SPECIAL REPAIR TO ADJACENT AREA AND BOUNDARY WALL OF BAKSHI PARADE GROUND AND JAT STADIUM OF JRC UNDER AGE B/R-II OF GE (WEST) BAREILLY

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC @ 3% per 50 kg of cement including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding upto of 8 mtr complete all as specified and directed. Note :- WPC shall not be paid separately for this item.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC @ 3% per 50 kg of cement newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed. Note :- WPC shall not be paid separately for this item.

M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof paint using airless spray technology of operating single spray gun and paint usage over a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and accessories for applying weather proof paint should be able to spray in hard to reach areas and penetration of paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two coats of exterior weather proof paint using Airless spray technology operating single spray gun paint usage over a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and accessories for applying weather proof paint should be able to spray in hard to reach areas and penetration of paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of plastic emulsion paint using Airless spray technology of operating single spray gun and paint usage over a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and accessories for applying plastic emulsion paint should be able to spray in hard to reach areas and penetration of paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two coats of plastic emulson paint using Airless spray technology operating single spray gun paint usage over a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and accessories for applying plastic emulsion paint should be able to spray in hard to reach areas and penetration of paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L Preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for 20mm thick Granite (Z- black colour only) machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition, wash basin platforms and flooring, skirting/ dados steps, jambs, pillars, cooking platforms, like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed and dismantling of wall tile including cement mortar bedding complete all as spd and directed.

M & L for 20-25 mm thick machine cut pre polished kota stone slab flooring laid under stairs soffits area, setting gallery and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and or 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for 20-25mm thick machine cut pre polished kota stone slab in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration using as front door steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed including dismantling of wall tile including cement mortar bedding complete all as spd and directed.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and directed

Dismatling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling framed timber scantlings 40 sq. cm and over in section, in any complete all as specified and directed.

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade Fe-410 gde st- 240 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in ground floors and, pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M & L for 75 mm plain cement concrete Type D2 (1:4:8) using 40 mm graded stone aggregate as in sub base, sub floors . Paving etc complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M & L for 10-15 mm thick vitrified out door tiles with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc set and jointed in neat cement slurry and pointed in white or coloured cement laid over 15mm thick screed bed 1:6 cement motar and hearting complete all as specified and directed.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

S&F in repairs Anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators and frame work for fixed glazing with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. Note : - Section of frame and size shall be decided by GE.

S&F in repairs powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick figured glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clipsa, frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete,incl fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of existing MS/RCC railing complete all as specifed and directed.

S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specifed and directed.

M&L in repairs framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plate or rails ,baraces ,etc.compltete drill for fixing steel sheeting or other covering door etc to be prepared for hanging or sliding with and including with hanging and higes (excluding steel sheeting or other covering ,running rails and guides.) and hanging also fastening complete conforming to FE -410 GDE E 250 complete all as specified and directed.

M&L for Vitrified double charged coloured ceramic tiles coloured 8 to10 mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and hearting complete all as specified and directed.

All as per serial item No 33 above but as in vertical surfaces of tiles i.e skirting, dado etc and rendering 10 mm thick in cement mortar 1:4, as in backing layer upto height of 2 mtr complete all as specified and directed.

M & L for non- skid ceremic plain coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes all as specified.

M&L for Glazed plain coloured ceramic tiles wall 600x300x7mm thick on vertical faces of walls including 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified.

Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 Sqm each and not exc. 4.00 Sqm including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F sheet glass 8.00 mm thick (minimum) toughened glass coloured or white as diected by GE and glazing with clips, rubber beading or fixed indendendnetly as in partition wall complete all as specified and directed

S&F sheet glass 5.50 mm thick ordinary quality and glazing with glazzing clips, rubber beading incl necessary fixing of glass as in aluminium doors frames and like complete all as specified and directed.

S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.

S&F for 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specfied and directed.

S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specfied and directed.

M & L for Plain Cement Concrete 1:3:6 type C-1(using 20 mm graded aggregate) as in bed blocks for hold fast/concrete filling in chowkhats and similar work etc complete all as specified and directed.

M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished including taking down plaster the surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

M & L formwork to sides and soffits of lintels,lintel bend, beams, columns etc finished rough surfaces of concrete complete all as specified and directed.

M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc. etc complete all as specified and directed.

M&L RCC type B 1, 1:2:4 (20mm graded agg) as in beams, cantilevers, lintels, over 1.5 m span, columns up to height of 8 mtr etc complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in chajjas and like all as specified and directed.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical, apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx 50 mm (10 mm gauge welded mesh ) & tack , securing with clips / linding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with and including mixing of water proofing compound @ 200 ml every 50 kg of cement and applying two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as spd as directed. Water proofing Compound :-Dr Fixit (Pidiproof LW+ or pidicrete URP).

Demolition of cement concrete(un-reinforced), in any position and paving n.exc. 15 cm thickness (below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in Sub base, floors, sub floors, paving, plinth protection 75 mm thickfinished even and fair including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 all as specified or as directed.

S&F in repairs Vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x77CM / 65x35x76 complete, including connection to drain pipe etc complete all as specified and directed. Make:- Kerovit Cat Part No: INSIGNIS KS710, Hindware Cat part No.- 92573, CERA CAMPBELL Cat No S1013203

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed.

S & F in repairs vitreous china wash down urinal closet water less key valve with key adopter of min size 375 mm x 390 mm x 590 mm incl waste pipe, waste coupling, fancy type concealed stop cock and connection to water line to incl necessary fixing and fitting complete all as specified and directed

S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. Model :- Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32 , Parryware Cat No 8177*, Cera Cat No B1810110 fittings snow white

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. Model : Hindware Model No F320006, CERA Cat No :- F1017201, Kerovit Cat part No :- KA910007 & Asian Paints Cat Part No MAAC101N.

S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed. Model : Cera model No F1014151, Kerovit Cat Part No KB 2111004, Asian Paints Cat Part No MABC101.

S&F in repairs 600 mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.

S&F for 15mm bore CPVC pipe line tubing with all fittings SDR 11 and fixed complete to wall and ceiling or laid in floors incl taking down of old GI pipe complete all as specified or as directed.

S&F for 20mm bore CPVC tubing with all fittings SDR 11 and fixed complete to wall and ceiling or laid in floors incl taking down of old GI pipe complete all as specified or as directed.

S&F in repairs 100mmx100mm stainless steel grating fixed complete all as specified and directed.

S&F in repair fancy type 20 mm dia stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed.

S&F in repairs Vitreous China table/counter top rectangular shape wash basin of suitable size (600 x400 x 120mm ) including SS bottle trap, and cabinet of PVC shutter fixing on counter with SS waste coupling complete all as specified and as directed. Model : Cera Cat Part No S2020141, Kerovit Cat part No :- KB2243 or Jaqur : KVS WHT 35935

S&F in repairs health faucet 1.25 mtr long flexible tube with 15 mm dia SS Braided connection tube with wall hook complete for ETWC incl necessary fitting complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F in repair fancy type 15 mm bore brass chromium plated counter top WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed.

S&F in repairs low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and directed.

Dismantling water tanks and removing to store capacity exc 500 and not exc. 1000 litres complete all as specified and directed.

S & F 1000 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified or as directed.

Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc. complete all as specified or as directed.

S & F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed.

S & F PVC (SWR) 110 mm bore bends all as specified or as directed.

S&F in repair PVC (SWR) floor trap/multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore soil, waste or rainwater pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and as directed.

S&F in repairs PVC 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door

S&F in repairs PVC 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and directed.

S&F in repairs 100mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified or as directed.

S&F in repairs 75mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified or as directed.

S&F in repairs 80 mm bore PVC cowl complete all as specified.

S & F in repairs for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.

S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 75mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Providing and fixing of decorative designed dome shaped stone (Sandstone), dome of height 4 feet (minimum) and 10 to 15 inch each side, in octagan shape, with perforations and cone shape in top, set & fixed with PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) or cement mortar 1:4 fixed at height upto 8 mtr on top of gate /opening and like and the shape & design shall be approved by GE and as shown on Drawing No 01 in PS complete all as specified and directed.

Providing and fixing of decorative designed red stone lamp case of height 6 feet (minimum) and 08 inch dia (minimum) set and fixed with PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) or cement mortar 1:4 incl necessary earth work, providing access for cable etc and the design, shape and size shall be approved by the GE and as shown on Drawing No 02 in PS incl dismantling of old MS pipe complete all as specified and directed.

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

M/S Rajeev Sharma and Co. (BID ID -3149012)

MARUTI BUILDERS (BID ID -3142285)

Builders Harpal (BID ID -3142621)

REHAN CONSTRUCTIONS (BID ID -3147857)