REPAIR TO FLOORING IN OTM/MD ACCN AT ZONE B AND PERIODICAL SERVICES TO EXTERNAL/INTERNAL SURFACE TO OTM/MD ACCN AT ZONE A AND B UNDER GE (ARMY) TRIVANDRUM

Amount

M&L for complete removal of existing treatment and applying 3mm thick layer of wall care putty and then applying two coats of oil bound distemper over a coat of priming coat after preparation of wall surfaces complete all as specified and directed.

M&L for washing, rubbing down and stopping of old distempered surface on walls and applying one coat of oil bound distemper on walls complete all as specified and directed

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash as on wall surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy soprts and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old painted steel Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old surface of walls and applying one coat of Exterior Emulsion paint (Water proofing Paint) all as per manufactures instructions and specified.

M&L for complete removal of existing treatment on walls, roof projections, including fascia, cornices etc by scrapping and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (as per manufacturer's instructions) etc complete all as specified and directed.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even (without using extra cement) complete all as specified and directed.

M&L for rendering 15mm thick with cement mortar 1:4 mixed with water proofing compound @ 3% by the weight of cement on fair faces of brick/concrete work in external surfaces of wall finished even and smooth (without using extra cement) complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.

Supply only integral water proofing compound.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces (as per manufacturer's instructions) etc complete all as specified and directed.

M&L for writing letters or figures (Block. Roman, Italic or Indian) not exceeding 30 cm high including repainting on back ground in black colour complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc. including cleaning the existing surface complete all as specified and directed.

Cutting/ cleaning small trees, saplings, shrubs and under growth complete roots from brick walls, chajjas etc including taking out complete roots from inside walls/ chajjas and making good surfaces in cement concrete 1:2:4 type B1 or in cement mortar (1:4) to match the existing surfaces complete all as specified and directed.

Demolition of cement Concrete (unreinforced) in ground floors and paving's not exceeding 15 cm thickness (below or above ground level) and remove rubbish off the premises complete all as specified and as directed.

M&L for 100mm thick PCC 1:3:6, type C2 using 40mm graded stone aggregate as in sub base of floor or similar work complete all as specified and directed.

M&L coloured and polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, over 20mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for 75mm thick PCC 1:3:6, type C2 using 40mm graded stone aggregate as in plinth/hard standing, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B0 using 12.5mm graded stone aggregate as in sub base for flooring/levelling coarse, sunken floor etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L for non-skid/mat finish ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exisitng including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x 200x 7mm/ 450x 300x 7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match the existing over 10mm thick backing in CM 1:3 complete all as specified and directed.

M&L for non - skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item ser No 30 here-in-before but as in vertical surface (dado/Skirting) to match the shade of floor tiles laid complete all as specified and directed.

M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm and not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non - skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M&L for rendering 10 mm thick cement plaster in cement mortar 1:3 over stone masonry or other than fair faces of brick work/ PCC solid block masonry/ concrete (upto four storey building) complete all as specified and directed.

Taking down wooden shutters of any description exceeding 1 sq.m but not exceeding 2 sq.m each and refixing in same opening after carry out necessary repair work including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.

S&F in repairs Wash down Vitreous China wash down water closet pan 'S' and 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black or white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including provision of lime concrete bedding complete all as specified and directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repairs 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets High or low level fluslhing cistern and connections to pipes and fixing of chain and pull, or lever including all connected items complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube in Chrome Finish and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs stop valves 15 mm bore dia, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

All as per item ser No 43 here-in-before but chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with 02 Nos brass check nuts with washer of length 600mm complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm including cutting for and pinning in ends of brackets or erecting stand and connected fittings including PVC connections 15/20mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated 32 mm mm dia for wash hand basin, glazed ware sinks etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repairs pillar taps of size 15mm bore dia, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F in repairs bib tap of size 15mm bore dia, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Demolition and breaking up drain pipes of dia 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including necessary bend, T and other accessories complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary clamps etc complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary clamps etc complete all as specified and directed

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, outlet 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down 15/20mm bore steel/CPVC tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Cutting chases, pinning in brick walls , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S&F 15mm bore high pressure unplasticised PVC pipes of pressure rating 10 kgf/cm2 including UPVC fittings (bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, bushes, reducers and plugs, etc.) as in walls/ceiling or in floors (upto four storey building) , complete all as specified and directed.

S&F 20mm bore high pressure unplasticised PVC pipes of pressure rating 10 kgf/cm2 including UPVC fittings (bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, bushes, reducers and plugs, etc.) as in walls/ceiling or in floors (upto four storey building) , complete all as specified and directed.

S&F in repairs chromium plated brass shower roses 125 mm size with or without swivel joints including fixing to steel/ pvc pipe or union complete all as specified and directed.

S&F fixed in repair towel rail 20 mm dia, D type 60 cm long of brass Chromium plated complete all as specified and directed.

Satheesh Kumar (BID ID -3374076)

SHILPA ENGINEERS AND CONTRACTORS (BID ID -3374329)

M/S AMBATTU CONSTRUCTIONS (BID ID -3376008)

VIJAYA ENTERPRISES (BID ID -3376411)

DJ GROUP (BID ID -3375865)

PINKATRON SECURITIES PRIVATE LIMITED (BID ID -3375260)

S K ENGINEERS (BID ID -3375091)