AREA DEVELOPMENT, CONSTRUCTION OF SHED FOR SECURITY STAFF AND STAGE INCLUDING FACILITIES OF ESSENTIAL SERVICES SURROUNDING IN CGKG SCHOOL AT CGDHQ - 15, OKHA UNDER GE (I) CG PORBANDAR

Amount

SCHEDULE 'A' B/R ITEMS

Surface dressing not exceeding 15cm deep in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 Metre in depth and getting out in any type of soil, complete all as specified and directed by Engineer-in-Charge.

Material & labour for Plain Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, PCC in foundation, complete all as specified and directed by Engineer-in-Charge.

Material & labour for Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.

Material & labour for Mild steel CRS TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams rough finshed concrete surfaces, etc. complete all as specified and directed by Engineer-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; rough finished flat surfaces not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed by Engineer-in-Charge.

Material & labour for RCC type B-1, 1 : 2 : 4 (Nominal Mix) (Using 20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed by Engineer-in-Charge.

Material & labour for RCC type B-1, 1 : 2 : 4 (Nominal Mix) (Using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engineer-in-Charge.

Material & labour for 40mm thick PCC type B-0, 1 : 2 : 4 (using 12.5mm thick graded stone aggregate) as in Damp proof course to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed by Engineer-in-Charge.

Spreading and levelling in layers not exceeding 25cm thick and well ramming including watering as required, complete all as specified and directed by Engineer-in-Charge.

Material & labour for Hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.

Material & labour for 75mm thick Cement concrete type C-2, 1 : 3 : 6 (using 40mm graded stone aggregate), complete all as specified and directed by Engineer-in-Charge.

Material & labour for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed by Engineer-in-Charge.

Material & labour for Pre-cast cement concrete block type C-1, 1 : 3 : 6 (using 20mm graded stone aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1 : 6, complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1 : 6 and making even and smooth, complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 5mm thick in Cement Mortar 1 : 4 with water proofing compound over 10 mm thick in Cement Mortar 1 : 6 on fair faces of brick work or concrete surfaces and making even and smooth, complete all as specified and directed by Engineer-in-Charge. (WPC will be measured and paid seperately)

Material & labour for rendering 5mm thick on fair faces of brick work or concrete of ceiling surfaces in Cement Mortar 1 : 3 and making even and smooth, complete all as specified complete all as specified and directed by Engineer-in-Charge.

Supply only liquid Water proofing compound, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 ±0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area not exceeding 2.00 Sqm each, complete all as specified and directed by Engineer-in-Charge. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured or payment purpose.)

Material & labour for Second class hardwood plain, solid, straight chowkhat and frame, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joint, complete all as specified and directed by Engineer-in-Charge.

Material & labour for 30mm thick Flush shutters, solid core construction, with particle board core and decorative vaneered face panels on both side, commercial type on both sides covered face veneered decorative type etc., complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 125mm long, stainless steel Butt hinges, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150mm long mat finished aluminium anodised barrel tower bolt and 12mm dia fixed (ISI marked), complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150mm long Mat finished aluminium anodised handle cast type and fixed (ISI Marked), complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mat finished alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 150mm long (ISI Marked), complete all as specified and directed by Engineer-in-Charge.

Material & labour for one coat of synthetic enamel paint over old wooden surfaces of any description not otherwise described over 10cm in width or grith including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in Cement Mortar 1 : 4 with water proofing compound on concrete roof surfaces and making even and smooth, complete all as specified and directed by Engineer-in-Charge. (WPC will be measured and paid seperately)

Material & labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg/m2 including cleaning surface, complete all as specified and directed by Engineer-in-Charge.

Material & labour for APP Based Polymeric memberane minimum weighing 3 kg /sqm and minimum 3mm thick Reinforced with polyster non wove fabric (wt not less than 150 gms/ sqm) laid on primed surface by forced application, complete all as specified and directed by Engr-in- Charge

Material & labour for applying two coats of bituminous aluminium paint on APP membrane of any description laid on roof slabs, complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new surfaces and applying two coats of oil bound distemper on wall surfaces over a coat of primer, complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new or old surfaces and applying two coats of oil bound distemper on ceiling surfaces over a coat of primer, complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new or old plastered/scraped surfaces and applying two or more coats of 100% Premium Acrylic emulusion paint having VOC 50gm/litre and UV resistance as per IS 15489 : 2004, Alkali and Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with Silicon Aditives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm, complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

Material & labour for Plain cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) as bed plates to vertical steel posts, etc including necessary formwork, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Rolled sections as in rafters / purlins where connected to common rafters etc conforming to Fe-410(W) (Gde-E 250), complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long of 11 to 15mm dia., complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-in-Charge.

Sand filling under floors including watering and consolidation, complete all as specified and directed by Engineer-in-Charge.

Material & labour Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing bird proofing net co-polymer nylon (100%), transparent in colour having mesh size 1.1/4 square inch, ultravoilet stabilized and weather proof fixed to the wall/ceiling surfaces upto 11.00 metre height with removable hooks to the wall/beams/purlins/truses/ columns etc. The nylon rope should have composition as per IS 667-1987 for nylon 6 with minimum breaking strength of not less than20.80 kg/sqcm with melting point at 225 degree centigrade and knots breaking strength not less than 19.50 kg sqcm, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Aluminium Composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxidant LDPE sandwitched between two sking of 0.5mm thick alloy sheet making a total sheet thickness of 4mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/ stone/ masonry/RCC walls/framed structure with necessaary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 40mm x 20mm with 1mm thickness in 600mm x 600mm size of grid including stainless steel screws, nut bolts, washers, cleats, weather silicon sealent for groove filling, backer rods etc., complete all as per manufacturer instruction's. All clamps and brackets shall be hot deep galvanised minimum 20 microns, (items include cost of aluminium frame, ACP Panels, Cramps, weather sealant, gasket, foam, fixtures, scaffolding, all machineries and any fastening strips, nuts, bolts, rivets, washers, etc complete). complete all as specified and directed by Engineer-in-Charge.

Material & Labour for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Modular Play Equipment Model No - 2 Seater Sea Saw OKP-STA-017 Actual Dimension L x W x H 6'4" x 1'6" x 2'5" for Climibing, Gathering, Stair Case, Sliding, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Modular Play Equipment Model No - MERRY GO ROUND OKP STA-019 Actual Dimension (L x W x H) : 4'0" (Dia) x 3'9", complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Modular Play Equipment Model No - 2 SEATER SWING OKP - EMS 9 Actual Dimension L x W x H 10'0" x 10'4" x 7'0", complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED Post top light fitting ashthetic designed Post top lantern with symmetric light distribution diffuser for uniform illumination with IP 65 protection with Suitable connector shall be provided for LED connection between driver output and LED and Extruded silicon loop gasket shall be provided in the lantern body to ensure weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc. including Stainless steel stand of suiatable size fixed on existing wall including make good of surface, complete all as specified and directed by Engineer-in-Charge. Make: Wipro/Philips/ crompton

Supply, laying & testing PVC insulated, PVC sheathed cable electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm , 3 core, 1100 Volts grade, complete all as specified and directed by Engineer-in-Charge. Make: Havells/Plaza/Finolex Polycab/ KEI

Supply and fixing Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and directed by Engineer-in-Charge.

Material & labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc. fixed concealed/ recessed in wall or ceiling etc. including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc for:- Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

One light point or one fan point controlled by one switch with cables 1.5 Sqmm size

One 3 pin socket outlet 6 Amps on the independent, with cables 1.5 Sqmm size

One 3 pin socket outlet 6 Amps on the same board with other switches, with cables 1.5 Sqmm size

Supply and fixing modular type 6 A one-way switch, 1 module, complete all as specified and directed by Engineer-in-Charge. Make :- Anchor Roma (Urban)/ Legrand (Myrius)/ L&T (EnGem)

Supply & fixing modular socket, 6 Amps, 2/3 pin combind 2 module, complete all as specified and directed by Engineer-in-Charge. Make :- Anchor Roma (Urban)/ Legrand (Myrius)/ L&T (EnGem)

Supply and fixing ceiling rose, surface bakelite, 65x17 mm three terminals, complete all as specified and directed by Engineer-in-Charge. Make :- Anchor Roma (Urban)/ Legrand (Myrius)/ L&T (EnGem)

Supply and fixing surface mounted LED batten fitting 18/20 Watt, with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire, complete all as specified and directed by Engineer-in-Charge. Make : Philips / Wipro / Osram

Supply and fixing surface mounted LED batten fitting 10/12 Watt , with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire, complete all as specified and directed by Engineer-in-Charge. Make : Philips/ wipro/ crompton

Supply & Fixing MCB (DB) SPN 8 way double door 415 V made of sheet metal enclosure for MCB's as incomming and SPN/SP MCB as outgoing, complete all as specified and directed by Engineer-in-Charge. Make: Hager / Legrand/ schneider

Supply & Fixing MCB SPN pole 240 volt C curve 10 KA, ISI marked as per IS/IEC 60898-1 2002 of 40/63 Amps capacity IP 20, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MCB SP 240 volt C curve 10 KA, ISI marked as per IS/IEC 60898-1 2002 of 6/32 Amps capacity IP 20, complete all as specified and directed by Engineer-in-Charge.

Material & labour for submain wiring 2 X 2.5 Sqmm + 1 X 2.5 Sqmm in existing surface/ Wall using IS:694- 1990 marked 1.1 kV grade single core HR-FR flexible cable having multi- drawn thin strands of electrolytic copper conductors and insulation for phase & neutral and earth continuity conductor connecting to earth dolly, drawn in medium grade non-metallic PVC conduit not less than 25 mm dia., colour-coded and making good of disturbed surfaces of wall/ceiling/floor complete all as specified and directed by Engineer-in-Charge. NOTE: 02 runs of phase & neutral conductors, 01 run of earth continuity conductor and 01 run of concealed conduit shall be measured as one length.

Supply & fixing in Wall mounted fans complete with blades, and accessories, 1 Phase, 230 V, 50 Hz, AC, 450 mm sweep. including Nut, Bolt, Clamp, complete all as specified and directed by Engineer-in-Charge. Make: Bajaj/Havells/khaitan/ Crompton

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with inbuilt air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 Tr, complete all as specified and directed by Engineer-in-Charge. Make: Voltas/Blue Star/ Hitachi

Supply and fixing Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA, complete all as specified and directed by Engineer-in-Charge.

JAY BHARAT METAL SUPPLIERS

Harsh Infrastructure

M/S. P.M GODHANIYA