SMART PERIODICAL SERVICES IN CERTAIN OTM/ OFFICES COMPLEXES AT RAIWALA MIL STN UNDER AGE (I) RAIWALA

Amount

M & L for complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent in other approved make/Brand having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed by Engr-in-Charge.

M&L waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness1 mm, of Asian Paints or equivalent over Old prepared surface of Wall/Ceiling after scrapping to prepare the surface even and smooth. Sanding of the putty surface withAsian Paints TruCare Wall Sander: L- 01/H-01 or equivalent in other approved make/brand(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour.(Step 1) Mix the putty powder by adding 40-50% water and mix it with Asian PaintsTrucare Putty mixer(Trucare Putty mixier with min 1400 W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute).(Step 2) Apply the first coat of the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine(Model: EH230 DI) or equivalant in other approved make/Brand having a DC electric motor of 3.3 KW having flow speed of max 6ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" (Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specified and directed by Engr-in-Charge.

M&L for one coat of acrylic water based alkali resistant interior grade primer to the Old Prepared surface of wall/ceiling@ 0.8 ltr(undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant in other approved make having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of Acrylic Distemper to the old Prepared surface of wall/ceiling using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer ( Asian Paints or equivalent ) with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for one coat of acrylic water based exterior grade primer to the old Prepared surface of wall/[email protected] ltr (undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spraymachine of paint application of Asian Paints Trucare Graco or equivalent in other approved make having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed by Engineer-in-Charge.

M&L for water based Premium 100% acrylic smooth exterior emulsion of approved colour to the Old Prepared surface of wall/ceiling with silicon additive, Nano Block Technology & Color stay Technology ,Excellent Dirt Pick up Resistance, Anti Algal and Anti Fade of AsianPaints Ltd or its equivalent with low VOC less than 50 , Anti Algal properties in two coats@ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints TrucareGraco or equivalant in other approved make having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint with 5 years performance warranty from Manufacture and instructions complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick , concrete or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed.

M&L for 15mm thick plastering on fair faces of brick wall in CM (1:6) surface finished even and fair complete all as specified and directed by Engineer-in-Charge.

M&L rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick plastering on fair faces of brick wall in two layers, Ist layer 10mm thick CM (1:6), and IInd layer 5mm thick CM (1:4), surface finished even and fair mixed with @ 200ml per bag WPC (liquid type) complete all as specified and directed by Engineer-in-Charge. Note:- WPC (Liquid type) shall be measured and paid separately as supply only.

Supply only WPC integral water proofing compound (Liquid type) complete all as specified and directed.

M&L for Mild sanding of fresh plaster surface using Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent in other approved make having RPM not less than 1500, sanding pad of 180-220 Grit having dia of 7"/9" to make the surface free from dust, loose plaster, salt formation by skilled labour. Filling cracks, holes, dents upto 1mm with waterproof cement based putty of average thickness1 mm, of Asian Paints or its equivalent over freshly plastered surface as a Touch Up only , to make surface smooth for coating application complete all as specified and directed by Engr-in-Charge.

M&L waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness1 mm, of Asian Paints or its equivalent in other approved make over the New plastered surface of Wall/Ceiling after scrapping to prepare the surface even and smooth. Sanding of the putty surface withAsian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour.(Step 1) Mix the putty powder by adding 40-50% water and mix it with Asian PaintsTrucare Putty mixer(Trucare Putty mixier with min 1400 W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute).(Step 2) Apply the first coat of the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine(Model: EH230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" (Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of acrylic water based alkali resistant interior grade primer to the New Plastered surface of wall/ceiling @ 0.8 ltr(undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant in other approved make/brand having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of Acrylic Distemper to the New Plastered surface of wall/ceiling using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer ( Asian Paints or equivalent ) with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of acrylic water based exterior grade primer to the New Plastered surface of wall/[email protected] ltr (undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spraymachine of paint application of Asian Paints Trucare Graco or equivalent in other approved make/Brand having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed by Engineer-in-Charge.

M&L for water based Premium 100% acrylic smooth exterior emulsion to the New Plastered surface of Wall/Ceiling approved colour with silicon additive, Nano Block Technology & Color stay Technology ,Excellent Dirt Pick up Resistance, Anti Algal and Anti Fade of AsianPaints Ltd or its equivalent with low VOC less than 50 , Anti Algal properties in two coats@ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints TrucareGraco or equivalant in other approved make/brand having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint with 5 years performance warranty from Manufacture and instructions complete all as specified and directed by Engineer-in-Charge.

M&L for acrylic polymer-modified cementitious high performance coating(two component) with high solid content , Anti Carbonation Properties , Adhesion Strength of 1.3mpa and can be used for both side waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure which can resist up to 5 bars of positive hydrostatic pressure and form Highly elastic film which provides elongation up to 200% as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge.

M&L for single component fiber reinforced polymer modified mortar Smart Care Repair Mortar with compressive strength of 50 MPA at 28 days (ASTM C 109:99), flextural strength min 6 Mpa @ 28 days and tensile strength of 2. Mpa (ASTM C 307) up to 25mm in a single coat and max thickness of 50mm @ 53 kg for 25mm thickness per sqm as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge. Note for BOQ Item No 01 to 19: Items for smart periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor through autherized applicator as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE/AGE (I). (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Rate quoted by contractor includes use of Scaffolding, trestles, ladders, cradles, euipment & machines etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc and preparation of surfaces. (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. (j) The spray machine should be of reputed manufacturer i.e Asian/Berger or other equivalent manufacturer with pro guard technology (k) Guarantee :- The contractor shall furnish a warranty certificate from approved make in favour of Garison Engineer for the efficieny of the weather proof paint for 5 yrs during the guarantee period.

sidh builders (BID ID -3497282)

shreyansh construction (BID ID -3491176)

Appar Construction & Engineers (BID ID -3491208)

TARUN ENGINEERING WORKS (BID ID -3497026)