PROVN OF FIVE JCO/OR TOILET BLOCKS AND VEH PARKING AT MISSAMARI UNDER GE MISAMARI

Amount

Excavating in post holes each n exc 0.5 cum getting out in any type of soil or hard rock and removing excavated material to a distance n exc 50m complete.

M&L for PCC (1:4:8) type D2 with 40mm graded aggregate as in sub base and Fdn filling incl finishing, etc complete.

S&F steel work in tubular trusses conforming to IS 1161-1979 grade St-240 incl necessary welding, drilling and providing nut & bolts as required, etc complete.

S&F pre-painted galvantume aluminium zinc coating Colour coated GI based corrugated steel sheeting 0.5mm thick of any colour having tensile strength 550 Mpa fixed with self tappping screw in roof, wall etc. complete.

S&F Pre-painted galvantume aluminium zinc coating Colour coated GI based plain steel sheeting 0.5mm thick of any colour having tensile strength 550 Mpa fixed with self tappping screw in roof, well etc. complete.

Preparation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide etc complete.

Surface excavation n.exc 30cm deep and avg 15 cm deep in soft/loose soil etc complete.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in soft/loose soil, complete all as specified and directed by Engr –in-Charge.

Removing of excavated material (soil) to a distance exc 50mtr but n. exc. 500mtr and depositing where directed etc complete all as specified and directed.

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Hardcore of gauge exc. 63mm but n. exc. 100mm deposited spread and levelled in layers n. exc. 15cm thick, watered and rolled and rammed to a true surface with broken stone or boulders as in hardstanding etc complete.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) including demolition of existing brick work where ever required etc complete.

M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete.

M&L for 15mm thick rendering on fair faces of block masonry or concrete surfaces of wall in CM (1:6), finished even and smooth without using extra cement etc complete.

M&L for 15mm thick rendering on fair faces of block masonry or concrete surfaces of wall in CM (1:4), finished even and smooth without using extra cement etc complete.

M&L for Plain cement concrete, type D-2 (1:4:8) (using 40mm graded crushed stone aggregate), as in foundation filling and mass concrete and sub base of floors etc complete.

M&L for 5mm thick rendering on fair faces of concrete surfaces of ceiling in CM (1:3), finished even and smooth without using extra cement etc complete.

75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone agg as in plinth protection finished even and smooth w/o using extra cement etc complete.

Formwork to sides and soffits of floor or roof beams, lintels, shelves with rough finished surface etc complete

Formwork to soffits of suspended slabs such as roof slabs not exceeding 200mm thick (horizontal or sloping) with rough finished surface etc complete.

TMT Bars 10 mm dia & over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

-ditto- all as per item No 22 here- in- before, but 5 to 10mm dia as in stirupps complete all as specified and directed by Engineer-in-Charge.

M&L for RCC type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in plinth beams and mass concrete etc complete all as spd.

M&L for RCC type B1,1:2:4 (using 20 mm graded crushed stone aggregate) roof Beams, cantilevers, lintels over 1.5m span complete all as spd.

M&L for RCC type B1,1:2:4 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams & columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves & the like etc complete.

M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.esc 25 cm thick etc complete.

M&L for 75 mm thick, PCC 1:4:8, type D -2 (using 40 mm graded crushed stone aggregate), as in sub base of floor’s etc complete.

M&L Non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc.incl and over 15mm thick screed bed or bedding layer of CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish etc complete.

M&L glazed ceramic coloured tiles (300x450)x7mm thick in vertical surfaces including 10 mm thick rendering in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles etc complete.

S&F vitreous china wash down water closet pan (pedestal pattern) white incl seat cover of plastic, CP jet and pipe incl necssary PVC pipe fittings etc complete.

S&F vitreous china wash hand basin, white size 550 x 400 mm incl bracket & waste coupling etc complete.

S&F PVC connection 15 mm size with PTMT nut of length 450 mm etc complete.

S&F PVC low level flushing cistern white including flush pipe suitable for IWC/EWC, 10 Lit capacity complete.

S&F in repair PVC waste pipe 32 mm bore of required length complete.

S&F Grating doom 125mm dia. with waste hole of CP (minimum weight 40 gms), complete all as specified and directed by Engr-in-Charge.

S&F Bib taps 15mm dia , chromium plated, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.

S&F Stop/ angle valves 15mm dia bore of pipe, chromium plated, fancy type, with long shank and cap (cocealed type) complete all as specified & directed by Engr-in-Charge.

S&F 15 mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F Vitreous China Urinal, Half stall type, white including Push cock, Spreader white complete all as specified.

S&F PVC (SWR) floor trap 110 mm, setting and jointing with solvent cement complete all as spd.

S&F PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as spd.

S&F PVC (SWR) pipes ,110 mm ,single socketed in any length with rubber ring joints in trenches or floor with and including necessary fittings such as bend/tee/junction/vent cowl etc complete.

S&F PVC (SWR) floor trap75 mm, setting and jointing with solvent cement complete all as spd.

S&F PVC (SWR) pipes ,75 mm ,single socketed in any length with rubber ring joints fixed in trenches or floor with and including necessary fittings such as bend/tee/junction/vent cowl etc complete.

Preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of weather coat ext grade complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of OBD over a coat of primer etc complete.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash etc complete .

M&L 15mm dia bore galvanized steel water tubing, “medium grade,” with all fittings and fixed to walls or laid in floors complete .

M&L 20mm dia bore galvanized steel water tubing, “medium grade,” with all fittings and fixed to walls or laid in floors complete .

S & F steel ventilator with top hung shutter incl hinges peg stay, glass pane, wire mesh etc complete all as specified and directed.

S&F 500 Ltr rotational moulded polyethylane water storage tank (cylinderial vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete.

S&F 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe.

S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either zixs as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete

S&F Solid PVC door frame of size 100 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS Square tube.

S&F Stainless steel butt hinges medium weight size 100mm long

S&F aluminium handles cast type anodised size 150 mm long.

S&F aluminium anodiesed barrel tower bolt of extruded section size 200 mm .

S&F sheet glass 4 mm thick orinary quality and glazing with oil putty in square n.exc. 0.50 Sqm each.

Supplying, laying and testing of 100 mm internal dia of double wall corrugated (DWC) high density polyethylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for sewage line and laid in trenches as specified in IS-16098-2013 part-2 complete all as specified and as directed.

M&L Water proofing Treatment on existing cleaned RCC Roof with the following Specifications, including taking down existing treatment complete all as specified and as directed. (a) Plain Cement Concrete 1:2:4 type BO (12.5mm graded aggregate) 25mm thick in Roof Padding after brushing with Cement Slurry @ 3.0 kg Cement per Sqm, complete. (b) Priming surfaces and applying normal treatment (for moderate conditions), using glass fibre base bitumen felt grade2 (except felt). (c) Providing APP based polymeric membrance minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven febric (with not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified. (d) Applying two coats of aluminium paint over APP based Polymeric Membrane.

M & L for 75mm thick Cement Concrete Type B1 1:2:4 (Using 20mm graded aggregate) as in flooring finishing cement concrete surface even and smooth w/o using extra cement complete.

M & L for ruberised finish precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment laid over and including 25mm avg th sand coushning all as specified.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Concealed Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22 mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

-ditto- all as per item No 65 here in before but for one Ceiling fan / Exhaust Fan point controlled by one, one way switch and regulator

S & F switch piano single pole flush type 5 amps, 230 volts.complete all as specified and directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/squareblockscomplete all as specified and directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Polycab.

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar , 4 way double door open able complete.

S & F MCB Double Pole 20 Amps 240/415 Volt, confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed.Make- L&T, Cat No: BB20320B or equivalent in Schinder/ Legrand.

S & F MCB SP, 240 volts, 6A Amps 50 Hz ,confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed. Make -L&T,Model No-BB10060B/Schinder/ Legrand.

S & F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as directed by Engineer-in-Charge.Model -REGALBATTENT8UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Polycab, all as specifed and directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells,Model No - ENDURAPEARLSL25WLED757SASYTOPCMP Or Equivalent in CG and Polycab all as specified and directed.

Supply & Laying LT UG XLPE cable of size 2 core x 10 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed.

Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified.

Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable with 8cm thick before laying of cable & 15cm thick after laying of cable etc complete all as specified. NOTE :- Punned thickness of 18cm only will be measured and paid.

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore complete all as specified and directed .

S&F S&F heavy duty exhaust fan 300 mm sweep MS Body, 3 wing 1400 rpm, single phase 240volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type Make : Orient or Equivalent in USHA/ Havells.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 40 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F PP-R Gate Valves (Brass Insert) 32mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed.

S&F PP-R Gate Valves (Brass Insert) 50 mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed.

Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80 mm x 40 mm dia all as specified and directed by Engr-in - charge

M&L for connection pieces for inserting 63 mm PPR pipe into 80 mm distribution mains all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 40 mm x 32 mm including cutting and making fusion joint etc all as specified and directed.

M/S B.B. Singh Contractor

M/S Krishna Construction Co.

bkgeneralstores

BEE KAAY TRADERS

Markson

M/S Yadav Corporation