Tender for Restoration and Rerouting of damaged 33KV Prini Palchan feeder damaged due Flash Flood during 2023 under ESD No II HPSEBL Manali on Turnkey Basis

Supply Part:-

33kV HT Line :-

Equipments and switchgear:-

Supply of 11.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-II) as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-56. (Supplied By HPSEBL)

Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any.(Supplied By HPSEBL)

" G .I Wire 6 SWG for earth wire

" A. C S.R Cond. 6/1/4.72 sqmm (Supplied By HPSEBL)

" 33 KV Disc Insulater set dead end structure (3Nos disc in each string) polymer 90KN with complete fitting. (Supplied By HPSEBL)

" 33 KV Pin Insulater ( porcelian 36kV, 10kN) (Supplied By HPSEBL)

" M S Channel iron 4200x125x65x6mm for Top x-arm

" M S Channel iron 4500x100x50x5 mm for gaurding & contineous earthwire

" Belt set MS Angle Iron (1800X65X65x6) mm each (2 No. Per Set)

" A.I. Bracing Set for Double Pole structure (2700X50X50) mm. each (2 No. Per Set)

" 33 K.V H.T Stay Set complete

" Stay wire 7/4mm (@ 10kg per stay set) (Supplied By HPSEBL)

" Danger Plate

" HT Earthing Set complete

" Barbed wire @ 4Kg per pole(Supplied By HPSEBL)

" Full Clamp

" Half Clamp

" Aluminium Paint @ 2.0 ltr per pole with X-arm

" Red oxide

" MS Nut& Bolts off size @ 4Kg per str.

Erection Part:-

33kV HT Line :-

Erection of steel tubular pole 11.00 Mtr. Long (Tripple pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)

Erection of steel tubular pole 11.00 Mtr. Long (Double pole Run Through) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)

Erection of steel tubular pole 11.00 Mtr. Long (Double pole dead end) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)

Erection of steel tubular pole 11.00 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)

Laying, stringing , sagging & binding with Insulator of ACSR rabbit conductor of size 6/1/4.72 mm (100mm2) for HT Line.

Laying, stringing , sagging & binding with Insulator of GI wire

Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)

Jumpering

Dismantlement of existing poles (Single pole)

Dismantlement of existing poles (Double pole)

Dismantlement of existing poles (triple pole)

Dismantlement of existing ACSR conductor 6/1/4.72mm

Erection of Earthing set for HT Line (Digging of pit, fixing of GI wire to the earth system & filling of pit)