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹18.2 Cr
EMD Value
₹18.2 L
Closing Date
27 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Balance Civil, Electrical, Plumbing, External Development and all other associated work necessary for completion /Functioning of the Building including repair work if any at BSF Humhama, Srinagar
NBCC/SBG-N/BSF-Humhama-04Dated07-02-2023~EWbf887572b4da12469cdab113
NBCC/SBG-N/BSF-Humhama-04Dated07-02-2023
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹18.2 L
27 Feb 2023
7 Feb 2023
27 Feb 2023
7 Feb 2023
27 Feb 2023
BILL OF QUANTITY
Name of Work: Balance Work of Construction Residential and Non-Residential Buildings i/e Development Works at Ftr. HQ, STC/ Composite
Hospital/Bns Humhama, Srinagar.
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Civil Work Based on DSR-2021
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides
2.8 and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of
surplus excavated soil as directed, within a lead of 50 m.
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and
dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil,
2.10 and then returning the soil as required, in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated
soil as directed, within a lead of 50 m :
2.10.1 All kinds of soil
2 2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. metre 225.00 255.55 57498.75
3 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 2600.00 417.35 1085110.00
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m,
4 2.11 but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). metre 200.00 127.00 25400.00
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in
5 2.25 layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, Cum 759.44 253.95 192859.79
lead up to 50m and lift upto 1.5m.
Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15
cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
SH-1: Earth Work (Total) 2936990.42
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate
40 mm nominal size derived from natural sources)
4.3 Centering and shuttering including strutting, propping etc. and removal of form work for :
9 4.3.1 Foundations, footings, bases for columns Sqm 29.85 307.95 9192.31
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III)
derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural
10 4.17 sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and Sqm 1066.86 681.65 727225.12
consolidated and grouted with fine sand, including necessary excavation, levelling & dressing &
finishing the top smooth.
SH-2: Cement Concrete (Total) 2634232.43
REINFORCED CEMENT CONCRETE
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost
of centring, shuttering, finishing and reinforcement - All work upto plinth level.
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate
20 mm nominal size derived from natural sources)
5.9 Centering and shuttering including strutting, propping etc. and removal of form for
12 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 241.02 307.95 74222.11
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access
15 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 15.00 608.35 9125.25
16 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 150.00 804.25 120637.50
17 5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 135.00 657.75 88796.25
5.9.16 Edges of slabs and breaks in floors and walls
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone
aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and
5.18 shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand)
etc. complete, excluding plastering of the jambs, sills and soffits.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position
and binding all complete upto plinth level.
20 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 72800.00 89.65 6526520.00
21 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. metre 15000.00 64.70 970500.00
Providing and laying in position ready mixed or site batched design mix cement concrete for
reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural
sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in
5.33 recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve
durability and workability without impairing strength; including pumping of concrete to site of laying,
curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and
reinforcement as per direction of the engineer-in-charge.
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be
payable separately. In case the cement content in design mix is more than 110% of the specified
minimum cement content, the contractor shall have discretion to either re-design the mix or bear
the cost of extra cement.
22 5.33.1 All works upto plinth level Cum 472.05 8683.80 4099161.74
5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum
23 5.33.2 All works above plinth level upto floor V level Cum 4.54 10306.20 46824.98
5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum
Add for using extra cement in the items of design mix over and above the specified cement content
SH-3: RCC Work (Total) 14993172.06
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
foundation and plinth in:
25 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 280.00 6658.25 1864310.00
SH-4: Brick Work 1864310.00
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,
machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of
required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1
cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.
complete at all levels.
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine
8.3 polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops
28 8.4 of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. metre 854.16 475.55 406195.79
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen
platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary
holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be
specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle
green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
SH-5: Marble Work (Total) 6797217.91
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with
matching wood beading
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative
type, core of block board construction with frame of 1st class hard wood and well matched
commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of
32 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 2130.24 2015.75 4294031.28
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges
with necessary screws
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of
flush door shutters (over all area of door shutter to be measured).
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass
excluded) (overall area of door shutter to be measured):
35 9.24.2 Rectangular or square Sqm 62.40 173.95 10854.48
36 9.7.7.2 Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). Sqm 62.40 2231.20 139226.88
9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 0.00
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square
or round bars etc. including priming coat with approved steel primer all complete.
38 9.48.1 Fixed to steel windows by welding kg 17500.00 181.00 3167500.00
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary
screws etc. complete :
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary
screws etc. complete :
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc.
43 9.68.2 250 mm weighing not less than 280 grams each 2097.00 51.90 108834.30
44 9.68.3 200 mm weighing not less than 240 grams each 1950.00 45.20 88140.00
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of
lever handles of approved quality with necessary screws etc. complete.
9.81 Providing and fixing bright finished brass handles with screws etc. complete: 0.00
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws,
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating
9.101 not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with
necessary screws etc. complete.
50 9.101.2 Twin rubber stopper each 520.00 62.25 32370.00
SH-6: Wood Work (Total) 14463230.14
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm
10.5 M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying
a priming coat of approved steel primer.
51 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces Sqm 65.52 4781.15 313260.95
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top
/centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of
standard rolled ions, joints mitred and flash butt welded and sash bars tenoned and riveted,
10.11 including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but
excluding the cost of other fittings, complete all as per approved design, (sectional weight of only
steel members shall be measured for payment).
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C.
1:3:6 (1 Cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size)
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from
commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if
required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed
10.14 mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt
hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and
applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-
10.14.2 Profile C
53 10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb metre 5651.20 471.25 2663128.00
10.14.3 Profile E
54 10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb metre 650.00 511.40 332410.00
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of
internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked
55 10.18 for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm each 628.00 185.20 116305.60
dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar
bent to shape as per standard drawing.
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position
10.25 and applying a priming coat of approved steel primer using structural steel etc. as required.
56 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 25000.00 142.30 3557500.00
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory
windows, all complete with :
57 10.30.1 4.0 mm thick glass panes (weights not less than 10kg/sqm) Sqm 149.40 940.30 140480.82
58 10.30.2 5.5 mm thick glass panes (weights not less than 12.5kg/sqm) Sqm 1362.98 1243.50 1694863.14
SH-7: Structural Steel (Total) 17951748.51
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished
11.3 with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of
steps etc. complete.
59 11.3.1 40mm thick with 20mm nominal size stone aggregate. Sqm 143.28 545.00 78087.60
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm
thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm
nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble
11.10 chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3:1 (3 cement :
1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by
volume, including cement slurry etc. complete.
60 11.10.4 white cement without any pigment Sqm 50.00 917.90 45895.00
Marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm
thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4
11.12 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume :
18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) :
61 11.12.1.4 White cement without any pigment Sqm 578.41 1569.65 907898.12
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat
cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc.
complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
62 11.20.1 Light shade pigment using white cement Sqm 130.00 1233.05 160296.50
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement
11.26 slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete
with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average)
thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with
pigment to match the shade of the slabs, including rubbing and polishing complete.
65 11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. metre 1270.50 157.35 199913.18
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by
the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours,
shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar
1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing
the joints with white cement and matching pigments etc., complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved
11.41 make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and
matching pigments etc., complete.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),
with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all
11.46 colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3
coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white
cement & matching pigments etc. complete.
SH-8: Flooring Work (Total) 16437407.42
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Providing and fixing fale ceiling at all height including pviding and fixing of frame work made of
special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120
gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x
1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to
the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat
fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size
and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the
spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80
mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall
be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of
2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm
12.45 thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230
mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the
help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush
finish of tapered and square edges of the board with recommended jointing compound , jointing
tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint
and two coats of primer suitable for board, all as per manufacturer's specification and also
including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of
perimeter channels suitably fixed, all complete as per drawings, specification and direction of the
Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with
BIS certification marks)
SH-9: Roofing Work 2918620.74
13.4 12 mm cement plaster of mix :
13.5 15 mm cement plaster on rough side of single or half brick wall of mix: 0.00
13.16 6 mm cement plaster of mix : 0.00
74 13.18 Neat cement punning sqm 309.00 67.80 20950.20
Extra for providing and mixing water proofing material in cement plaster work in proportion 50kg
recommended by the manufacturers. cement
Extra for plastering exterior walls of height more than 10 m from ground level for every additional
height of 3 m or part thereof.
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50
13.42 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's
78 13.42.1 Two or more coats on new work Sqm 40712.58 92.75 3776091.48
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
79 13.43.1 Water thinnable cement primer Sqm 24871.99 64.45 1602999.86
13.45 Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of
exterior primer applied @ 2.20kg/10 sqm
13.50 Applying priming coat:
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
82 13.61.1 Two or more coats on new work Sqm 15000.00 131.45 1971750.00
SH-10: Finishing Work (Total) 33326166.14
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after
excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road
roller including making good the undulations etc. and re-rolling the sub grade and disposal of
surplus earthwith lead upto 50 metres.
16.3 Supplying and stacking at site.
84 16.3.1 90 mm to 45 mm size stone aggregate Cum 554.20 1937.60 1073817.92
85 16.3.2 63 mm to 45 mm size stone aggregate. Cum 415.65 1624.50 675223.43
86 16.3.6 Stone screening 13.2 mm nominal size (Type A). Cum 415.65 1865.00 775187.25
87 16.3.7 Stone screening 11.2 mm nominal size (Type B). Cum 277.10 2065.70 572405.47
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in
uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in
88 16.4 stages toproper grade and camber, applying and brooming requisite type of screening / binding Cum 1662.60 865.80 1439479.08
material to fill up interstices of coarse aggregate, watering and compacting to the required density .
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating
16.30 the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler,
cleaning and preparing the existing road surface as per specifications :
90 16.30.2 On bituminous surface @ 0.50 Kg / sqm Sqm 5542.00 36.60 202837.20
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and
11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone
16.33 chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run
bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to
be paid for separately).
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180
micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine
aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and
finishing with road roller all complete.
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with
road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the
surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete.
93 16.47.1 New work (Two or more coats) Sqm 1171.00 158.50 185603.50
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete
1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of
94 16.63 dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, Sqm 150.00 529.80 79470.00
including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement
concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1
cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except
95 16.69 at sharp curve shall not to more than 5mm), including making drainage opening wherever required Cum 176.00 8613.55 1515984.80
complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath,
parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape,
made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick
compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks
16.91.1 into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints
with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete
paver block of M-35 grade with approved colour, design & pattern.
60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for
paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 coarse sand) with
joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of
engineer-in charge.
SH-11: Road work (Total) 11176511.11
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km
complete (manure measured in stacks will be reduced by 8% for payment) :
98 2.7 Fine dressing of the ground. Sq.Mt. 10517.00 3.70 38912.90
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-
Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or
2.10 more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good
earth, if needed (the grass and earth shall be paid for separately).
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing
ground prepared with proper level and ramming with required tools wooden and than rolling the
102 2.34 surface with light roller make the surface smoothen and light watering the same maintenance for Sqm 10517.00 87.50 920237.50
30 days or more till the grass establish properly,as per direction of officer in charge
SH-12: Horticulture Work (Total) 1483422.85
Waterproofing Work
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed
portions of W.C., kitchen and the like consisting of:
Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound
(i) conforming to IS 2645 in recommended proportions including rounding off junction of vertical and
horizontal surface.
IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing
(ii) compound in recommended proportion including rounding off junction of vertical and horizontal
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm
wide and pasted to each other with bitumen @ 1.7 kg/sqm).
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm
thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting
of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane
manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat
the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing
the surface complete. The vital physical and chemical parameters of the membrane shall be as
under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear
strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not
less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D -
5147. The laying of membrane shall be got done through the authorised applicator of the
manufacturer of membrane.
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of
105 14.92 thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane Sqm 20.00 103.50 2070.00
by Butane Torch as per manufactures recommendation.
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment
to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums,
reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by
mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and
3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same
from negative (internal) side with the help of synthetic fiber brush. The material shall meet the
22.23 requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more
than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic
pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a
width of 0.50mm. The work shall be carried out all complete as per specification and the direction
of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any
106 22.23.1 For vertical surface two coats @0.70 kg per sqm Sqm 420.82 406.25 170959.34
107 22.23.2 For horizontal surface one coat @1.10 kg per sqm. Sqm 224.30 311.50 69869.45
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for
22.4 construction/ expansion joints between two RCC members and fixed to the reinforcement with
binding wire before pouring concrete etc. complete :
108 22.4.1 Serrated with central bulb (225 mm wide, 8-11 mm thick) Metre 137.40 285.60 39241.44
SH-13: Waterproofing Work (Total) 1222370.66
Providing & Laying cement concrete using broken brick/brickbats 25 mm to100 mm size with 50%
109 NS-1 of cement mortar 1:5 ( 1cement : 5 coarse sand )admixed with proprietary water proofing Cum 441.28 3770.25 1663732.10
compound conforming to IS:2645 in sunken and like complete.
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Storage to be formed of 19mm commercial board at the back with fixed shelves made of 19mm
thick commercial board with all exposed edges finished with 2mm thick PVC edge band (factory
finished) as per details & architect approval. Shutters of cabinet to be formed of 19mm thick
commercial board finished with 1mm thk laminate on outer surfaces and enamel painted whitefrom
inside as er specifications.. Rear backing of cabinet to be formed with 12mm commercial plywood
complete in all respect including 100mm high laminate finished skirting as per
approval/details.The cupboard shall have 2 nos drawer running on 12mm drawer channelof best
quality of approved makes. one drawer shall be lockable. the brass lcok shall be used for the
same. the drawer shall have 100mm Long SS handles fixed by cutting a chase in the front of the
drawer. Storage to be complete with hardware installed as per the appoved model/make & as
directed to consist of the following: Each Shutter to have 3 nos of automatic spring loaded hinge of
approved make installed strictly a per manufacturers guidelines with requisite tools/jigs. Each set
of shutters to be provided with 1no. multi purpose lock as specified, SS handles size 600mm long
as per approval, auto bolt, etc. (as per approved make) Basic price of Laminate @ Rs.550/ Sqmt
(front area to be measured from bottom i/c height of leg/skirting to top of cabinet). the depth of
cupborad shall be 600mm depth including the thickness of the backing ply.Hardware: All hardware
shall be as per the appoved model/make all complete.
NS Items (Civil Work) - TOTAL 3395202.10
INTERNAL PLUMBING
Providing and Fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron
P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually
17.1 controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete
including cutting and making good the walls and floors wherever required
White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and
lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings &
C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and
mosquito proof coupling of approved municipal design complete, including painting of fittings and
brackets, cutting and making good the walls and floors wherever required :
112 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 10.00 6941.30 69413.00
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of
430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with
17.4 standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete,
including painting of fittings and brackets, cutting and making good the walls and floors wherever
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
113 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Each 2.00 5268.85 10537.70
Providing and Fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass
17.7 waste of standard pattern, including painting of fittings and brackets, cutting and making good the
walls wherever require :
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
Providing and Fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI
17.10 brackets and stainless steel waste with plug 40mm including painting of fittings and brackets,
cutting and making good the walls wherever required.
115 17.10.2.1 Kitchen sink without drain board 610x510 mm bowl depth 200 mm Each 200.00 4274.40 854880.00
116 17.10.1.1 Kitchen sink with drain board 510x1040 mm bowl depth 250mm. Each 4.00 6008.45 24033.80
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)
117 17.31 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and Each 208.00 1411.15 293519.20
washers complete.
Providing and Fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance
118 17.71 from wall of standard shape with bracket of the same materials with snap fittings of approved Each 208.00 146.30 30430.40
quality colour and make, weighing not less that 105gms
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass
screws with concealed fitting arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm,
weighing not less than 190 gms.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701
120 18.48 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet Litres 110000.00 9.70 1067000.00
and overflow pipes but without fittings and the base support for tank.
Providing and Fixing CP brass bib cock for W.C, kitchen & bath of approved quality conforming to
Providing and Fixing CP brass angle valve for basin mixer and geyser points of approved quality
conforming to IS:8931
18.22 Providing and Fixing C.P. brass shower rose with 15 or 20mm inlet:
Providing and Fixing C.P. brass stop cock (concealed) of standard design and of approved make
conforming to IS:8931:
18.21 Providing and Fixing unplastcised PVC connection pipe with brass unions:
18.21.2 45 cm length
Providing and Fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of
75mm with concealed fitting arrangements. Weighing not less than 106 gms.
SH-14: Internal Plumbing (Total) 5249523.10
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
SOIL, WASTE & VENT PIPE
18.58 Providing and Fixing PTMT grating of approved quality and colour.
127 18.58.1.2 Circular type: 125mm nominal dia with 25mm waste hole. Each 808.00 45.25 36562.00
RAINWATER PIPES (ROOFING) (DSR ITEMS)
Providing and Fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised
12.42 Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring
conforming to IS:5382 leaving 10mm gap for thermal expansion.
12.42.5 Bend 87.5 degree
12.42.6 Shoe (Plain)
WATER SUPPLY- INTERNAL WORK (DSR -ITEMS)
Providing and Fixing GI pipes complete with GI fittings and clamps, including cutting and
making good walls etc. (internal work).
Internal work-Exposed on walls
132 18.10.3 25mm dia nominal bore Metre 25.00 491.20 12280.00
134 18.10.4 32mm dia nominal bore Metre 1482.00 563.60 835255.20
135 18.10.5 40mm dia nominal bore Metre 15.00 725.15 10877.25
136 18.10.6 50mm dia nominal bore Metre 879.00 893.20 785122.80
Painting GI pipes and fittings with enamel paint over a ready mixed priming coat, both of approved
quality for new work.
139 18.38.3 25mm dia nominal bore Metre 25.00 25.60 640.00
140 18.38.4 32mm dia nominal bore Metre 1482.00 30.70 45497.40
141 18.38.5 40mm dia nominal bore Metre 15.00 36.05 540.75
142 18.38.6 50mm dia nominal bore Metre 879.00 43.05 37840.95
Providing and Fixing GI Union in GI pipes including cutting and threading the pipe and making long
screws etc. complete (new work).
Providing and Fixing brass ball valve of approved quality, High or low pressure, with plastic floats
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
18.16 Providing and Fixing brass stop cock of approved quality
18.17 Providing and Fixing gun metal gate valve with CI wheel of approved quality (screwed end).
Providing orange colour safety foot rest of minium 6 mm thick plastic encapsulated as per IS :
10910 on 12 mm dia steel bar conforming to IS : 1786 having minimum cross section as 23
mmx25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm
space beetween protruded legs having 2mm tread on top surface by ribbing or chequering besides
necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing
and suitable to with stand the bend test and chemical resistance test as per specifications and
having manufacture's permanent identification mark to be visible even after fixing, including fixing
in manholes with 30x20x15 cm cement concrete block 1:3:6(1 cement: 3 Coarse and :6 graded
stone aggregate 20 mm nominal size) complete as per design.
Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot &
cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps
18.8 at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and
the cost of cutting chases and making good the same including testing of joints complete as per
direction of Engineer in Charge.
Concealed work including cutting chases and making good the walls etc.
161 18.8.1 15 mm nominal outer dia pipes Metre 100.00 441.15 44115.00
162 18.8.2 20 mm nominal outer dia pipes Metre 296.00 513.75 152070.00
163 18.8.3 25 mm nominal outer dia pipes Metre 20.00 626.05 12521.00
164 18.8.4 32 mm nominal outer dia pipes Metre 30.00 712.75 21382.50
Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot &
cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps
18.7 at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and
the cost of cutting chases and making good the same including testing of joints complete as per
direction of Engineer in Charge.
Internal work- Exposed on wall 0.00
165 18.7.3 25 mm nominal outer dia pipes Metre 40.00 408.55 16342.00
166 18.7.4 32 mm nominal outer dia pipes Metre 2350.00 500.95 1177232.50
167 18.7.5 40 mm nominal outer dia pipes Metre 350.00 674.35 236022.50
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
EXTERNAL PLUMBING WORKS
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
(external work)
168 18.12.4 32mm dia nominal bore Metre 580.00 457.70 265466.00
169 18.12.5 40mm dia nominal bore Metre 235.00 558.35 131212.25
170 18.12.6 50mm dia nominal bore Metre 240.00 654.20 157008.00
171 18.12.7 65mm dia nominal bore Metre 275.00 768.60 211365.00
172 18.12.8 80mm dia nominal bore Metre 40.00 919.10 36764.00
Constructing brick masonry chamber 30x30x50cms inside with 1st class brick work in cement
mortar 1:4 (1 cement : 4 fine sand) for stop cock with CI surface box 100x100x75mm (inside) with
hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement
mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement
complete as per standard design.
173 18.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 150.00 1712.15 256822.50
Constructing masonary Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4 (1
cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm
bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement
: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation,
foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortor 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished
with a floating coat of neat cement complete as per standard design:
174 18.33.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 12.00 10102.50 121230.00
Painting G.I pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.
176 18.40.5 40mm diameter pipe Metre 235.00 20.95 4923.25
177 18.40.6 50mm diameter pipe Metre 240.00 25.25 6060.00
178 18.40.7 65mm diameter pipe Metre 275.00 31.30 8607.50
179 18.40.8 80mm diameter pipe Metre 40.00 36.40 1456.00
SEWERAGE EXTERNAL WORK (SCHEDULED ITEMS)
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff
19.6 mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints
etc. complete :
180 19.6.2 150 mm diameter RCC pipe Metre 2640.00 493.10 1301784.00
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at
top in cement motar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with
cement motar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement,
19.9 foundation concrete 1:3:6 mix (1 cement :3 coarse sand sand :6 graded stone aggregate 40mm
nominal size), and making necessary channel in cement concrete 1:2:4 ( 1cement : 2 coarse sand
: 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all
complete as per standard design:
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal
diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg., fixed
in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement
plaster at the external surface shall be paid for separately) :
181 19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 130.00 11886.45 1545238.50
Extra for depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m
182 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 40.00 6986.80 279472.00
Constructing brick masonry circular type manhole 1.22m internal dia at bottom and 0.56m dia at
top in cement motar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with
cement motar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement,
19.11 foundation concrete 1:3:6 mix (1 cement :3 coarse sand sand :6 graded stone aggregate 40mm
nominal size), and making necessary channel in cement concrete 1:2:4 ( 1cement : 2 coarse sand
: 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all
complete as per standard design:
1.68 mtr deep with SFRC Cover and frame (heavy duty HD-20grade designation) 560mm internal
diameter conforming to IS 12592,total weight of cover and frame to be not less than 182kg. Fixed
in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including centering, shuttering all complete. (Excavation,foot rests and 12mm thick
cement plaster at the external surface shall be paid for separately)
183 19.11.1.1 With commom burnt clay F.P.S(non modular) bricks of class designation 7.5 Each 10.00 22951.95 229519.50
Extra for depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68m to 2.29m
184 19.12.1 With commom burnt clay F.P.S(non modular) bricks of class designation 7.5 Metre 15.00 9068.35 136025.25
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C.
top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm
19.7 nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of
neat cement complete as per standard design :
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm
19.7.1 internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23
kg and weight of frame 15 kg):
185 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 30.00 11687.10 350613.00
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks
19.15 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and
approved quality 19.19.1 L D- 2.5 H D - 20
187 19.19.3.1 Circular shape 560 mm internal diameter Each 13.00 1494.20 19424.60
Making soak pit 2.50 mtr diameter 3.0 mtr deep with 45x45 cm dry brick honey comb shaft with
19.32 bricks and S.W. drain pipe 100mm dia, 1.80 mtr long complete as per standard design.
189 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 8.00 28029.15 224233.20
SH-15: Water Supply & Sewerage Work (DSR Items) (Total) 10333808.15
SANITARY INSTALLATIONS (NON-SCHEDULED ITEMS)
Providing and Fixing 15mm C.P brass mixing fitting for kitchen sink with swinging spout complete.
Including cutting and making good the walls wherever required .
199 C.P. brass mixing fitting Each 208.00 1076.03 223814.24
Supply, Installation, Testing & Commissioning stainless steel cockroch trap consisting of 0.45 mm
NSP-2 thick inner and outer cup and 1.00 mm thick top grating (Jali) with ring to be fixed inside ‘P’ traps
with cement concrete.
SOIL, WASTE & VENT PIPES (NON -SCHEDULE ITEMS)
Providing and Fixing uPVC pipes type -B conforming to IS: 13592 for soil, waste and vent pipes
including all fittings rubber ring type (plain or with access door) e.g. bends, junctions, cowls,
offsets, access pieces, jointing with rubber ring joints with lubricant etc. fixed with clamps to walls
with cement concrete 1:2:4 blocks complete in all respects.
For soil, waste and vent pipes
Providing, fixing, jointing and testing in position the following uPVC pipes conforming to IS 4985 of
6 kg/sqcm pressure rating including all fittings, solvent weld joints, testing complete for drainage
NSP-4 system cut to required length to be laid under floor including covering all around with cement
concrete and making good the same complete as required.
For waste pipes
NSP-5 Providing and Fixing uPVC cleanout plug with openable cap for uPVC pipes
204 For 110 mm OD pipes Each 40.00 58.68 2347.20
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Providing and Fixing 110x110 mm uPVC 'P' trap/ U Trap with 2-3 inlets required size ftting with
seal 50 mm of self cleansing design floor/urinal trap without vent suspended with supporting clamp
or in sunken portion including cutting and making good the walls and floors wherever required
complete in all respects.
Providing and Fixing uPVC floor drain of following size inlet and outlet including cutting and
making good the walls and floors wherever required complete in all respects.
WATER SUPPLY- INTERNAL WORK (NON-SCHEDULED ITEMS)
Supply, installation, testing & commissioning of G.I. Pipes Class 'B' (Medium grade) conforming to
I.S. 1239 with G.I. Fittings conforming to IS : 1879 (Part I to X) such as tees, crosses, plug, socket,
elbows, reducers, flange, check nut, flanges & clamps, hanger, structural steel supports as
required/directed at Site including painting with enamel paint two or more coats, cutting and
making good the walls etc. complete in all respect as per direction of engineer-in-charge.
207 a 65mm nomial bore Metre 450.00 517.36 232812.00
208 b 80mm nominal bore Metre 300.00 675.21 202563.00
Total Plumbing Non Schedule Items (Total) 1109664.93
ELECTRIC ITEMS BOQ BASED ON DSR 2022
INTERNAL ELECTRICAL
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
1.8 with piano type /Modular type switch, phenolic laminated sheet, suitable size M.S. box and
earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with
modular switch, modular plate, suitable GI box and earthingthe point with 1.5 sq.mm. FRLS PVC
insulated copper conductor single core cable etc as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core
211 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC Metre 7800.00 334.00 2605200.00
insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
213 1.14.4 2x6 sqmm+1x6 Sqmm earth wire. Metre 2000.00 439.00 878000.00
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,
1.18 unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE
216 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing Metre 3000.00 47.00 141000.00
surface/ recessed steel/ PVC conduit as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit as
Supplying and fixing following piano type switch/ socket on the switch box /cover including
connections etc. as required.
218 1.23.7 TV antenna socket outlet Each 194.00 95.00 18430.00
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box
including connections but excluding modular plate etc. as required.
219 1.24.6 Telephone socket outlet Each 14.00 148.00 2072.00
220 1.24.7 TV antenna socket outlet Each 4.00 148.00 592.00
Supplying and fixing two module stepped type electronic fan regulator on the existing plate
switch box including connections but excluding modular plate etc. as required.
Supplying and fixing blanking plate on the existing plate & switch box excluding plate as
Supplying and fixing following size/module, GI box alongwith modular base & cover plate for
modular switches in recess etc. as required.
Supplying and fixing metal box of 150mmX75mmX60mm deep (nomina size) on surface or in
recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3
pin5/6 amps. socket outlet and 5/6 amps. piano type switch,connection, painting etc. as required.
(For light plugs to be used in non residential buildings).
Supplying and fixing metal box of 180mm X 100mm X 60mm deep(nominal size) on surface or in
recess with suitable size of phenoliclaminated sheet cover in front including providing and fixing 6
pin5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch,connection, painting etc. as
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
227 1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 Each 40.00 586.00 23440.00
amps modular switch, connection etc. as required.
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including
connection etc as required.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable,
including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
Installation of exhaust fan in the existing opening, including making good the damage, connection,
testing, commissioning etc. as required.
232 1.51 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Each 632.00 207.00 130824.00
2.0 MCCB, MCB & DB'S
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB
distribution board of steel sheet for 415 volts on surface/ recess complete with tinned copper bus
2.4 bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, powder painted
including earthing etc. as required.(But without MCB/ RCCB/ Isolator) All distribution board
should be with the space provision for ELCB.
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker
2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,
testing and commissioning etc. as required.
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Supplying & fixing following rating, four pole 415 volts isolator in the existing MCB DB complete
with connections, testing & commissioning etc as required.
Supplying & fixing following rating, double pole (single phase & neutral) 240 volts residual current
2.14 circuit breaker (RCCB) having sensitivity current upto 300 milli amperes in the existing MCB DB
complete with connections testing & commissioning etc as required.
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2
241 2.21 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on Each 40.00 269.00 10760.00
front side as required.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing
242 5.3 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre Set 80.00 6256.00 500480.00
long etc. (but without charcoal/ coke and salt) as required.
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including
243 5.11 connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. Metre 410.00 706.00 289460.00
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
EXTERNAL LIGHTING WORKS
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth
electrode, including connection/termination with GI thimble etc. as required.
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as
Laying of one number PVC insulated and PVC sheathed / XLPE aluminium conductor power cable
7.1 of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective
covering and refilling the trench etc. as required.
247 7.1.3 Above 95 sqmm and upto 185 sqmm Metre 4000.00 422.00 1688000.00
248 7.1.4 Above 185 sqmm and upto 400 sqmm Metre 35.00 474.00 16590.00
Supplying and making end termination with brass compression gland and aluminium lugs for
9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required
SH-16: Electric Work (DSR Items) (Total) 16757930.00
NON SCHEDULE ITEMS - ELECTRICALS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated
copper conductor single core cable in surface / recessed medium class PVC conduit, with piano
252 NSE-1 type /Modular type switch, phenolic laminated sheet, suitable size M.S. box and earthing the Point 2500.00 659.00 1647500.00
point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required (PVC
Conduit as already laid).
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable
in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated
copper conductor single core cable for loop earthing as required. (PVC Conduit as already laid).
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated
NSE-3 copper conductor, single core cable in surface/ recessed medium class PVC conduit as
required.(PVC Conduit as already laid).
254 2x2.5 sqmm+1x2.5 Sqmm earth wire. Metre 5000.00 182.00 910000.00
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated
NSE-4 copper conductor, single core cable in surface/ recessed medium class PVC conduit as
required.(PVC Conduit as already laid).
255 2x6 sqmm+1x6 Sqmm earth wire. Metre 2000.00 290.00 580000.00
NSE-5 LIGHT FIXTURE (INCLUDING LAMP)
Supply, Installation, testing,commissioning, receiving the lighting fixture & fan including
assembling etc. of the following lighting fixtures including fixing arrangement and with all
accessories as required with necessary GI pipe/steel pipe etc as required for hanging of lighting
Supplying, instalation, testing & commissioning of All fixtures shall be complete with lamps and
required control gear.All fluorescent tube light fixtures & LED fixtures shall be complete with control
gear & power factor improvement capacitor. Only high quality Electronic Ballasts are to be used.
For dimmable fixtures, HF dimmable electronic ballast to be used.Samples of all the fixtures with
all available colour shall be submitted to the architect/ client/ Project Manager before supply &
approval is taken.Please check the fixtures final quantity from the Architect / Project Manager
before ordering and be sure of actual requirement prior to ordering.
256 i 1x28 W T5 Batten, make- bajaj, Model-BTIP 12N Each 1850.00 568.00 1050800.00
257 ii 1x11W 's' type CFL make-Bajaj Model-(BJC 111web-1) Each 212.00 491.00 104092.00
258 iii 1x18W CFL(TC-DE). Make-Bajaj, Model-(BJDR SLH 1188 WB) Each 700.00 588.00 411600.00
259 iv 1x36W FTL (T8)Make Bajaj,Model no. (BJCEB136) Equivalent to Bajaj and Philips Each 620.00 1488.00 922560.00
Supply of Ceiling Fan of 1200mm sweep complete erected in position with all accessories. (Make-
Havels or equilalent)
Supplying of Exhaust Fan Heavy duty 230v A.C 50 cycles 375mm 1400 RPM complete reacted
in position wit all accessories.(Make-Havels or equivalent).
NSE-6 ENERGY METER
Supplying, instalation, testing & commissioning of metering system with single resister & single
tariff ISI marked 415 Volts, 50Hz, 1- Phase 2- Wire, accuracy class 1, 10- 60 A continuas rating
tariff energy meter with 100% neutral along with standard features as per as per ISI & with inbuilt
features like direct reading KW, KWH, MD and as follow.
Supplying, instalation, testing & commissioning of metering system with single resister & single
tariff ISI marked 415 Volts, 50Hz, 3- Phase 4- Wire, accuracy class 1, 10- 60 A continuas rating
tariff energy meter with 100% neutral along with standard features as per as per ISI & with inbuilt
features like direct reading KW, KWH, MD and as follow.
NSE-7 Building Panel For Type-2, 3
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Supplying, Fabricated, Installation, Testing & commissioning of Metal clad LT cubical wall/Floor
mounted self supported totally enclosed compartmentalized separate compartment for each Meter
with 1 No. SPN MCB earth bus & studs as required having padlock and sealing arrangement for
each compartment, dust and vermin proof IP-52 protection made of 1.6 mm thick CRCA sheet
steel duly powder coated for indoor application having arrangement for incoming/outgoing cable
termination, earthing, insulated aluminium Bus Bar 3 phase 4 wire of suitable size in a separate
chamber, suitable for 415V 3 phase 50 Hz AC supply duly prewired with 10 sq.mm Copper wire,
from in-comer MCCB to bus bar and upto connectors mounted in an integrated loose wire box
suitable for following mountings and switchgear accessories. (suitable for 9 Nos.single phase
Single source energy meter).
One (1) No.80A, 4P MCCB (25kA).
Metering & Indication:
Combined Ammeter/Voltmeter with Selector Switch and 80/5A, CL-1, 15VA CTs and 2A control
Sets of phase indicating lamp with 2A control MCBs.
Electrolytic high conductivity Aluminium 4P busbars rated at 100 amps(after deration) having a
maximum current density of 0.8 amp per sq mm insulated with heat shrinkable PVC sleeves.
9 Nos. meter chambers each of having 6mm thick bakelite sheet and sealing & locking
arrangement, suitable for fixing of 10Amp to 40Amp single phase digital electronic KWH meter
supplied by developer complete with internal wiring for the same. (Size of Meter chambers shall
be as per norms of local electricity authority)
25A, DP MCB with 10KA brreaking capacity -10Nos. (1 Nos. Spare)
264 Building Panel For Type-2 & 3 Set 25.00 102664.00 2566600.00
NSE-8 Building Panel For Type-5
Supplying, Fabricated, Installation, Testing & commissioning of Metal clad LT cubical wall/Floor
mounted self supported totally enclosed compartmentalized separate compartment for each Meter
with 1 No. SPN MCB earth bus & studs as required having padlock and sealing arrangement for
each compartment, dust and vermin proof IP-52 protection made of 1.6 mm thick CRCA sheet
steel duly powder coated for indoor application having arrangement for incoming/outgoing cable
termination, earthing, insulated aluminium Bus Bar 3 phase 4 wire of suitable size in a separate
chamber, suitable for 415V 3 phase 50 Hz AC supply duly prewired with 10 sq.mm Copper wire,
from in-comer MCCB to bus bar and upto connectors mounted in an integrated loose wire box
suitable for following mountings and switchgear accessories. (suitable for 4 Nos.single phase
Single source energy meter).
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
One (1) No.80A, 4P MCCB (25kA).
Metering & Indication:
Combined Ammeter/Voltmeter with Selector Switch and 80/5A, CL-1, 15VA CTs and 2A control
Sets of phase indicating lamp with 2A control MCBs.
Electrolytic high conductivity Aluminium 4P busbars rated at 100 amps(after deration) having a
maximum current density of 0.8 amp per sq mm insulated with heat shrinkable PVC sleeves.
4 Nos. meter chambers each of having 6mm thick bakelite sheet and sealing & locking
arrangement, suitable for fixing of 10Amp to 40Amp single phase digital electronic KWH meter
supplied by developer complete with internal wiring for the same. (Size of Meter chambers shall
be as per norms of local electricity authority)
25A, DP MCB with 10KA brreaking capacity -6 Nos. (2 Nos. Spare)
265 Building Panel For Type-5 Set 1.00 115495.00 115495.00
NSE-9 External Lighting Panel (OUTDOOR)
Supply, installation, testing and commissioning of front operated, front access, totally enclosed,
free standing, dust and vermin proof outdoor type Panel with IP65 ingress protection, fabricated
from 2 mm thick CRCA sheets, with hinged, gasketted and lockable doors including the cost of
interconnections, copper crimping lugs, brass glands, bonding to earth and painting, suitable for
use at 415 volts, 3 phase 4 wire 50 Hz system with 25 MVA rupturing capacity at 415 volts
complete as per specifications, as required and as below.
63A,25kA, 4P MCCB wth thermal magnetic overload, short circuit releases with contactor &
24hours 7days three phase timer for automatic operation & Auto/Manual operation
Metering & Indication :
Digital voltmeter (0-500V) with inbuilt selector switch & 2A control MCBs.
Digital ammeter (0-63A) with inbuilt selector switch and 63/5A, Cl-1, 10VA cast resin CT's
Set of RYB phase indicating lamps protected by 2A control MCB.
100A, TPN aluminium , colour coded bus bars suitable for 415V, 50Hz (after derating).
Eight(8) Nos. 32A, 10kA TPN MCB
266 External Lighting Panel as described above Set 4.00 78025.00 312100.00
Digitally signed by Om
Prakash 22:05:05 IST
DSR Rate Amount
S.No Description Unit Qty.
Item Code (in Rs.) (in Rs.)
Supply of 1100 Volt grade XLPE insulated extruded PVC inner and outer sheathed armoured
cables conforming to IS 7098 amended upto date including the cost of providing required gap
between adjacent cables (minimum one cable dia.) and including the cost of providing
identification tags etc. complete as per specification, as required.
270 d 4Cx10 Sq.mm cable Metre 50.00 193.00 9650.00
271 e 4Cx6 Sq.mm cable Metre 23.00 154.00 3542.00
NSE-11 EXTERNAL LIGHTING FIXTURE:
supply,installation, Testing & Commissioning of steel tubular swaged poles with bent on top along
with required accessories to accommodate street light fitting complete with cast iron base plate,
finial taper plug, bolts, nuts, junction box within the pole for incoming and outgoing cables (size up
to 4C x 10Sqmm) and a 6 amps SP MCB and screws as specified in type-410 SP31-5mtr.long
272 a Rate shall included the cost of inbuilt junction box (weather proof), MCB to fitting wth 2.5 sq mm Each 15.00 12397.00 185955.00
copper wires (2 Nos. 2.5 Sq.mm copper wire for phase & 1No. 1.5 Sq.mm copper wire for
earthing)complete wih base palte made from concrete civil foundation works. The pole shall e
painted with final PU paint as required.
supply,installation, Testing & Commissioning of steel tubular swaged poles with bent on top along
with required accessories to accommodate street light fitting complete with cast iron base plate,
finial taper plug, bolts, nuts, junction box within the pole for incoming and outgoing cables (size up
to 4C x 10Sqmm) and a 6 amps SP MCB and screws as specified in type-410 SP-3.5mtr.long
Rate shall included the cost of inbuilt junction box (weather proof), MCB to fitting wth 2.5 sq mm
copper wires (2 Nos. 2.5 Sq.mm copper wire for phase & 1No. 1.5 Sq.mm copper wire for
earthing)complete wih base palte made from concrete civil foundation works. The pole shall e
painted with final PU paint as required.
IP 65 Bottom opening Die-cast aluminium integral street light with HPSV 70W HPSV lamp, integral
control lamp holder connectors all duly wired connections and wiring from juction box with 3#2.5
sqmm copper wires, mounted on existing 9mtr pole with Bajaj-BJMSDT 03 70 SV IP65 Complete.
Total Electrical Work (Non Schedule Items) 17131164.00
Total Civil +Pluming Work (Incl. DSR+Non Schedule Items) 148293599.00
Total Electric Work (DSR+Non Schedule Items) 33889094.00
GRAND TOTAL 182182693.00
GRAND TOTAL 182182693.00
Digitally signed by Om
Prakash 22:05:05 IST
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
01NIT.pdf
Tender Document
03GCC-2022.pdf
Tender Document
04INTEGRITY PACT.pdf
Tender Document
05SCC.pdf
Tender Document
06MAKES.pdf
Tender Document
07SPECIFICATION.pdf
Tender Document
08DRAWINGS.pdf
Tender Document
02BOQHUM.pdf
Tender Document
corrigendum-1317-CORRIGENDUM 01.pdf
pdf • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .