REPAIR OF RANGE OFFICE AT SOGAM.

Part A Civil Work: Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

Fillingavailableexcavatedearth(excludingrock) intrenches, plinth, sidesoffoundationsetc. inlayersnotexceeding20cm indepth, consolidatingeachdeposited. layerbyrammingand watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size incl all carriages upto the site of work

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all carriagae upto the site of work

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4(1cement :2coarsesand:4graded stone aggregate 20 mm nominal size) incl all carriages upto the site of work

Centring and shuttering including strutting, propping etc and removal of form work: Walls (anythickness) includingattachedpilasters, buttresses, plinth and string courses etc..

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Dry random rubble masonry with hard stone in foundation and plinth with bond stones

12mm Cement plaster finished with a floating coat of neat cement of mix:. 1:3 (1 cement, 3 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate.

Part-B Sanitary: Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix

Providing and fixing chrome-plated (C.P.) extension nipple (size 15mmx50mm) of approvedmake and quality as per direction of Engineer incharge.

Providing and fixing 15mmnominal bore chrome-plated (C.P.)bibcockof approvedqualityconforming toIS: 8931 of approved brand Jaquar,Cera or equivalent

Providing and fixing 15mmnominal bore chrome-plated (C.P.) angle valve for basin mixer and geyser points of approvedmake conforming to IS : 8931 of approvedbrand Jaquar,Cera or equivalent brand

Providing and fixing of chrome-plated (CP) brass Double lever wall mixer with concealed shower of approved quality and approved brand Jaquar,Cera or equivalent brand

P/F soil, waste and vent pipes 1mm thick with accessories a)PVC S&S pipe (100mm dia)

P/F soil, waste and vent pipes 1mm thick with accessories b)PVC S&S pipe (75mm dia)

PVC Cowell 50mm dia

P/F PVC stay and clamps for PVC pipes a) 100mm

P/F PVC stay and clamps for PVC pipes b) 75mm

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes a) 100mm

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes b) 75mm

P/F plain bends a) 100mm

P/F plain bends b) 75 mm

P/FTee-junctionofrequireddegreewithaccessdoor, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 PVC 1mm a) 100mm

P/FTee-junctionofrequireddegreewithaccessdoor, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 PVC 1mm b) 75mm

P/F PVC connections 15mm

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line

P/F master trap

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments. etc. complete Size of tile 600x600 mm

Electrification Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor Roma plus/SSK NV/ Legrand Myline make

"Supply istallation testing and commissioning of 18 W + surface Mounted Panel light luminary fitting round se with minimum system lumen efficacy of 100 lm/W ith Pressure Die cast Aluminium Heat Sink and P.F.>0.95, THD<10% ,CCT 5700K, CRI 80.The LED with Useful lifeof 50000Hrs at L70..The Input voltage range shall be 150V to 270V .The Fixture should have Inbuilt Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India authorised lab. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips or Havel's or Wipro or H.G make

Providing and fixing 25 mm thick shutters for cupboard etc, including ISImarked M.S. pressed butt hinges bright finished of required size with necessary MDF board shutters including ISI marked nickel plated brightfinished M.S. piano hinges IS: 3818 marked with necessary screws complete:9.17.3.1 Pre laminated medium density fibre board exterior grade (Grade I)IS:14587:1998 marked one side decorative and other side balancing lamination, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand.

Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately).9.20.1 Flat pressed 3 layer particle board or graded wood particle board grade-I type-II conforming to IS” 3087 edges to be painted with polyurethane primer.

Providing and fixing bright finished brass handles with screws etc. complete :125 mm

Providing and fixing PTMT door catcher of length 72 mm and dia of 42 mm with suitable washers weighing not less than 33gms

Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of engineer-in-charge