Provn of GD Room with Att toilets and Bathroom at Arty Barrier, OTM Accn for Women Mil Police Pers at UK Sub Area Pro unit, drainage system at RIMC and Acrylic barrier shield supported with stand for MOs at MH under GE Dehradun

Amount

Surface excavation n exc 30cm deep averaging 15cm deep in any type of soil and getting out complete all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in any type of soil complete all as specified and as directed

All as per item No 02.00 here in above but exc 1.5m and n. exc 3.0 m in depth complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks built in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

M&L for treating the bottom and sides of excavation at the rate of 5 ltrs of antitermite emulsion per Sqm of surface area complete all as specified and directed by Engr-in-Charge.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of antitermite emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of antitermite emulsion per square metre of surface complete all as specified and as directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of antitermite emulsion per square metre of surface area complete all as specified and as directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of antitermite emulsion per metre of the perimeter wall complete all as specified and as directed.

S&F factory made precast RCC U drain with cover of size 500x420x420x of 50mm thick of M-30 design mix complete all as specified and directed. Make : Tulip/ NTC

Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre complete all as specified and directed.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded stone aggregate) as in foundation, footing, plinth beams, bases for column etc, complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. (Note :- Reinforcement & formwork shall be measured and paid for separately)

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and structures etc, complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregate) as in beams, lintel over 1.5m span etc, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as directed by Engineer-in-charge.

M&L for cement concrete 1:2:4 type B-0 40mm thick in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for finished surface complete all as specified

M&L for steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.

M&L for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for finished surface complete all as specified

M & L for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M&L for formwork to edges of slabs exc 10cm but n exc 20cm wide for fair finished surfaces of concrete etc complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .

All as per item No 26.00 here in above but 5mm dia and over in stirrups, spacers and binders complete all as specified and directed.

M&L for spreading and levelling excavated earth in layers n exc 25 cm thick and well ramming including including watering as required complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound onfair faces of brick/concrete surfaces rendering is to be finished even and fair without using extra cement . (WPC will be measured and paid separately) complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick with CM (1:3) on or concrete surfaces finished even and smooth as in ceiling complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new plaster surface of wall and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of wall over a coat of primer complete all as specifed and directed.

M&L for preparing new plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for plastering on roof tops 15mm thick in cement mortar 1:4 mixed with water proofing compound finished even and smooth using extra cement . (WPC will be measured and paid separately) complete all as specified and directed.

M&L sand filling under floors/ paving including spreading levelling watering and consolidation complete all as specified and directed by Engr-in-charge.

M&L for coloured Pre-polished chequered cement concrete tiles 20cmx20cmx25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bedding layer (1:6) complete all as specified and directed.

M&L for hard core of broken bricks of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor for lay floor finish complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in floor for laying floor finishing the cement concrete even and rough to receive the floor tiles complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection, finished even and fair without using extra cement. The plinth protection shall be laid in alternate bays n exc 2 sqm with 10mm wide joints filled with bitumen mastic comprising of 1 part of hot bitumen 85/25 grade and 3 parts sand all by weight complete all as specified.

M&L for 600mm x600mm size machine cut Kota stone slab 20 to 25 mm thick, as in flooring. over & including 15mm thick bedding layer in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, rounding of edges and polishing complete all as specified and directed.

All as per item No 43.00 here in above but in skirting/dados/ risers complete all as specified and directed.

M&L pressed steel frames for doors with one or more rebates, including fixing lugs hinges, lock strike plate etc, complete all as specified, size of frame 125mmx60mm Complete all as specified and directed.

M&L for 35mm thick of 2nd class hard wood plain framed factory made panelled shutters (any number of pannel) with pannel ) with panel of 12mm thick veneered particle boards with commercial faces vineers. Complete incl fixed to chowkhat the size of rails and styles as per IS 1003 or as described in SSR Part-I kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S&F for 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24(a); supplied and fitted to chowkhats complete all as specified and directed.

S & F Solid PVC door frame of size 50 mm X95 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F Factory made solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in the frame at site as per specification complete all as specified and as directed by Engr-in-Charge.

S&F 200mm long stainless steel 204 grade bright finished tower bolt of extruted section complete all as specified and directed.

S&F stainless steel 100mm long butt hinges for PVC door shutters and frames complete all as specified and directed.

S&F stainless steel 204 grade bright finished handles type of size 150mm complete all as specified and directed.

S&F factory fabricated steel windows with side hung shutters including box type hinges with steel handles, steel peg stays complete with glazing bars dovetailed or welded,complete all as specified and directed. (Glazing shall be measured separately)

S&F factory fabricated steel windows with side hing shutters including box type hinges with steel handles,steel peg stays complete without glazing bars, as in fly proof shutters, complete all as specified and directed. (wire gauge shall be measured separately)

S&F of mild steel framed work such as grills, gratings etc, with ends of bars shouldered and /or riveted, or forged into pikes, framed guard bars, barred iron doors, ladders, framed balsters, walk ways, railing, frame work of water tanks and similar work conforming to Fe- 290 Gde E-165 complete all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S&F Stainless steel wire cloth. 0.56mm nominal dia of wire with 304 grade nickle and average width of aperture 1.40mm and fixed with stainless steel wire staples all as directed by Engineer- in -Charge.

S & F 16 mm dia Sliding door bolts,safety type stainless steel 204 grade bright finishd with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded sectina and fixing bolt and sliding bolts of extruded sections, length of bolt sliding 250 mm long complete all as specified and directed by Engineer-in-Charge

S & F MS helical door spring 300mm complete all as specified and directed by Engineer-in-Charge.

M & L for mild steel work in bands, straps, holdfast, hook and pintle hinges confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge

M&L for Preparing new untreated wood/wood based surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of on steel surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M & L for rendering(screed bed or bedding when the concrete is still green) 15 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth using extra cement mixed with water liquid proofing admixture as per manufacturer's instruction etc complete all as specified and directed by Engineer-in-Charge( Note :- WPC shall be measured and paid separately)

Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge

M&L water proofing treatment on roof slab described as under:- (a) Surface preparation with Asian smart care mortar and GP grout mortar and treating of construction joints, bore packing, filling of honey combs with polymer modified mortar (Cement ; Sand : smart care multipurpose polymer of Asian Paints or equivalent product of BASF/Fosroc) (b) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of BASF/Fosroc) on the cleaned surface for bonding of PU magnum with the existing concrete surface.

Item No 65.00 (Contd/--)… (c) Supplying, providing and applying water proofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied Pure PU coating or equivalent product of BASF/Fosroc) including all necessary surface preparation, coving using smart care multi purpose polymer, water pond test, etc. complete as per manufacturer's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of min 1mm. The coating shall have dual combination of min 250% elongation and >2.5mpa tensile strength. Execution to be done with authorised applicator of the manufacturer using airless spray technology with 7.5HP power and max working pressure of 6750 PSI and company back guarantee to be given by the contractor. Work will be executed in smart assurance system complete all as specified and directed.

M & L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engineer-in-Charge.

M & L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engineer-in-Charge.

S & F for 100 mm bore cast iron soil, waste and vent pipes,(spun pipes as per IS 3989) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and directed by Engineer-in-Charge

S & F for 75 mm bore cast iron soil, waste and vent pipes,(spun pipes as per IS 3989) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and directed by Engineer-in-Charge

S & F cast iron cowls 75 mm complete all as specified and directed by Engineer-in-Charge

S & F for 100 mm bore cast iron (as per IS 3989)branch piece , single (equal or unequal) ordinay or inverted (spigot or socket type ) or with parallel branches complete all as specified and directed by Engineer-in-Charge

S & F for 75 mm bore outlet cast floor trap (as per IS 3989)with gratings including jointing to waste pipe fixed in cement concrete typeB-1 (1:2:4) etc complete all as specified and directed by Engineer-in Charge

S & F for 75 mm bore cast iron bends (as per IS 3989)of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge

S & F of vitreous china white glazed orrisa pattern WC size580 x 440mm complete includcing CI P or S trap but excluding & flush pipe, flushing cistrern complete all as specified and directed by Engineer-in-Charge.

S&F vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat closed pattern with flat bottom and cover with PVC hing device, fixing bolt for pedestal pattern complete all as specfied and directed.

S&F PVC Low level flushing cistern 8 ltr capacity dual type incl internal fittings,sypons,handle,bend etc with PVC flushing bend complete complete all as specified and directed by Engineer-in-Charge.

S & F wash hand basin vitreous china white glazed flat back, size 550 x 400 mm, including pedestal, CP waste coupling and waste pipe brackets and cutting for and pinning in ends of brackets and etc complete in all respect complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China bowl Urinal half stall of size 465x355x265mm White (minimum) with waste coupling, waste pipe and CP spreader complete all as specified

S&F PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts and washers etc complete all as specified and directed by Engineer-in-Charge.

S&F 15mm dia bib tap, long body type chromium plated brass, fancy type with crutch or butterfly handle, screwed down complete all as specified and as directed by Engr-in-charge. Make : Jaquar ESSCO DLX 526/MARC ES 526/Perl MAR 078

S&F 15mm dia stop valves/angle valve/ cast copper alloy chromium plated brass,fancy type, high pressure with crutch or butterfly handle screwed down complete all as specified and as directed by Engr-in-charge. Make: Jaquar /Pearl MAR 075

S&F 15mm dia concealed stop cock cast copper alloy chromium plated brass,fancy type, high pressure with crutch or butterfly handle screwed down complete all as specified and as directed by Engr-in-charge. Make: Jaquar/ Pearl

S&F CP brass fancy type Pillar Tap complete all as specified and direcated. Make- ESSCO MQT-508 KN or Equvalent in Jaquar or pearl

S&F CP brass shower rose 15mm dia , 125mm dia complete all as specified and directed.

S&F brass CP tabular towel rail 20mm dia D type 60cm long between flanges complete all as specified and as directed by Engr-in-charge.

S&F 500 litres capacity Rotational moulded polythylene water storage tanks (cylinderical vertical with close top) three layer external white hoisted and fixed in position including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and tank nipple complete all as specified and as directed by Engr-in-charge.

S&F 1000 litres capacity Rotational moulded polythylene water storage tanks (cylinderical vertical with close top) three layer external white hoisted and fixed in position including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and tank nipple complete all as specified and as directed by Engr-in-charge.

S & F 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

M & L for cement concrete (1:2:4 ) type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement and necessary form work, complete. (Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately.)

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stop ends etc complete all as specified and directed.

M&L 150mm internal dia salt glazed stoneware drain pipe Gde 'A', laid in trenches and jointed in cement & sand mortar (1:1), complete all as specified and directed.

M&L for concrete in PCC (1:3:6) type C-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed .

M&L precast RCC (1:2:4) type B1(using 20 mm graded crushed stone aggregate) as in landings, man hole cover slab, chajjas etc.and similar articles with plain faces set in CM (1:6) complete all as specified and directed.

M& L for LLDPE septic tank for 10 user designed to carry sewage and sullage water, excavation in any type soil, PCC 1:4:8, below foundation, vent shaft, cnnection etc complete.

Provn of 25 users septic tanks including excavation and earthwork in any type of soil , PCC foundation, brick work, RCC cover slab, precast RCC man hole cover with angle iron frame vent shaft and sludge chambers complete all as shown on TD drawing, specified and directed.

M&L for construction of soakage well, internal dia 1.80M dia & depth 3.00M including excavation and earthwork in any type of soil ,brick work etc,complete all as shown on TD drawing, specified and directed.

M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over screed bed (1:6) 15mm thick set and jointed in neat with cement slurry and pointed in white or coloured cement to match to match complete all as specified.

M&L for coloured digital ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM (1:3) complete all as specified.

Cutting to existing steel tubing alteration 15mm bore GI tubing complete all as specified and directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

S&F CP Health Faucet with 1 mtr metalic expandable tube & hook complete all as specified and directed.

S&F in repairs CP brass Soap dish fixed to wall with chromium plated, brass screwed and cup washer. Make :- Jaquar/Prayas /Cera.

S&F square grating with doom round openable type hinge arrangement 100m dia of PTMT (minimum weight 25gms)

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F of steel window or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F 4mm thick sheet glass frosted, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and as directed. Make : ECHON/Kumar Tech/Sintex

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and as directed by Engr-in-Charge. Make : ECHON/Kumar Tech/Sintex

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

M&L for pre-polished pavement coloured tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F powder coated aluminium anodised door with frame, shutter, following accessories and glazing 4.8 mm thick retro reflected glass, in upper portion and particle board interior grade in bottom portion, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary, section of aluminium door shall be of following sizes:- Frame: 100x44x1.20 mm thick with rawl plug Middle lock rail: 85x44x1.20 mm thick Bottom rail : 150x44x1.20mm thick Top rail : 85x44x1.20 mm thick style : 75x44x1.20 mm thick glazing bead : 0.70 mm thick Aluminium handle 'D' type : 150 mm Aluminium tower bolt 9.9 mm dia shoot 200 mm long Mortice lock: 100 mm 4 lever Aluminium stopper cleat, brass stainless steel hinges 100 mm long.

S&F powder coated aluminium anodised barrier shield with frame/Stand (fixed/openable type) shutter and glazing with transparent / coloured acrylic sheet 4-5 mm thick, sheet fixed rubber gasket with aluminium glazing clips of following sizes:- Frame of vertical/ horizontal section : 44.5x44.5x1.22 mm Bottom section : 112x44.5x1.22 mm thick complete all as specified and directed by Engr-in-Charge.

S & F false ceiling at all hieghts with semi perforated 12 mm thick micro tegular edged GRC ( Glass Fibre Rienforceed Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and patterns , having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225;1987, non combustible as per BS 476 (part4)-1970 and light code description unit rate no. 429 SUB HEAD; 26.0 NEW TECHNOLOGIES AND MATERIALS reflactance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both sides) comprising of main- T of size 15x32 mm of length 3000 mm.

Item No. 117.00 Contd/….cross -T of size 15x32 mm of length 1200mm and secondary intermediate cross -T of size 15x32 mm of length 600 mm to form grid module of size 600x600mm, suspended from cieling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8 mm outer diameter M-6 dash fasteners , 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center to center and 40mm long dry wall wood scres. the work shall be carried out as per specifications, drawing and as per direction of Engineer-in-charge

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed steel juction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified and directed by Engr-in-charge for the following.

(a) One light / exhaust fan point controlled by one-one way switch.

(d) One three pin 5 Amp socket on same board with other switches.

(c) One three pin 5 Amp socket on independent board.

All as per item No.118.00 here in above but with 2.5 Sqmm. (nominal area) wire/cable for phase and neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable, FRLS 1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

S&F switch piano one way flush type 5/6 Amp SP 250 Volt AC complete all as specified & directed. Make: Anchor/Havells/HPL

S&F switch piano one way flush type 15 Amp SP 250 Volt AC complete all as specified & directed. Make: Anchor/Havells/HPL

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed. Make: Anchor/Havells/HPL

S&F socket outlet 2-in1,3 pin 5 and 15 Amp flush type 250V AC complete all as specified & directed. Make: Anchor/Havells/HPL

S&F Bell push flush, flush type 5 Amp SP 250 Volt AC complete all as specified & directed.

S&F Bell Ding dong 250V AC complete all as specified & directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete . Make: Anchor/Havells/HPL

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC.

S&F lamp holder PVC/polycarbonate type with LED lamp 7 watt retrofit complete all as specified & directed.

S&F wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 4000K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make:Wipro Cat part No LL20-281-XXX-65AL1/ Philips cat part No BN021C LED20S PSU CWGR S2/Havells Cat No ENDURA LINEARNEOBS20W LED840SPCWH.

S&F energy saving Bulk head luminaire with opal diffuser with and including retrofit LED lamp 10 watts complete all as specified and directed by Engr-in-charge. Make : CG part No LBHP-10-CDL/ Philips WT 140W LED 7S CW PSU S1PC/ /Havells ENDURA RUGBYNEO N / MEPRO BCL 23 PLAIN

S & F decorative ultra slim LED tube light fitting box type extruded alluminium body with poly carbonate deffuser all in one single phase 20/22 Watts pre-wired all accessories.complete all as directed and specified by Engr in charge Make-Havells/Wipro/Crompton.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Havells Cat No E-Lite Pride LHEXBLP7IN1W009 or eqvt in Philips/Wipro

Supply and fixing New generation energy saving and environmental friendly long life LED Street light luminaire Endura Pearl Neo made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 with separate surge protection 5KA, 40 Watts or near higher size with making all arrangement for fixing light fitting such as replacement of GI pipe bracket made of 40 mm bore medium grade pipe made to shape of 1200 of 70 cm and 50 cm to a overall length of 1.2 mtr for fixing of street light fitting including MS clamps of size 32 x 3 mm flat iron, nuts, bolts and washers of required size painting complete with all necessary electric connection etc all as specified and directed complete all as specified and directed Make : Havells cat part No ENDURAPEARLNEOSL40WLED757PASYTOPC/CG Cat No LSTP-45-CDL / Philips Cat No BRP046 LED 36 CW MR S1 PSU GR /Greenstar DSS 40.

S&F Ceiling fan1200mm sweep 65 watt white coloured, single phase 230V, including connecting with three core 23/0076 copper wire from ceiling rose to fan connector complete with new hooks 50 X 6 of MS plate made to suitable shape and welded with truss adjusting necessary fan rod, length as per site requirement after necessary threading/cutting/drilling holes as required at site complete all as specified and directed by Engineer-in-charge.Make : Crompton Model Mount Breeze Deco/Orient Model Summer pride/cool /Havells Model SS390.

Supply & fix Double ball bearing motor, Heavy duty exhaust fans totally enclosed, Rust proof body & blades, Aluminium pressure die cast, Dynamically balanced blades for vibration free & Noiseless operation, AC single phase, 6 pole power input 55 or higher wattage, 900 RPM, 230/ 240 V of size 300 mm sweep with provision of suitable louver & 3 core white flexible multistranded copper conductor 23/0.0076 from ceiling rose to fan connector complete all as specified and directed by Engineer-in-charge. Make : Havells : Turbo force 1 phase, or Crompton model EXHD300-6-1(ISI) marked or equivalent in Orient.

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door 12 way IP-43 DB's mounting flush on wall/concealed and complete all as specified and directed by Engr-in-charge. Make: Legrand/ L&T/ Indo Asian.

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door 08 way IP-43 DB's mounting flush on wall/concealed and complete all as specified and directed by Engr-in-charge. Make: Legrand/ L&T/ Indo Asian.

S&F MCB SPN 240 Volt 10 KA 40 to 63 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand/L&T/Indo Asian.

S&F MCB single pole 240 volt, 10 KA, upto 40 Amp, 'C' series confirming to IS complete all as specified and directed. Make: Legrand/L&T/Indo Asian.

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with multi stranded aluminum conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and overall PVC sheathed 1100 Volts grade, nominal cross sectional area 16 Sqmm 4 core incl lugs thimbles bottle timbles and gun metal cable glands and heat shrinkable PVC sleeves on exposed surfaces and teflon tape duly insulated complete laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/ floors/ equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge. Make : Havells/Polycab/KEI

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 16 Sqmm 2 Core. Make of cable :- Finolex, Polycab, Gloster.

M&L for sand cushioning in trenches for protection of UG cable with river bed sand laid dry in trenches before and after laying of cable, including well ramming and consolidation complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Supply and laying of GI Steel tubing light grade 40 mm (2") dia including all fitting laying in trenches or grouting/fixing in wall for protection of cable complete all as specified and directed by Engineer-in-charge

M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm. dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe medium 15 mm. bore, and water pipe 20 mm. bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 and testing on completion. (Note: (i) If the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item )

ACE BUILDERS AND CONTRACTORS

M/s Ram Chander Gupta

SARASWATI CONSTRUCTION CO

M/S C S AITHANI