Kerala

Active

Works

Civil Works - Buildings

Annual Plan-MGPLY 2025-26 Proj No. 45/26- Maintenance of Kunnankil Anganvadi no 68- General Civil Work

Local Self Government Department

Marangattupilly | Kottayam, Kerala

Amount: ₹84,597Closes: 27 Oct 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published19 Oct 2026
Closes27 Oct 2026
Bid Opening28 Oct 2026

Tender Value

₹84,597

EMD Value

₹2,115

Closing Date

27 Oct 2026, 11:00 am6d left

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

ASSISTANT ENGINEER LSGD SECTION MARANGATTUPILLY GP

Work Description

Annual Plan-MGPLY 2025-26 Proj No. 45/26- Maintenance of Kunnankil Anganvadi no 68- General Civil Work

Tender Information

Tender ID

2026_LSGD_867787_2

Reference Number

1/AE/LSGD/MGPLY/26-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Location

Marangattupilly

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredE PAYMENT FORM (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredI PACT (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredSBD (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

EMD Fee Amount

₹2,115

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

19 Oct 2026

Published

19 Oct 2026

Bid Opening

28 Oct 2026

Download Starts

19 Oct 2026

Download Ends

27 Oct 2026

Submission Starts

19 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (22 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Maintenance
1.001	15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	0.05	cum	2,129.84	₹108.62
1.002	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	50.04	sqm	170.52	₹8,532.82
1.003	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	50.04	sqm	842.14	₹42,140.69
1.004	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	16.8	metre	565.05	₹9,492.84
1.005	5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).	0.02	cum	13,442.14	₹268.84
1.006	5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	2.5	kilogram	112.43	₹281.08
1.007	5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers	0.26	sqm	762.88	₹200.64
1.008	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	0.29	sqm	369.76	₹105.38
1.009	14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)	1.85	sqm	579.74	₹1,072.52

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.60 MB

Work Item Documents

EPAYMENT.pdf

Tender Documents • 0.02 MB

Affidavit.pdf

Tender Documents • 0.09 MB

PA.pdf

Tender Documents • 0.27 MB

IPACT.pdf

Tender Documents • 0.01 MB

FormofTender.pdf

Tender Documents • 0.08 MB

45SBD.pdf

Tender Documents • 1.81 MB

BOQ_1498774.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Maintenance
1.001	15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	0.05	cum	2,129.84	₹108.62
1.002	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	50.04	sqm	170.52	₹8,532.82
1.003	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	50.04	sqm	842.14	₹42,140.69
1.004	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	16.8	metre	565.05	₹9,492.84
1.005	5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).	0.02	cum	13,442.14	₹268.84
1.006	5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	2.5	kilogram	112.43	₹281.08
1.007	5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers	0.26	sqm	762.88	₹200.64
1.008	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	0.29	sqm	369.76	₹105.38
1.009	14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)	1.85	sqm	579.74	₹1,072.52

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Maintenance

1.001

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

0.05

cum

2,129.84

₹108.62

1.002

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

50.04

sqm

170.52

₹8,532.82

1.003

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

50.04

sqm

842.14

₹42,140.69

1.004

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

16.8

metre

565.05

₹9,492.84

1.005

5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

0.02

cum

13,442.14

₹268.84

1.006

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

2.5

kilogram

112.43

₹281.08

1.007

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

0.26

sqm

762.88

₹200.64

1.008

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

0.29

sqm

369.76

₹105.38

1.009

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

1.85

sqm

579.74

₹1,072.52