Remaining Work of Fire Fighting Network, Sump & Pump Room at PSQ Cat B-32(P+4) Units at Atkot (Including Electrification ) Dist: Rajkot (10th Attempt) (SBD)

Name of Work :- Remaining Work of Fire Fighting Network, Sump & Pump Room at PSQ Cat B-32(P+4) Units at Atkot (Including

Electrification ) Dist: Rajkot.

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level consisting 12 mm thick Rupees Three Hundred Twenty

1 backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. 13.00 Sqmt 327.45 Seven and Paisa Fourty Five Only

Complete for any height(Gutka Plaster).

Providing and fixing standard extruded of ALLUMINIUM SECTION of size 63mm x 38.10mm x 1.2mm (Jindal Rupees One Thousand One

2 Section :20033,@Wt.0.593 kg per mt) with colour anodized alluminium frame for ventilation with 5mm thick 1.00 Sqmt 1163.92 Hundred Sixty Three and Paisa

transparent bronze colour tinted float glass as details etc complete for VENTILATION. Ninety Two Only

Celling painting (two coats) with plastic emulsion paint on undecorated wall surface to give an even shade Rupees One Hundred Ninety Six

including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered and Paisa Seventeen Only

smooth With Applying two coats of Fine Putty & One coats of primer on new wall surface to give an even shade

3 including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered 17.00 Sqmt

smooth. paint, primer and putty shall be as per approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint on undecorated wall surface to give an even shade Rupees One Hundred Eighty Five

including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered and Paisa Fourty Only

smooth With Applying two coats of Fine Putty One Coat of Primer on new wall surface to give an even shade

4 including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered 52.50 Sqmt

smooth.paint, primer and putty shall be as per approved make list of GSPHCL

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over and above applying Rupees One Hundred Fifty Five

one coat of primer to give an required shape even shade after throughly Brushing This surface to remove all Dirt and Paisa Twenty One Only

and remains of loose poweder material etc. complete. Primer shall be exterior weather coat and Paint shall be

5 Appex Weather Emulsion Only Paint and primer shall be as per approved make list of GSPHCL 105.00 Sqmt

Painting Two coats (excluding priming coat) on previously painted steel and other metal surface with enamel Rupees One Hundred Two and

6 paint, brushing, to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 289.00 Sqmt 102.41 Paisa Fourty One Only

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 ) PIPE having National Rupees Two Hundred Fifty One

Sanitation foundation ( NSF ) seal for potable water of following dia nominal bore tube fitting and clamps and Paisa Thirty One Only

7 including of making good the wall ceiling & floor etc. Complete (excavation of earth in trenches and filling will be 8.00 Rmt

paid separately)[C] 25 mm

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 ) PIPE having National Rupees Three Hundred Thirty Four

Sanitation foundation ( NSF ) seal for potable water of following dia nominal bore tube fitting and clamps and Paisa Eighty Nine Only

8 including of making good the wall ceiling & floor etc. Complete (excavation of earth in trenches and filling will be 13.00 Rmt

paid separately)[D] 32 mm

Providing and Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 90mm Dia Complete Rupees Three Hundred Twenty

with Special flings, Compressor type Fittings, Wall clips on wooden patty including making good the ceiling and Five and Paisa Twenty Seven Only

floor on terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the

end near by Ground level rate are Inclusive of all Necessary Fittings G.I. Slotted Z Patti ( Minium 1.6 mm thick )

With Minumum 6mm Dia Etc.. required.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and fixing Gun metal check or non-return fullway wheel valve/Handle valve.(C) 25mm dia. Rupees Four Hundred Sixteen

and Paisa Fourty Seven Only

Providing and fixing Gun metal check or non-return fullway wheel valve/Handle valve.(E) 40mm dia. Rupees Six Hundred Fifty Six and

Paisa Eighty Six Only

Providing and fixing Gun metal check or non-return fullway wheel valve/Handle valve. 80mm dia. Rupees Nine Thousand Two

12 2.00 Each 9203.99 Hundred Three and Paisa Ninety

Constructing brick masnory chamber for under ground C.I.Inspection chamber and bends with Brick having Rupees Three Thousand Seven

crushing strength not less than 35 Kg/Sq.cm.in cement mortar 1:5,RCC top slab with1:3:6 in cement mortar 1:5 ( Hundred Ninety Three and Paisa

cover with 8 mm dia. steel @ 15 c/c and R.C.C. top slab with 1:2:4 mix ( 1 cement : 2 coarse sand,4- stone Eighteen Only

aggregates 20mm nominal size) foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth with a

13 floating coat of neat cement on walls & bed concrete etc. complete. Rate are also inclusive of outside plaster 2.00 Each

15mm thick in C.M 1:3 from top of chamber and all side upto 45cm deep below ground level (I) inside

dimensions 455mm x 610mm and 450mm deep for Single or multi purpose pipe line. Rate Also Inclusive RCC

Frame with cover MD 10 ton (Rubber mould Finish) Inner Size 600 x 450mm with all necessary fittings

Extra over above item for every additional depth of 0.1mtr. or part thereof beyond 450mm depth for brick Rupees Two Hundred Thirty Nine

14 masonry chamber. 4.00 Each

and Paisa Ninety Nine Only

Providing,fabricating and fixing of M.S. grill/Gate of approved pattern fabricated from M.S.flat , square bars, Rupees Seventy Three and Paisa

round bars,C-channel, box pipe as per detail Drawings.Rate is inclusive of welding with grinding smooth Ninety Four Only

surface ,two coat of Oil paint and one coat of yellow Zink chromate primer coat of approved brand only.Oil paint

15 shall be Luxol Enamel paint of Berger Paint India Ltd. or Asian paint Apcolite premium gloss Enamel of Asian 72.00 Kg

paint or Dulux premium gloss enamel of Dulux paint Only M.S. grill/Gate material should be ISI Mark only.

Providing and fixing in positon ISI marked Rotational moulded Polyethylene double layer cylindrical vertical Rupees Three and Paisa Ninety

storage tank (IS : 12701 ) water tank size including making inlet and outlet. Overflow and wash out arrangement One Only

with GI connection including using necessary M H for connection etc. Complete with closed cover including

applying two coats of oil pianting outside the tank etc complete.

17 Making of Core in RCC work of size 200 mm etc. complete RCC Core Cutting (MR) 3.00 Nos 1000.00 Rupees One Thousand Only

Providing I.S.I. mark 7 levers three keys brass pad lock of Navtal ( Godrej) make 65mm dia on Rupees Two Hundred Fourty

18 completion Project.. 2.00 Nos. 243.64 Three and Paisa Sixty Four Only

Providing and Fixing 3mm thick acrylic sheet with Vinyl letter color- 2073-dark grey for back ground Rupees Seven Thousand One

19 and color -2199-white letter with required screws...etc as per required sizes complete etc as per 1.00 Sqmt 7193.88 Hundred Ninety Three and Paisa

specification & instruction of Engineer incharge. Eighty Eight Only

Total Amount (A) =

Total Amount (A) =

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

ELECTRICAL WORK

20A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC 4.00 Point 340.00 Rupees Three Hundred Fourty

insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth Only

continuity in exisiting FIA approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected on/in Brick Wall

/ slab along with continuous G.I. fish wire to draw wires and laid in approved manner complete

with approved make 5/6 Amp. ISI make modular type switch and accessories mounted in

G. G.I. company fabricated metallic box covered with appropriate front plate modules erected

flushed with wall / ceiling with necessary modular lamp holder / modular ceiling rose / HD

Necessary sheet / tape / polythene / sand must be erected or filled in all box to prevent

mortar going into the box. Length of point wiring must not increase than 10 mtr. For that

necessary switch boards and their locations must be finalised before execution by agency

otherwise payment will not be done for extra long point. (For future extention, if required,

agency has to erect one higher size metal box and modular plate as per instruction of EIC.

Cost of blank plate shall be paid as per tender item) [Wire must be having box packing] [This

item include cleaning (inside/outside) of all G.I. switch boards, electric point box, fan box,

MCBDB & box cutting plaster finishing for modular plate without any gap] (Conductor

resistance should be as per IS:8130/1984)

20B For Fan Point (with 6 Amp. Modular type switch and two module hum free EME Five step 1.00 Point 502.00 Rupees Five Hundred Two

type Electronic fan regulator both having ISI mark) Cat.-II Only

20C For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat- 1.00 Point 234.00 Rupees Two Hundred Thirty

21 Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) 50.00 Mtr. 24.00 Rupees Twenty Four Only

RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish

wire to draw mains with necessary fittings and junction boxes for following dia. 20 mm. dia.

22A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade in 15.00 Mtr. 46.00 Rupees Fourty Six Only

exisitng FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner complete with FRLS PVC

insulated wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper

multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor

for earthing as per standard colour code. (for point wiring and Lighting SB mains) (Conductor

resistance should be as per IS:8130/1984) (In existing pipe)

22B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper 10.00 Mtr. 120.00 Rupees One Hundred Twenty

multi stranded conductor for earthing as per standard colour code. (Conductor resistance Only

should be as per IS:8130/1984) (In existing pipe)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

23 Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of wattage 2.00 Each 370.00 Rupees Three Hundred Seventy

0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made Only

from Aluminum exttusion having enough strength (Sample must be approved by EIC) With

Polycarbonate diffuser With Following Specification

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 2240 VAC,50Hz

(3) Rated input wattage max 24 W

(4) Rated input current ; 0.2 Amp.

(5) Power Factor : Min.0.90

(6) ATHD : Max. 15%

(7) Rated Luminous flux : Min. 2420 lm

(9) CRI : Min/ 80 Ra

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

(13) Surge Protection : Min. 2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting erected on

wall or ceiling.

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the manufacturer has to submit 4 yrs

free replacement Guarantee for complete Fixture) Approval will be given strictly subject

to item specification.

24 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, 1.00 Each 111.00 Rupees One Hundred Eleven

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, Only

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type,

with PC diffuser suitable Lamp holder.

25 Providing and erecting PVC body surface mounting LED Bulk head type 9 watt Lighting 1.00 Each 780.00 Rupees Seven Hundred Eighty

Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from Only

luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt

driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame

with Beam Angle 120 deg.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

26 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 1.00 Each 1929.00 Rupees One Thousand Nine

50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating Hundred Twenty Nine Only

Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5)

RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of

heavy duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder

coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance

)as per is 1709-1984, Aluminium body premium quality, Branded make,(14) Down road: up to

1.0 mtr as per site requirment, (15) Required fixing accessories, (16) 3 core 0.75 sq.mm ISI

wire as per site requirment, (17) No vibration and noise due to mechanical parts. (Agency has

to erect safey wire with ceiling fan and checked with EIC) (OEM has to approved model as per

tender specification and tested at ERDA) (Necessary test reports should be submitted strictly

at the time of approval. Sample approved by EIC subject to above specification only)

27 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface 1.00 Each 623.00 Rupees Six Hundred Twenty

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Three Only

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used

of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43) (i)

28 Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 25 Amp. 2.00 Each 111.00 Rupees One Hundred Eleven

suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected Only

in existing box. confirming to IS 8828/1996 with ISI Mark.

29 Providing & erecting 240 V MCB Double pole switch for M & I load (C curve) having 10 KA 1.00 Each 297.00 Rupees Two Hundred Ninety

breaking capacity & confirms to IS:8828 in Existing M.S. box having following capacity. For 25 Seven Only

30 Providing and Erecting Approved make ISI mark ELCB confirming to IS:12640/1988 having 1.00 Each 1950.00 Rupees One Thousand Nine

serial number printed on it and having sensitivity of 30 mA and breaking capacity of 10 KA and Hundred Fifty Only

suitable for 240 V, 50 Hz having characteristic of quick acting & Tripping with all advance

feature & do not incorporate any electronic component (mounted in MCBDB) Suitable for

operation on single phase 240 Volt max rating of (i) For 25 Amp. DP

31 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 20.00 Mtr. 275.00 Rupees Two Hundred Seventy

chloride rigid material with ignition free & flame proof confirming BS .All necessary Five Only

accessories and measuring of following sizes. [1] 75 mm x 50 mm trunking. [MK,

LEGRAND, OBO make Only]

32 Providing and erecting following type of Modular Type Accessories mounted with 20 G 2.00 Each 16.00 Rupees Sixteen Only

company fabricated metalic box, single mounting base frame covered with textured / metallic

front plate, modules erected with necessary connection. As desired by Engineer in charge.

Blank Plate Single. Cat.-II.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

33 Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 10.00 Mtr. 141.00 Rupees One Hundred Fourty

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 One Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts

if required. One wire 16.00 sq. mm

34 Supplying and fixing radium sticker or Painting the number and words for inventory 50.00 Each 2.00 Rupees Two Only

Identification on erected fittings / equipment’s or Such accessories (MCBDB, Panel, Pole,

Rack, Earthing, Pump, Door etc.) as may required with good quality of enamelled paint or fade

proof, weather proof, waterproof high quality vinyl radium sticker for indoor / outdoor

application as directed by engineer in charge. For one character 50 mm height.(The colour of

sticker / paint should be as per instruction given by EIC as per site requirement)

35 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg 1.00 Each 1991.00 Rupees One Thousand Nine

Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Hundred Ninety One Only

Type, UGTS Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge Time

24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%,

applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can

Construction : Deep drawn & CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer)

Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating,

External Coating - Pure Polyester Powder coating (UV Resistant),Brass forged CE

Marked valves with NRV & Auto Safety Release with safety Pin is of SS material, Made up

from 1.6mm thick sheet, Extinguishers confirmed to IS 15683:2018 and ISI marked.

Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg, 1. Necessary certificate &

and guarantee must be attached, 2. OEM has to provide wall mounting heavy duty

bracket/clamp, screw, hardware for installation. 3.Following printed marking Manufacturing

Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be of 3 Years.

Following Printed marking on equipment must be required:- Model No, Capacity, Gross

Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary

numbering / marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer]

(Make: KANEX, MINIMAX, CEASEFIRE)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

36 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled 1.00 Each 6526.00 Rupees Six Thousand Five

with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hundred Twenty Six Only

Hose & Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed

discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B,

C and electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External

coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI

Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body

confirms to IS 7285 and PESO ( Petroleum and Explosives Safety Organization) APPROVED,

Minimum Wall Thickness 4 to 4.2 mm, Extinguishers confirmed to IS 15683:2018 and ISI

marked. Referance Weight:-Gross Weight 16.4, empty weight 11.9 Kg, 1. Necessary

certificate & and guarantee must be attached, 2. OEM has to provide wall mounting heavy

duty bracket/clamp, screw, hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling period must

be of 5 Years. Following Printed marking on equipment must be required:- Model No,

Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due.

[with necessary numbering / marking with oil paint by painter as instructions given by

G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

37 Executing comprehensive (All-in-All) service & maintenance with spare parts as per terms & 4.00 Job 80394.00 Rupees Eighty Thousand

condition of tender Of DG set OEM/Authorized dealer (Mahindra powerol) for defect liability Three Hundred Ninety Four

period. For that main agency has to give All-in-All comprehensive maintenance contract to DG Only

set OEM/Authorized dealer (of Mahindra powerol DG) and copy of this maintenance contract

as per annexure and FDR must be submitted with final bill. Agency has to submit FDR of

approved bank as per clause 2.0, section 3, of Rs. 321576.00 + GST or quoted amount (as

per tender premium) whichever is higher to G.S.P.H.C.L. for minimum maturity period of Four

years in favour of G.S.P.H.C.L., Which will be released after successful completion of AMC &

at the end of defect liability period. DG set agency has to maintain written record of service &

maintenance during defect liability period duly sign by police dept. and submitted regularly to

G.S.P.H.C.L. DG set OEM/Authorized dealer (Mahindra powerol make) has to do

maintenance as per terms & condition in tender. Agency has keep D.G. set for continuous

trouble free operation during defect liability period as per given list.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

1) Replacing the fuel filters & Oil filters.

2) Checking the alignment and tappet setting.

3) Checking the carbon brushes / AVE.

4) Checking the oil level and replace the oil.

5) Leakages IN/OUT Cylinder.

6) All Electrical wrings including AMF panel if available.

7) Dynamo Setting.

8) RPM setting, Frequency & Voltage Adjustment.

9) Replacing material like fuel filters, gasket, tappet covers, diode rectifiers, Bridge rectifiers if

found defective and in not working condition.

10) Kindly note that labour with spares is included in the above.

11) Major Overhauling & Top overhauling shall be included in scope of Agency.

12) including Replacement of Battery if it is not working.

(For 62.5 KVA DG Set) [For 4 years]

38 Providng and erecting Approved make energy meter 3 phase 4 wire unbalanced load 500 V. 1.00 Each 2586.00 Rupees Two Thousand Five

50A / 100A complete erected as directed with necessary earth wire. Hundred Eighty Six Only

39 Providng and erecting Suitable set of CTS for 100A Energy Meter 3.00 Each 2085.00 Rupees Two Thousand Eighty

40A Executing comprehensive (All-in-All) service & maintenance with spare parts as per terms & 4.00 Job 2746.00 Rupees Two Thousand Seven

condition of tender for Jockey Fire Pump, starter panel etc. for defect liability period and copy Hundred Fourty Six Only

of this contract will be submitted before final bill. Agency has to quote rate accordingly.

Agency has to also provide the fitness certificate from system agency and submit to

G.S.P.H.C.L. Agency has to submit FDR of approved bank as per clause 2.0, section 3, of Rs.

10984.00 + GST or quoted rate (as per tender premium) whichever is higher to G.S.P.H.C.L.

for minimum maturity period of Four years in favour of G.S.P.H.C.L., Which will be released

after successful completion of A.M.C. & at the completion of defect liability period. Agency has

to maintain written record of service & maintenance during defect liability period duly sign by

police dept. and submit regularly to G.S.P.H.C.L. Agency has to give minimum three services

and demonstration per year and testing and training of entire fire hydrant, sprinkler, fire alarm,

Fire Extinguisher etc. during defect liability period and obtain necessary certificate from police

department and submitted to G.S.P.H.C.L. Agency has to do maintenance as per terms &

condition alternative in tender.

For 7.5 HP Pump [For 4 years]

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

40B Executing comprehensive (All-in-All) service & maintenance with spare parts as per terms & 4.00 Job 14646.00 Rupees Fourteen Thousand

condition of tender for Main Fire Pump, starter panel etc. for defect liability period and copy of Six Hundred Fourty Six Only

this contract will be submitted before final bill. Agency has to quote rate accordingly. Agency

has to also provide the fitness certificate from system agency and submit to G.S.P.H.C.L.

Agency has to submit FDR of approved bank as per clause 2.0, section 3, of Rs. 58584.00 +

GST or quoted rate (as per tender premium) whichever is higher to G.S.P.H.C.L. for minimum

maturity period of Four years in favour of G.S.P.H.C.L., Which will be released after

successful completion of A.M.C. & at the completion of defect liability period. Agency has to

maintain written record of service & maintenance during defect liability period duly sign by

police dept. and submit regularly to G.S.P.H.C.L. Agency has to give minimum three services

and demonstration per year and testing and training of entire fire hydrant, sprinkler, fire alarm,

Fire Extinguisher etc. during defect liability period and obtain necessary certificate from police

department and submitted to G.S.P.H.C.L. Agency has to do maintenance as per terms &

condition alternative in tender. Re-filling Hydraulically pressure for CO2 and ABC type fire

extinguisher if required to get the N.O.C. from fire department. [For 4 years]For 40 HP Pump

(20 HP x 2 nos. = 40 HP)

Total Amount (B) =

Total Amount (B) =

TOTAL AMOUNT (Rs.)

TOTAL AMOUNT (Rs.)

Contractor sign I/C, Executive Engineer