Construction Work of Iconic Road At. Navali Chowk to Avkar Pavbhaji to Jeshar Road Gate, Savarkundla, Dist.: Amreli Under Swarnim Jayanti Mukhya Mantri Saheri Vikash Yojana Year-2025-26 (Gauravpath). (Second Attempt)

NAME OF WORK : CONSTRUCTION WORK OF ICONIC ROAD AT. NAVALI CHOWK TO AVKAR PAVBHAJI

TO JESHAR ROAD GATE, SAVARKUNDLA

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_______Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 4,12,30,063=00 Put to Tender Rs. 4,12,30,063=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26 (GAURAVPATH)

NAME OF WORK :- CONSTRUCTION WORK OF DIVIDER & PROVIDING, SUPPLYING, ERECTING OF STREET

LOCATION : Navali Chowk To Avkar Pavbhaji To Jeshar Road Gate, Savarkundla.

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over the

run and back filling the same and making the surface as normal ground. 6650.00 74.74 Rmt

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable (A) 50 mm

outer dia 6570.00 62.62 Mtr

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 90 Watt and above assembled on single MCPCB

of make of Ambika Poles Pvt. Ltd - (iv) 90 watts (Catt-III) 204.00 7575.00 Ea

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (B)

4 core 10 Sq. mm 1450.00 140.39 Mtr

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (C)

4 core 4 Sq. mm 6600.00 117.16 Mtr

Providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat.III 144.00 270.68 Nos

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 9.00 6173.12 No.

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket, heavy duty end

terminal connection,danger notice board, necessary ventilation,earthing

strip complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall

be measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size (B) The standard

companies switch gear shall be used and only manufacturers at CPRI

approved factory (i) with 350mm depth 1.44 10468.65 Sqmt

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber

and heavy duty cover. (approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical (CCM Compound) -

Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2% (C) Back fill Compound

:- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted

[B] For Electrical installation up to 11 KV located in other than normal

soil i.e. Soft Rock, Marshy Soil etc. -Length of Pipe : 2 mtr -Back

filling Compound :1 no. Bag of 25 Kg. 8.00 5760.03 Nos

Supplying and erecting approved make Designer pole made from

Aluminium casting + GI Pipe of make of lighttree- LT-912 The pole should

be made as per IS. and shall be coated with hot dip galvanizing with

graphite gray color as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting,

stud type terminal and arrangement for cable termination to be erected as

per details given by manufacturer considering site requirement.(h) 8 meter

Long 70 mm Top X 155 mm bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm long with

necessry G.I J-Bolt.Approx Pole weight 97 kg ONE SIDED POLE 84.00 11615.00 Nos

Supplying and erecting approved make Designer pole made from

Aluminium casting + GI Pipe of make of lighttree- LT-912 The pole should

be made as per IS. and shall be coated with hot dip galvanizing with

graphite gray color as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting,

stud type terminal and arrangement for cable termination to be erected as

per details given by manufacturer considering site requirement.(h) 8 meter

Long 70 mm Top X 155 mm bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm long with

necessry G.I J-Bolt.Approx Pole weight 97 kg TWO SIDED POLE 60.00 16665.00 Nos

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner.( for

Supplying & erecting approved make Digital time switch having lithium cell

6 years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches &

housed in fire proof thermoplastic enclosure & transparent cover erected

as required with necessary connection erected as directed.

Supplying and Erecting Of L.E.D. type High bay fixture having Power

Consumption of following watts with, Input Voltage 110 - 290 V.AC with full

efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED Driver used for

maximum power saving, Best Quality Aluminium alloy housing and

aluminium Dome for better heat dissipation, CCT Cool white (6000K), CRI

80, Beam angle > 120 degrees, working temperature -20 deg c to +55 deg

c, Body IP 65 (B) 150 to 200 watts 18.00 10271.70 Each

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/ CRCA/

aluminium pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED driver

efficiency > 85% as per approved vender list make (fitting required LM-79

& LM-80 Certificates) (NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (D) LED Strip Light (ii)

Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral

suitable Driver complete. Cat-III 1542.00 220.18 Rmt

Supplying and erecting LED outdoor fittings with LEDs of wattage7- Watt

bollard light of make of light tree - LT-590 84.00 1818.00 Nos

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & connected

to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner. (A) 1.5/ 2.5/4/6 Sq.mm 96.00 6.06 Nos

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (A) 2 to 4 core 2.5 / 4 Sq.

(C) 2 to 4 core 10 Sq. mm 8.00 38.38 Nos

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work 230.00 1082.34 Cumt

Box cutting the road surface to proper slope and camber for making a

base for road work including ramming the excavated stuff and despositing

on the road side slope as directed up to all lead and strata 230.00 109.41 Cumt

Providing and laying cement concrete 1:2:4 (1-Cement : 2- coarse sand : 4-

machine cut stone aggregates 20 mmnominal size) and curing complete

including cost of formwork in (A) Foundation and Plinth 86.30 3805.28 Cumt

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cmheight and 15cm thick of M200 grade

concret as per approved design and A59 including excavation for fixing in

proper line and level, filling the joint with C:M 1:3(1 cement : 3 fine sand)

etc complete. 2300.00 402.54 Rmt

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc.

complete. 207.00 301.77 Cumt

wall primer of approved brand 690.00 16.52 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered materials.etc

complete 690.00 120.26 Sqmt

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M-300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS

: 2006 including 35 mm Sand/stone dust/greet layer for levelling and filling

the joint with sand in proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete. 690.00 706.93 Sqmt

Preparation of beds for hedging and shrubbery by excavating 60 cm deep

and trenching the excavated base to a further depth of 30 cm, refilling the

excavated earth after breaking clods and mixing with sludge or manure in

the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% :

one part of stacked volume of sludge or manure after reduction by 8%),

flooding with water, filling with earth if necessary, watering and finally fine

dressing, leveling etc. including stacking and disposal of materials

declared unserviceable and surplus earth by spreading and leveling as

directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge,

manure or extra earth to be paid for separately) 172.80 225.07 Cumt

Supplying and stacking of good earth at site including royalty and carriage

upto 5 k m lead complete (earth measured in stacks will be reduced by

20% for payment). 86.40 520.75 Cumt

Supplying and stacking sludge at site including royalty and carriage upto

km lead complete (sludge measured in stacks will be reduced by 8% for

paymen. 86.40 296.94 Cumt

Araucaria cookie having ht. 60 cm to 75 cm, straight, well developed, fresh

and healthy with lush green leaves from bottom to top in 20 cm size of

Earthen pot / Plastic pot.. 200.00 185.84 Nos

Plumeria acutifolia height 150-165 cm. with 3-4 branches in big size HDPE

Foxtail palm ht. 180-210 cm bottom girth 25-30 cm well developed in big

size HDPE bag 200.00 484.80 Nos

Lagerstroemia thorelli height 150-165 cm.in big poly bag size 25 cm 200.00 121.20 Nos.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26 (GAURAVPATH)

NAME OF WORK :- PLANATION, GARDENING WORK & 3D PAINTING WORK

LOCATION : Navali Chowk To Avkar Pavbhaji To Jeshar Road Gate, Savarkundla.

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a

base for road work including ramming the excavated stuff and

despositing on the road side slope as directed up to all lead and strata 1900.00 109.41 Cumt

Providing and laying controlled cement concrete M.250 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (A) BEAMS :(i)Having

cross-sectional area 0.05 to 0.08 Sq.M 32.40 10824.26 Cumt

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc.

complete 1900.00 301.77 Cumt

Providing 20 mm thick cement plaster in single coat on single or half

brick walls for plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1cement : 3-sand) . 1000.00 250.54 Sqmt

Providing and fixing of M.S. grill of required pattern to wooden frames of

window etc with M.s. flats at required spacing and frame allround, ssqure

or round bars with round headed bolts and nuts or by screwas. (B)

Ornamental Grill 39600.00 160.85 Kg

Preparation of beds for hedging and shrubbery by excavating 60 cm

deep and trenching the excavated base to a further depth of 30 cm,

refilling the excavated earth after breaking clods and mixing with sludge

or manure in the ratio of 8:1 (8 parts of stacked volume of earth after

reduction by 20% : one part of stacked volume of sludge or manure after

reduction by 8%), flooding with water, filling with earth if necessary,

watering and finally fine dressing, leveling etc. including stacking and

disposal of materials declared unserviceable and surplus earth by

spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m

complete (cost of sludge, manure or extra earth to be paid for

separately) 9500.00 225.08 Cumt

Supplying and stacking of good earth at site including royalty and

carriage upto 5 k m lead complete (earth measured in stacks will be

reduced by 20% for payment). 4275.00 520.76 Cumt

Supplying and stacking sludge at site including royalty and carriage upto

5 km lead complete (sludge measured in stacks will be reduced by 8%

for paymen. 5225.00 296.94 Cumt

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface with

light roller make the surface smoothen and light waterning with sprinkler

and maintenance for 30 days or more till the grass establish properly, as

per direction of officer-in-charge. 1140.00 216.54 Sqmt

Providing and Displaying Acalypha twisted well developed with fresh &

healthy 30 cm ht. as per direction of the officer-in-charge. 1500.00 40.40 Each

Bottle palm ht. 210-240 cm bottom girth 30-35 cm well developed in big

HDPE bag 200.00 555.50 Each

Providing and displaying of Croton Golden specimen having ht. 90 cm to

1.05 cm with 5 to 6 branches, well developed, fresh and healthy foliage

in 30 cm size of Earthen pot/Plastic pot as per direction of the officer-in-

charge. 1000.00 169.68 Each

Provding & Supplying work of Plantation Port of size 0.60 x 0.90x

with 50 mm thick RCC M-20 walls ,80 mm thick Base with outer surface

of Dark telephonic granite including g TMT Bar FE 500/500D

reinforcement consisting of 8mm dia horizontal bars @ 150 mm c/c and

L-shaped 8mm dia vertical bars @ 150mm c/c including cutting,bending

and binding wires, placing in position, providing shuttering and

concreting by using cocrete mixer, compaction by vibration etc complete

as per Engineer in charge. 100.00 6568.08 Each

Providing and displaying of Cineraria dwarf hybrid 750.00 707.00 Each

Providing and displaying of Lupine hybrid 1000.00 424.20 Each

Plumeria alba height 165-180 cm. with 3-4 branches and thick stem in

big size HDPE bag 300.00 227.25 Each

Tabebuia sp. height 25.-265 cm. in big polybag size 25 cm 100.00 171.70 Each

Jacaranda mimosifolia height 250-265 cm. in big poly bag size 25 cm 120.00 121.20 Each

Petunia hybrid different colour single well developed in full bloom in

cm Earthen/Plastic Pot. . 5000.00 42.42 Each

Allyssum white in full bloom well developed fresh & healthy in 20 cm

Earthen Pot/Plastic Pot. . 5000.00 42.42 Each

Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high,

aboveground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x

mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat

iron rings in two halves, fixing together at site with required six numbers

of 8 mm dia and 30 mm long bolts, including painting two coats with

synthetic enamel paint of approved brand and manufacture over a coat

of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm

shall be welded to the tree guard near the middle height and lettered

CPWD / PWD/ any other approved name. The tree guard shall be

suitably fixed to the ground by embedding four legs of tree guard in pits

of suitable dia and to a depth of 25 cm, refilling the pits with soil and

ramming, complete in all respect as per satisfaction and direction of

Officer-in-charge. 1000.00 2019.89 Nos

providing supplying and fitting of cast iron Bench made up of MS Square

tubes (50mm X 25mm) in Length of1500mm size decorative Stand /

Legs, With Complete Colour & Painting As per Given Specification With

necessary things.include All cost of material, taxes, transportation to site,

loading / unloading, etc. complete with all incidentals. Warranty periods :

3 year, Bench Type : Integrated Seat and Back, Seating Capacity : Three

Persons, Weight Bearing Capacity in KG : 170, Minimum Weight of Cast

iron Bench In KG : 44, Dimensions : Total Height : 800 mm from Ground

level, Width: 600mm, Seat Height : 487mm from ground level Total Area

Required : 1830mm X 915mm, thickness of stand/Legs : 36mm Cast

Iron Support Finish : Coated With a rust inhibiting paint 40.00 5050.00 Nos

Side Wall Painting or 3D Painting

Removing dry or oil bound distemper by a washing and scraping and

sand papering the wall surface smooth including necessary repairs to

scratches complete. 1880.00 11.53 Sqmt

Scraping oil paint from steel and other metal surface and making the

surface even (with Hand Scraping.) 1800.00 51.78 Sqmt

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil, grease, dirt

and other foreign matter and scoured with brushes fine steel wood,

scrapers andsand paper with ready mixed priming paint brushing red

lead. 1880.00 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter. 1800.00 92.20 Sqmt

Road marking with hot applied thermoplastic paints with reflectorising

glass beads on bitumin surface providing and laying a hot applied

thermoplastic compound 2.5mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is excluding of

surface applied glass beds as per IRC:35-2015. The finished surface to

be level, uniform and free from streaks and holes. zebra patta /bump

patta lane/center line/ edge line/cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for

the Retro reflectivity should be two years. 816.67 367.72 Sqmt

Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile

sterine injuction high compressed molding with reflector made of MMC

(prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous

adhesive 100g. with each unit for fixing. (High Intensity grade) 2529.00 375.72 Nos

Painting lines, deashes, arrows, letters etc on roads, Air fields and like in

two coats with road marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter. (i) Over 10cm in width 204.00129.29 Sqmt

Wall painting (two coats) natural /artificial art or 3D picture on Wall

surface to give an required shape even shade including throughly

brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth to remove all dirt, and remains of loose

powdered materials.etc complete 1880.00 101.00 Sqmt

3d Siporex Block Material realistic artificial Carving art or 3D picture on

surface to give an required shape even shade including throughly

brushing the wall surface free from mortar droppings and other foreign

matter and sand papered smooth to remove all dirt, and remains of

loose powdered materials.etc by appilying Primer Coating of 2 coat as

per selected color theme, Finel Touchup and PU Coating On Final

Surface to achieve full finishing on 3d carving Art complete including all

All Material, Transportation, Labour , & other cost excluding GST as per

direction of the officer-in-charge. The Theme of the Art is on the

Savarkundla Histrical events or any uniq and iconic things or Places of

savarkundla Town 16.00 27270.00 Sqmt

Maintaining Cleanliness of Approach Roads

Maintaining Cleanliness of Approach Roads in Cities in which Roads

becomes dirty from Dust, Debris, Garbage, Wastes, uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm

onside of roads – to remove & maintain them by manually on Weekly

basis in case of Having Sectional Area (a) Single Lane with rise kerbs

3.50 m Fector 0.5 (b) 2-Lane with rise kerbs 7.00 m Fector 1.0 (c) 4-

Lane with rise kerbs 14.00 m Fector 1.5 (d) 6-Lane with rise kerbs 21.00 Km/

m Fector 2.0 (e) 8-Lane with rise kerbs 28.00 m Fector 2.5 10.50 1510.25 Day

Providing and fixing Kiosk Board on Road Side Street Pole made out of

25x25mm hollow MS pipe size 90x60 cms. rectangular as per design of

back side frame alluminium compous panal grade 0.18 with photoframe

sidewall ACP sheets Grade - 0.25 including cost of Direct LED Moduler

with Copper Wire 2 core 2.5Sqmm with front side heavy quality backlit

flex with printing and ms frame (changeable from time to time) including

all labour transportation charges as per engineer in-charge. etc.comp.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME:- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26

NAME OF WORK :- PROVIDING,FIXING PRE-CAST NEW PAVER BLOCK & REPARING OF EXISTING

LOCATION : Navali Chowk To Avkar Pavbhaji To Jeshar Road Gate, Savarkundla.

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Removing interlocking type cement concrete paver block

(Rubber moulded) of approved shape, design & colour &

moved it on nagapalika suggested place within 5 Km of Lead.

Item includes levelling by using vibratory plates compacted

machine. Item also includes all materials, labour,

equipments, tools, plants, watering, cleaning etc.complete.

Box cutting the road surface to proper slope and camber for

making a base for road work including ramming the

excavated stuff and despositing on the road side slope as

directed up to all lead and strata 2480.00 109.41 Cumt

Crushed stone aggregate for machine cut hard quality (I)

40mm to 63mm size all lead and lift 930.00 669.63 Cumt

Supplying of Stone Dust all lead and lift 74.40 363.60 Cumt

Spreading the stone aggregate for rolling and W.B.M.

including filling the interstices to required camber and

gradient (excluding spreading of Blindage) (ii) 40mm to

63mm size aggreagates 930.00 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and

leveling to camber and gradient as directed.. 74.40 154.84 Cumt

Rolling and consolidating water bound macadam (except

laterite and Kankar) including watering not exceeding 150mm

thickness (Main layer including binding materials ) including

filling in depressions which occur during the process. (A)

With power roller 930.00 15.87 Sqmt

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- Machine Cut stone aggregates 40mm

nominal size) and curing complete including cost of formwork

in (A) Foundation and Plinth 620.00 3221.90 Cumt

Providingand fixing Cobble Stone block 100 X 100 X 60 mm

thick with grade of concrete M-200 pnumatic compressed/

vibrated mechanically and as per approved design including

50mm Dust layer for levelling and filling the joint with sand

inproper line and level as per In Charge In

gineeret.Complete. 6200.00 961.52 Sqmt

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cmheight and

15cm thick of M200 grade concret as per approved design

and A59 including excavation for fixing in proper line and

level, filling the joint with C:M 1:3(1 cement : 3 fine sand) etc

complete. 4700.00 402.54 Rmt

Providing Supplying and Installation of Name Plate of Size

1x1.30 mt with supporting M.S Pole.of hight 2 mt.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala