GENERAL Goshree Bridges Project to beautify Goshree bridges from Ernakulum to Vypin by installing decorative lights work General Electrical Work

BEAUTIFY GOSHREE BRIDGES BY DECORATIVE LIGHTS

OD267065/2025-2026:Supply installation testing and commissioning of Rectangular shaped architectural LED flood light with integral driver & housing made of extruded Aluminium with Die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The nominal weight of the luminaire shall not be more than 5.5Kg. The luminaire shall be equipped with high-power LED of Cree, Osram, Lumiled or equivalent. The fixture shall have 15° beam angle (±10%), CCT-RGB,NW & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with IP67 connectors. The luminaire shall have system wattage not exceeding 50W . Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The luminaire should have BIS certificate. The luminaire, drivers, controller and software shall be of same make of Philips BVP353 24LED RGBNW 220V L24 15 DMX or Techno commercial equivalent make.

OD315581/2025-2026:Supply installation testing and commissioning of linear exterior rated architectural and landscape grazing light with housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish with the specified RAL code, system wattage shall be less than or equal to 27W at full load and system lumen output of not less than 1,200 lumens. Fixture shall be available with architectural optics with choice of beam angles of 17°x 17° Narrow beam. Light source should be 2700 K. Fixture dimension shall be not larger than 500 x 60 x 65 mm without bracket and weight not more than 2.5kgs. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. The white LED should have SDCM 4 for better color. The luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C and startup temperature range of -35°C to 50°C. Fixture shall have auto-ranging input voltage for 120 - 277 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminaire shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. The luminaire should have BIS certificate. The luminaire, drivers, controller and software shall be of same make of Philips BCP383 12LED 27K 220V 17 L50 DMX or Techno commercial equivalent make.

OD315582/2025-2026:Supply installation testing and commissioning of Outdoor Façade Lighting RGB fittings Jumper cable in 2mtr length for data communication in 4 pole with IP67 Connectors 10 nos per set of Philips ZXP399 Jump 4P DMX cable 2m or techno commercial equivalent

OD315583/2025-2026:Supply and installation of IP67 connector for connecting LED striplight to cables of Philips ZGC 301 IP connector or techno commercial equivalent make.

OD267082/2025-2026:Supply installation testing and commissioning of surface mounted, exterior-rated LED linear strip light with 65W / 5m roll with all the necessary accessories as below that is designed for grazing architectural lighting applications waterproof and anti-dust LED strips. It shall be sealed with Glue-injected with polyurethane (PU). SDCM<5 and RGB. Robust Design & IP68 rating for outdoor use. Luminaire shall have input voltage 24VDC and separate DMX Decoder for control, Operating temperature -40°C to 50°C, IP68 & IK04 protection of Philips BGC302 RGB L5000 IP68 or techno commercial equivalent make.

OD267114/2025-2026:Supply installation testing and commissioning of surface mounted, exterior-rated LED linearstrip light with 50W / 5m roll with all the necessary accessories as below that is designed for grazing architectural lighting applications waterproof and anti-dust LED strips. It shall be sealed with Glue-injected with polyurethane (PU). SDCM<5 and 3000K CCT. Robust Design & IP68 rating for outdoor use. Luminaire shall have input voltage 24VDC, Operating temperature -40°C to 50°C, IP68 & IK04 protection equivalent to Philips BGC302 3000 L5000 IP68 or techno commercial equivalent make.

OD267137/2025-2026:Supply installation testing and commissioning of IP67 rated DMX Decoder suitable for receiving commands from DMX I Player and provide commands to strip profile for controlling upto 10 metres length as required.

OD267165/2025-2026:Supply installation testing and commissioning of 24V 200w LED Strip light Driver with IP67 Protection of Meanwell, Philips, Osram or Techno commercial equivalent

OD267172/2025-2026:Supply and installation of surface mounting extruded aluminium profile having min 37mm width and 13mm depth and Beam angle 120 degree with UV resistant PC diffuser for out door application as required.

OD267266/2025-2026:Supply and installation of compact DMX signal splitter cum amplifier that takes the incoming DMX512/RDM signal and amplify the signal and supporting bi-directional communications for discovery, addressing and DMX control of light fixtures.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6 X 32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Operating temperature shall be -10° to 35°C. The maximum power consumption shall be less than 4.5W and input voltage shall be 12-24V DC of Philips VAYACT LRC2013 DMX 6-SPLITTER RB-6WM V2 or techno commercial equivalent make.

OD267344/2025-2026:Supply installation testing and commissioning of compact or mini 4 pole DMX signal amplifier that takes the incoming DMX512 signal and amplifythe signal and supporting uni-directional communications for DMX control of light fixtures. The maximum power consumption shall be less than 1.5W and input voltage shall be 4P 12-24V DC of Philips ZXP399 DMX amplifier or techno commercial equivalent make.

OD267456/2025-2026:Supply installation programming and commissioning of DMX512 Iplayer 3 Controller suitable for powerful light show storage and playback device capable of delivering light shows to installations with up to 340 unique light addresses, custom show-authoring capabilities, an intuitive LCD interface and onboard light addressing features, two DMX output ports, each controlling a universe of 512 DMX channels of Works as a stand-alone or computer-driven controller, Secure Digital (SD) card drive for flexible show storage, USB 2.0 interface for downloading shows and configuring from attached PC,Flexible, adaptable mounting options ,Should be provided with light show authoring software, Direct line voltage power supports 100- 240VAC,Minimum Five pre configurable effects using same Light fixture, controller and light authoring software from same OEM make of Philips SSLCTR LRC9628 IPLAYER3 EU or techno commercial equivalent make.

OD325334/2025-2026:Supply installation testing and commissioning of LED street lantern with a system output of 70w(+/-2w) LED Streetlight with 9800 lumens light output, greater than 140 Lumens light output BIS certified with a luminaire body made of spun aluminium permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK10) fitted with a Vent Plug pressure equalization unit, . Highly efficient temperature resistant lenses for light distribution for providing excellent photometry to optimally cater to desired applications.. Overall system efficiency of 140lm/W at correlated colour temperature (CCT) of 3000K, colour rendering index (CRI) &gt;70 and L70 rated lifetime of 75,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea BIS certified ,potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common &amp; Differential Modes). The Bidder shall submit LM79 test reports from a NABL-accredited third-party laboratory, and LM80 certificates issued by the LED chip OEM. CAT REF: Batwin type spread of Philips BRP501 Series or Techno commercial equivalent.

OD325070/2025-2026:Supply and installation of 6 meters Hot dip galvanized pole in Square shape including 1.5 meter arm bracket with PU Coated finish, off white. The pole shall be in 125mm square and 4mm thick, base plate shall be min 16mm thickness of same size with the pole with reducer at the end to fix the light, GI pole T washed and primered (ASTM A123, with minimum average GI coating of 65microns.), in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in &amp; loop out. Design comply EN40 standard and basic wind speed 140kmph. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with off white Polyurethane paint (marine grade) of minimum average DFT of 65 microns (Total pole thickness 165 micron). The column &amp; brackets to be painted in MRF off white finish marine treatment. The pole shall be of composite construction designed to wind load corresponding to a basic wind speed of 140kmph without any deformation or damage . The base pipe shall be sourced only from Tata Steel or Jindal A valid certificate of origin from the respective OEM must be enclosed along with the bid. Two GI brackets painted the same colour of the pole for fixing advertisement boards may be provided to the pole as required. The Bidder is required to submit a structural test report issued by a certified structural engineer or Philips/Transrail or Utkarsh.

OD267596/2025-2026:Supply fixing of GI threaded rod foundation bolt 4nos of 8.8 grade M20 size in 500mm length chemical anchoring vertically into the foot path . The bolt shall be anchored minimum 10cm inside concrete including 2nuts &amp; washers. Providing of one support bracket to the existing pillar if required. The Threaded rod and chemical shall be of Hilti or Fischer only.

OD267628/2025-2026:Supply and fixing of IP68 Protected 3 pin T - Type Cable connector suitable for 1.5 sqmm/ 2.5sqmm 3 core flexible copper cable loop-in loop-out application

OD267661/2025-2026:Supply and fixing of screw on wire connectors made of tough thermoplastic with 300v/600v 105 degree C, Zinc plated square wire spring to ensure good grip on conductors, suitable for connecting wires without any moisture as required. 100 nos pack.

OD267723/2025-2026:Supply and laying of 2 pair Copper 0.5sqmm stranded RS485 data Communication Cable, HDFMPE/PVC coated communication from controller to fixtures etc as required.

90.6.5.16:Supply and drawing the following sizes of multi-core PVC insulated &amp; FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 0.75 sq mm

OD267789/2025-2026:Supply installation testing and commissioning of of 30 KVA Three phase Oil Cooled wide range unbalanced micro controller based servo controlled voltage stabilizer including oil. Range 295-465 Volt, Output 400V +1% of Adroit or Techno commercial equivalent.

OD267806/2025-2026:Supply and fixing of 300 x 600x 214mm MI Empty box with IP65 protection of Hensel Mi0411 or equivalent.

OD267888/2025-2026:Supply and fixing of water proof grade silicon clear gel tube for filing in joints as required.

OD268249/2025-2026:Supplying and fixing 24Hours Digital Time Switch for operating ON-OFF function in the existing MCB DB/enclosure complete with connections, testing and commissioning etc. as required. (LK make Digital Time switch 2 module cat no 67DDT0 or Techno Commercial equivalent approved by engineer in charge)

OD268289/2025-2026:Supplying and fixing following rating type AC-1, 4pole contactor in the existing MCB DB/Enclosure/Panel board complete with giving necessary connections, etc. as required. 40A LK make MCX 40 or Techno commercial equivalent.

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated &amp; FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated &amp; FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm

90.6.5.20:Supply and drawing the following sizes of multi-core PVC insulated &amp; FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 4.00 sq mm

90.6.5.21:Supply and drawing the following sizes of multi-core PVC insulated &amp; FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 6.00 sq mm

OD329448/2025-2026:Supply and drawing the following sizes of multi-core PVC insulated &amp; FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 4 core10 sq mm

OD329453/2025-2026:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 4 core16 sq mm

90.6.4.51:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 1 Run

90.11.1.14:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

OD268378/2025-2026:Supplying and fixing 40 A to 63 A, TP MCB (C curve), 10 kA breaking capacity rating, 240/415 volts, &quot;C&quot; curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole-

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

OD268748/2025-2026:Supply and fixing of Three Phase Surge Protection Device as per EN 61643-11 / IEC 61643-11 suitable for protecting Class I + Class II Modular combined lightning current and surge arrester as TT and TN-S systems (3+1 configuration). Lightning impulse current up to 50KA and nominal discharge current 25/50KA with a response time (tA) less than 100 ns. The Lightning impulse current shall be min 25 / 50kA suitable for mounting on 35mm Din rails. Easily replaceable protection module having indication green to red of DEHNvap DVA CSP 3P 100 FM (900 360)

OD268387/2025-2026:Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/equipments including providing suitable size insulated sockets at the termination points or soldered properly,providing numbering ferules for the proper identification of the wiring, keeping the wiring firm by suitable tie/tie mounts/PVC duct etc as required. 1.50sq mm wire single run

OD328334/2025-2026:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & shall conform to relevant IS. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc. , detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc. shall not be used for the fabrication of panel assembly. The measurements will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut &amp; bolt etc.

90.14.3.1:Supply and providing heavy duty &#39;A&#39; section neoprene gasket in the panel boardA&#39; section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

2.1.2:Providing and fixing following capacity TP&amp;N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP &amp; N

OD315587/2025-2026:Supplying and fixing 63A, HRC Fuse Base with HRC Fuse link with connections, in existing meter board etc. as required.

OD315588/2025-2026:Supply and installation of 63 A, 2 Way neutral links mounted on DMC/SMC base

OD315589/2025-2026:Supplying and installing following size of FRP cable trays with top covering with convenient sections, joined with connectors, elbows, tees, reducer, bend, etc.suspended from the ceiling with manufacturer approved suspenders including bolts &amp; nuts, etc. with all accessories required for complete installation as per the direction of Engineer in charge as required. 150 mm width X 50 mm depth X 3 mm thickness

OD328256/2025-2026:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 40/32 mm or nearest size

OD328521/2025-2026:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 40/32 mm or nearest size

OD270873/2025-2026:Supply and laying of one number PVC insulated and PVC sheathed / XLPE aluminium armoured power cable of 1.1 KV grade conforming to IS 1554/(part I)/1988 for PVC &amp; IS 7098/(part I)/1988 for XLPE of following size in the existing RCC/ HUME/ METAL/GI/DWC pipe as required. 4x10 sqmm

OD327637/2025-2026:Supply ,laying and fixing of one number PVC insulated and PVC sheathed / XLPE Aluminium conductor power cable of 1.1 KV grade conforming to IS 1554/(part I)/1988 for PVC & IS 7098/(part I)/1988 for XLPE of following size on wall surface as required. 4x10 sqmm (clamped with 1mm thick saddle)

OD270916/2025-2026:Supply ,laying and fixing of one number PVC insulated and PVC sheathed / XLPE Aluminium conductor power cable of 1.1 KV grade conforming to IS 1554/(part I)/1988 for PVC & IS 7098/(part I)/1988 for XLPE of following size on wall surface as required. 4x6 sqmm (clamped with 1mm thick saddle)

OD327636/2025-2026:Supply ,laying and fixing of one number PVC insulated and PVC sheathed / XLPE Aluminium conductor power cable of 1.1 KV grade conforming to IS 1554/(part I)/1988 for PVC & IS 7098/(part I)/1988 for XLPE of following size on wall surface as required. 4x4 sqmm (clamped with 1mm thick saddle)

9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

OD268890/2025-2026:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 6 sq. mm

OD268889/2025-2026:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 4 sq. mm

OD328246/2025-2026:Supplying and providing earth clamps for siemens/ trapdoor type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 1.5 sq mm to 16 sqmm size cable with 12 mm wide x 1 mm thick clip

OD268749/2025-2026:Supplying and Fixing of Insulated Cable Glands for 4 -16 sq mm Armoured Cables IP 66 / 67 / 68. HENSEL make category no. GSC 20 M 20

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD268886/2025-2026:Supplying and laying 32 x 6 mm GI strip in the existing trench as strip earth electrode, including connection/ terminating with suitable nut, bolt, spring, washer etc. as required.

OD268891/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing MS box , earth bus, earthing system etc. as required including drilling necessary holes as required. 25 x 6 mm brass bolt &amp; nut.

OD268892/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing MS box ,earth bus, earthing system etc. as required including drilling necessary holes as required. 25 x 3 mm brass bolt &amp; nut

OD327542/2025-2026:Providing and drawing 2.65 mm(12 SWG) copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

OD327544/2025-2026:Providing and drawing 3.15 mm (10 SWG) copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

OD331578/2025-2026:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

OD268939/2025-2026:Dismantling all the electric connection from the existing pole, remove the nuts and then bring down safely by using Crane, leading and keep it in a very safe place as the direction of the engineer in charge.

90.16.2.4:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)

OD268936/2025-2026:Transportation charges for the dismantled poles by hired vehicle to a distance up to 10 KM and carrying up to 10 poles excluding loading and unloading.

OD268937/2025-2026: Labour charges for Dismantling the existing poles from the work site , loading, unloading and stacking the same as per the direction of engineer in charge.

OD319188/2025-2026:Supply and providing stainless Steel Cable Tie of 680mm length x 4.6mm width 100 nos per pack as approved by engineer in charge