Construction of Additional Hostel Accommodation for Nurshing students at Zonal Hospital Mandi Distt.

Amount

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering and lift up to any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) layers when required into plinth sides of foundations consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals in:-

Foundation, footings bases of columns etc. and mass concrete including carriage of materials with in all leads, lifts and other incidentals

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto any thickness upto floor all level including carriage of materials with in all leads, lifts and other incidentals

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses , plinth and string courses and the like including carriage of materials with in all leads, lifts and other incidentals

Columns, pillars, posts and struts square rectangular or polygonal in plan upto floor all level including carriage of materials with in all leads, lifts and other incidentals

Beams, cantilevers, girders and lintels, sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height upto floor all level including carriage of materials with in all leads, lifts and other incidentals

Stair cases with slopping or stepped soffits excluding landings upto floor all level including carriage of materials with in all leads, lifts and other incidentals

Edges of slabs and breaks in floors and walls in any width upto floor all level including carriage of materials with in all leads, lifts and other incidentals

Providing and laying 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (forty millimetre nominal size) and curing complete excluding form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying reinforced cement concrete design mix M-25 (twenty five) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work. The mix shall be designed as per requirement of I.S. code and P.W.D. specification. The design mix will be got approved from the Engineer -In - Charge prior to the casting-1 theoritical consumption of cement for the item shall be worked out as per approved design mix as per code including carriage of materials with in all leads, lifts and other incidentals in:-

Foundation, footings bases of columns etc. and mass concrete including carriage of materials with in all leads, lifts and other incidentals

Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Vertical surface such as walls (any thickness) but not less than exceeding 0.10 (zero point one zero) metre thickness partitions and the like including attached pilasters, buttresses , plinth and string courses and the like. Above plinth level upto floor all level including carriage of materials with in all leads, lifts and other incidentals

Columns, pillars, posts and struts square rectangular polygonal up to floor all level including carriage of materials with in all leads, lifts and other incidentals

Stair cases (except spiral stair cases) excluding landing but including preparing of surface and finishing of nosing upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying reinforced cement concrete design mix M-20 (twenty ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work. The mix shall be designed as per requirement of I.S. code and P.W.D. specification. The design mix will be got approved from the Engineer -In - Charge prior to the casting. The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code in string courses coping bed plates anchor blocks plain windows sills and the like upto floor all level including carriage of materials with in all leads, lifts and other incidentals in:-

Sloping surface such as wall any thickness including attached pilasters, buttress, plinth and string courses etc. from top of foundation upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Suspended floors, roofs, landing, shelves and their supports, balconies, beams, girders, bressumers and cantilever upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position including cost of binding wire complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Random rubble masonry (un-coursed/ brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) at plinth level including racking out joints in cement mortar 1: 6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying 20mm (Twenty millimetre) thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6 (One Cement : Six sand) and concrete backing with cement concrete 1:3:6 (one cement:three sand:six graded stone aggregate 20mm nominal size) on inner face of walls including centring, shuttering and propping complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Precast concrete block masonry in partition wall 10cm (ten centimetre) thick with solid blocks of approval size including quoin blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 40mm (forty millimetre) and down gauge in cement mortar 1:6 (one cement : six sand) in all floors including carriage of materials with in all leads, lifts and other incidentals.

Precast concrete block masonry (including quoin blocks, jamb blocks, closer etc.) with solid concrete blocks of approved size made of cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 40mm and down gauge in cement mortar 1:6 (one cement : six sand) foundation plinth and super structure upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Half Brick masonry in second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:4 ( one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

Providing 2nd Second class deodar wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood shutters, panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows and including black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors, windows ,clerestory windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. plain grills of required pattern including carriage of materials with in all leads, lifts and other incidentals.

Providing 40x3mm (Forty into three millimeter) flat iron hold fast 40cm (Forty centimeter) long including fixing to frame with 10mm (Ten millimeter) diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30x10x15cm(Thirty into ten into fifteen centimeter) 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (Twenty millimeter nominal size) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing second class Indian Teak wood 75x60mm (seventy five into sixty millimetre) rounded hand rails in straight length complete as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of materials with in all leads, lifts and other incidentals.

300x16mm (three hundred into sixteen millimetre)

250x16mm (two hundred fifty into sixteen millimetre)

Providing and fixing aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

300x10mm (three hundred millimetre into ten millimetre).

250x10mm (two hundred fifty millimetre into ten millimetre).

200x10mm (two hundred millimetre into ten millimetre).

150x10mm (one hundred fifty millimetre into ten millimetre).

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

125mm (one hundred twenty five millimetre).

100mm (one hundred millimetre).

75mm (seventy five millimetre).

Providing and fixing bright finished brass 100mm (one hundred millimetre) morice latch with one dead bolt and a pair of levers, handles with necessary screws etc. complete (Indian make of approved quality) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing bright finished or /and black enameled iron (Helical door spring 150mm) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etc. complete) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 25mm (twenty five millimetre) dia curtain rod with brackets plugsetc 1st class deodar wood including carriage of materials with in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.

Providing wood work in frames of false ceiling partitions etc. sawn and put up in portion 2nd class deodar wood including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 12mm thick prelaminated board bwp phenol bonded exterior/ interior grade both sides partitions with but jointing and nails (Frame work and cover fillets to be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing plain square edged cover fillets (beading) 40mmx12mm (forty millimetre into twelve millimetre) section with wood screws in ceiling and lining including mitring at junctions 1st class Indian Teak wood including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing full body vitrified tiles in matt finish of size 600mmx 600mm (six hundred millimetre into six hundred millimetre) of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (1cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 10mm (ten millimetre) thick full body vitrified tiles in matt finish of size 600mmx 600mm (six hundred millimetre into six hundred millimetre) of approved shade and colour in Skirting 10mm (ten millimetre) (average) thickness base of cement 12mm (twelve millimetre) thick cement mortar 1:3 (1cement : 3 sand) jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 8mm (eight millimetre) thick Anti Skid Ceramic tile 300x300mm (three hundred into three hundred millimetre) of approved shade and colour in flooring, treads of steps and landings laid over 8mm (eight millimetre) thick cement mortar 1:3 (1cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required upto all floorlevel including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying granite stone in flooring 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement : three sand) laid over and jointed with cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete 20mm (Twenty millimetre) thick upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Kota stone slab 25mm (twenty five millimetre) thick in flooring on 20mm (twenty millimetre) (average) thick 55x55 cm (fifty five into fifty five centimetre) size base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals complete in all respect.

Providing and laying marble work (Table rubbed and polished) in flooring 20mm (Twenty millimetre) thick base in cement mortar 1:3 (One cement : three sand) including jointing with cement mortar 1:2 (One white cement : two marble dust) with an admixture of pigment to match the shade of the marble, 20mm (Twenty millimetre) thick Baroda Green marble as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 0.60mm (zero point sixty millimetre) thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating i/c fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with pre-painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (Zero point sixty millimetre) thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 (Twenty) microns over 5 (five) microns primer coating + back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing valley 90 cm (ninety centimetre) overall 0.60mm (Zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyester of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 0.60mm (zero point six zero millimetre) thick pre-painted sheet flushing made of cold rolled steel coil having a puff depth of 50mm rock wool and interior skinwith of 0.50mm prepainted steel sheet steel frames are to be painted of approved shade i/c fixing and screw prepainted iron J or L hooks, bolts and nuts 6mm dia metre with pre-painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC (D-plast) rain water pipes of working pressure not less than 4.5Kg (four point five kilogram)/ square metre including filling the joints with approved adhesive complete 100mm (hundred millimetre) dia pipes including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces 150/100mm (one hundred fifty/one hundred millimetre) dia PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15cm (fifteen centimetre) wide 45cm (forty five centimetre) over all semicircular plain G.I. sheet gutter with iron brackets 40x3mm (forty millimetre into three millimetre) size bolts and nuts and washers etc. including making necessary connection with rain water pipe complete as per design 0.63mm (Zero point sixty three millimetre) thick sheet including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. BP sheet 1.66mm (One point sixty six millimetre) to 2mm (Two millimetre) thick in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work sheet be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in beams, joists, channels, angles, tees, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters purlins connected to common rafters and the like including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railing, brackets and similar works including carriage of materials with in all leads, lifts and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood priming pink including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint other than white including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of oil dirt- dust and other foreign mater (Enamel paint other than white) including carriage of materials with in all leads, lifts and other incidentals.

6mm cement plaster to ceiling in cement mortar 1: 3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

15mm (Fifteen millimeter) cement plaster in single coat on the rough side of brick/concrete /stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth in cement mortar 1:3 (one cement : three sand) complete as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer including carriage of materials with in all leads, lifts and other incidentals.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt,dust and other foreign matter etc. including sand paper smooth complete including carriage of materials with in all leads , lifts and other incidentals.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete /stone plastered wall surfaces to give an even shade including thorougly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for matling the surface within all leads, lifts and carriage of materials and other incidentals as per direction of Engineer-in-charge

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated bed dry brick/stone aggregate 40mm (forty millimetre) nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials with in all leads, lifts and other incidentals.

Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 ( one cement : three sand : six graded stone aggregate 20mm nominal size mechanically mix finishing surface of concrete smooth including carriage of materials with in all leads, lifts and other incidentals.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22 cm (fifteen centimetre into twenty two centimetre) in cement mortar 1 : 6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying of 10cm (ten centimetre) (ten centimetre) cement concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size and finished with a floating coat of neat cement and curing complete as per standard design including carriage of materials with in all leads, lifts and other incidentals.

Excavation in drain and channels etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing watering /dewatering including dressing of sides and bed and disposing of excavated earth upto any lead and lifts disposed earth to be leveled and neatly dressed including carriage of materials with in all leads, lifts and other incidentals.

Supplying and fixing cast iron cover with frame for man holes 500mm (five hundred millimetre) internal diametre C.I. cover (medium duty) weight of cover with frame116Kg (one hundred sixteen kilogram) complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 200mm ( two hundred millimetre) wide cast iron rungs with chequered of ribbed non slip surface including fixing in manholes with 200mm x 200mm x 100 mm ( two hundred millimetre into two hundred millimetre into one hundred millimetre) cement concrete 1:3:6 (one cement : three sand : six graded stone agreegate 20mm nominal size) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing grill jali panel on chamber including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china wash down water closet (European Type W.C. Pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (sheet and over to be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Ordinary closet

Providing and fixing viterous China wash, down water closet (Angle Indian Universal closet) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and coveto be paid for separately. including carriage of materials within all leads and lifts

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cove including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting flat back complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

550x400 mm (five hundred fifty into four hundred millimetre) size.

Providing and fixing stainless steel kitchen sink size 610 X 460 X 200mm(Six hundred ten into four hundred sixty into two hundred millimeter) of approved standard ISI make with drain based and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P. brass chain 50cm (fifty centimetre) long and rubber plugs for sink or wash basin 32mm (thirty two millimetre) dia size complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre) diametre C.P. Brass waste for wash basin or sink including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre) diametre M.I. union for wash basin or sink including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre) dia PVC S trap for wash basin or sink complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals..

Providing and fixing 100mm (Hundred millimetre) sand cast iron grating for gully floor or Nahni trap including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass mounted on 6mm (Six milimtre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer complete as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing 750 x 20mm (seven hundred into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass shelf with C.P. brass bracket and quard rail complete fixed to wooden plugs with C.P. brass screws as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing toilet paper holder C.P. brass complete as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P. brass bib tap with Capstan head 15mm (Fifteen millimetre) dia including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass pillar tap with capstan head complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass stop cock as complete per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing brass fullway valve with wheel including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) nominal bore

20mm (twenty millimetre) nominal bore

Providing and fixing plytheline-Aluminium polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamps at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipe exposed on wall internal work exposed on wall including carriage of materials with in all leads, lifts and other incidentals:-

1620 (20mm (twenty millimetre) O.D. pipe)

1216 (16mm (sixteen millimetre) O.D. pipe)

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals.

Equal Tees

1216 (one thousand two hundred sixteen)

1620 (one thousand six hundred twenty)

Reducing Tee 1620 (one thousand six hundred twenty) x all branches.

Female branch Tee

1216x1216x15mm (one thousand two hundred sixteen into one thousand two hundred sixteen into fifteen millimetre) thread.

Female Elbows

1216x15mm (one thousand two hundred sixteen into fifteen millimetre) thread.

Male thread connector

1216x15mm (one thousand two hundred sixteen into fifteen millimetre) thread.

1620x15mm (one thousand six hundred twenty into fifteen millimetre) thread.

Female thread connector

1216x15mm (one thousand two hundred sixteen into fifteen millimetre) thread.

1620x15mm (one thousand six hundred twenty into fifteen millimetre) thread.

Couplers

1216 (one thousand two hundred sixteen)

1620 (one thousand six hundred twenty)

Reducers

1620x1216mm (one thousand six hundred twenty into one thousand two hundred sixteen)

2025x1216mm (two thousand twenty five into one thousand two hundred sixteen)

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection and 15mm (fifteen millimeter) nominal bore brass ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level net capacity tank complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

1000 (One thousand) litres.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110mm X 75mm (One hundred ten millimetre into seventy five millimetre) including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.

150mm (one hunderd fifty millimetre) dia.

110mm (one hunderd ten millimetre) dia.

Providing and fixing PVC single equal branch with oval access door ISI marked insertion rubber washer 3mm (three millimetre) thick, bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

150mm (one hunderd fifty millimetre) dia.

110mm (one hunderd ten millimetre) dia.

Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

150mm (one hunderd fifty millimetre) dia.

110mm (one hunderd ten millimetre) dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

150mm (one hunderd fifty millimetre) dia.

110mm (one hunderd ten millimetre) dia.

Providing and fixing PVC plain bends ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

150mm (one hunderd fifty millimetre) dia.

110mm (one hunderd ten millimetre) dia.

Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 110 mm (one hundred ten millimetre) dia. including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing PTMT Colored /white high density polyethylene/poly propylene 10 (ten) liters capacity (full flush) European standard control low level flushing cistern with fitting with a pair of brackets with fittings such as lead valve, syphon, 15mm (fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty millimetre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT Jet spray of approved quality and colour with one metre tube including carriage of materials with in all leads, lifts and other incidentals.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with common brunt clay building bricks in cement mortar 1:5 (one cement: five sand) C.I. Cover with frame (light duty) 355mm X 610mm (three hundred fifty five millimetre into six hundred ten millimetre) internal dimensions total weight of cover with frame to be not less than 38 (thirty eight) kg (weight of cover 23 (twenty three) kg. and weight of frame 15 (fifteen) kg) RCC top slab with 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:5:10 ( one cement : five sand : ten graded stone aggregate 40mm (forty millimetre) nominal size) inside plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 ( one cement : three sand) finished smooth with a floating coat of neat cement on wall and bed concrete etc. complete inside dimensions 455mm X 610mm X 450mm (four hundred fifty five millimetre into six hundred ten millimetre into four hundred fifty millimetre) deep single pipe line including carriage of materials with in all leads, lifts and other incidentals.

Jagdish Kumar, Govt. Contr