Annual maintenance of TTD kalyanamandapam at Kothacheru penugonda in Sri Sathya sai district for the year 2026-27

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. For Ordinary soil-Manual means up to 3m depth.

For Penukonda KM

For Kothacheruvu KM

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete..

For Penukonda KM

For Kothacheruvu KM

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

For Penukonda KM

For Kothacheruvu KM

Construction of Brick Masonry in CM (1:5) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

For Penukonda KM

For Kothacheruvu KM

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

For Penukonda KM

In CM (1:5) 20 mm thick

In CM (1:5) 12 mm thick

Kothacheruvu KM

In CM (1:5) 20 mm thick

In CM (1:5) 12 mm thick

Flooring with Antiskid floor tiles 1st quality of Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs (as per manufacture specification), set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work.

For Penukonda KM

Kothacheruvu KM

Finishing the sides of walls with Ist quality glazed wall tiles of of glazed red or white full body ceramic wall tiles of Size 300 x 600 mm and thickness between 6-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).

For Penukonda KM

Kothacheruvu KM

Painting Two coats for Old External walls with Acrylic Exterior Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

For Penukonda KM & Kothacheruvu KM

Painting Two coats for Old Internal walls with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

For Penukonda KM & Gudibanda KM

Painting with Ready mixed Synthetic Enamel paint in all shades -Grade-II having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

For Penukonda KM & Kothacheruvu KM

do- Two coats for Old Wood Work.

do- Two coats for Old Iron Work.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

For Penukonda KM & Kothacheruvu KM

Supply of Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mmthick conforming to IS:2202 etc., complete as directed during execution.

For Penukonda KM & Kothacheruvu KM

Supply, laying, fixing of 110 mm dia Double socket PVC/SWR pipes confirming to ISI standards of 6kg/CM2 and commissioning the PVC pipes including couplers / bends / tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per the standard practice etc., complete as directed during execution.

For Penukonda KM & Kothacheruvu KM

Supplying, laying and fixing and commissioning the of 75mm dia Single Socket PVC / SWR Pipe 4 Kg/Sq.cm including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc., complete as directed during execution.

For Penukonda KM & Kothacheruvu KM

Supplying of the following Anodized Aluminum materials.

For Penukonda KM & Kothacheruvu KM

do- Aluminium Aldrop (IS:2681) 250 mm long

do- Aluminium Tower Bolt-10 mm Bolt (IS:204) 200 mm Long

do- Aluminium Door Handles (IS:208) 125 mm Long.

Supply of Pin headed Glass 4 mm thick.

For Penukonda KM & Kothacheruvu KM

S & F 25.4 mm dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws.

For Penukonda KM & Kothacheruvu KM

SYMET BIB COCK (CAT.NO:122) Standard 15 mm size Female thread with deluxe handles,86 mm long and 102 mm high and 43mm breadth 12mm seat dia and replaceable washers, having approx. weight of 90gms.

For Penukonda KM & Kothacheruvu KM

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

For Penukonda KM & Kothacheruvu KM

do- 22.20mm ODPipe - SDR 13.5

do- 28.60mm ODPipe - SDR 13.5

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm x 440 mm x 260mm etc., complete as directed during execution.

For Penukonda KM & Kothacheruvu KM

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, etc., complete as directed during execution.

For Penukonda KM & Kothacheruvu KM

Supply and Transportation of 2.00HP 25 Stage,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB / Lubi / PSG / AryenVarsha

For Penukonda KM

Installation, testing and Commissioning of the submersible pump set with all accessories as per the standard specifications for above 60mts and up to 120 mts including laying of G.I. Pipe duly providing the G.I. Pipe of not more than 3 meters length in the Bore well including all incidental charges etc., complete as directed during execution.

For Penukonda KM

Flushing of bore well of dia 165/150 mm with power rig at an average pressure of 150 PSI, including crew charges, completely done to the satisfaction of the department including detachable of all accessories and refix all materials as per the original condition including all labour charges, but excluding cost of materials & excluding taxes etc,, complete.

For Penukonda KM

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

For Penukonda KM & Kothacheruvu KM