Replacement of 01 No. Old Lift installed in the labour block of the Civil Hospital Ambala City District Ambala. (Recall)

Amount

Supply, erection, testing and commissioning of Gearless Stretcher Elevator, Capacity: 1020Kgs/15 Person, Speed: 1.00 meter/sec, Control: High performance Simplex Full collective control system, Drive: AC VVVF drive for more power saving, comfort and safe ride, Stop/Opening: 03 Stops/ 03 Openings, Floor : G, 1 to 2, Travel: 8 Meters (Approx.), Shaft size: 1800mm wide x 3090mm deep, Overhead: 4800mm (Required), Pit: 1600mm (Required), M/C Position: Gearless machine shall be placed above the lift shaft , Car Area Inside: 1000mm wide x 2400mm deep (2.40 Sq. meter), Car Enclosure: S.S scratch resistant cabin, granite flooring on heavy duty M.S. platform, three side s.s single round handrail, Decorative false ceiling with CFL/LED Lighting, Blower/Rotor Motor, Clear Opening: 1000mm wide x 2000mm height, Car Door: Telescopic opening automatic door (S.S scratch resistance Finish), Landing Door: Telescopic opening automatic door (S.S scratch resistance finish), Power Supply: Three 415V AC, 50 Hz plus /- 5% Single 230V AC, 50 Hz plus /- 5% and, Design: These components are generally confirmed as per Indian Standard specification for Elevators or Escalators., Special Features:- Direction arrow with digital position indicators in car and at all landing, Very attractive push buttons with illuminated call registration light in car and all landings, Car emergency light, emergency alarm and emergency stop operation, Intercom communication system from car to ground floor, voice announcing system for car, Full length infrared door curtain safety for auto doors, automatic rescue device in case of power failure or emergency landing (ARD), overload warning device (OLWD), Fireman`s operation switch at Ground floor, as per technical specifications attached complete including with Minor Civil Work Like: Trap Door cutting, hole in the machine room or whichever as required making necessary arrangement to complete the job work upto the entire satisfaction of the Engineer-in-Charge of work. Make: OTIS/Orbis/Johnson/Kone/Schenider/ Hitachi/Mitsubishi/ Kinetic/Hyundai.

Buy back of old existing lift complete scraped and dismantling charges upto the entire satisfaction of the Engineer-in-Charge of work.