S.R. to Building Works

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[1] Demolition including stacking of serviceable materilas 0.50 Cum 1030.81

and disposal of unserviceable materials with all lead

and lift. (i) R.C.C. work

[2] Demolition of Brick work and stone masonry 2.50 Cum 536.09

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift (ii) In Cement Mortar.

[3] Dismentling doors, windows, ventilators etc. (wood or 3.00 Cum 182.94

steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift (ii) Exceeding

Sq.M. in area.

[4] Dismentaling tiled of stone floors laid in mortar 23.10 Sqm 46.77

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

[5] Removing and scraping of old deteriorated plaster of 17.00 Sqm 18.94

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

[6] Excavation for foundation upto 1.50mt.Depth 13.10 Cum 149.67

including sorting out and stacking of useful materials

and disposing of the excavated stuff as directed with

in all lead & Lift (B) Dense or Hard soil.

[7] Filling foundation and plinth with sand under floors 4.90 Cum 460.19

including watering, ramming and consolidating

dressing etc, comp.

[8] Filling available excavated earth excluding rock in 10.48 Cum 130.39

trenches plinth side of foundation etc. in layer not

exceeding 20cm. In depth consolidation each

deposited layer by ramming and watering.

soil in layers of 20 cm. thickness includind watering,

ramming and consolidating etc. comp.

[10] Applying general insecticide pest control treatment to 44.00 Sqm 89.28

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS

part - II ( (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical /Sqm of surface is

recommended as per I.S

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[11] Providing and laying controlled cement concrete M- 0.60 Cum 4107.67

150 and curing complete excluding the cost of form

work and reinforcement concrete work in: (a)

Foundation footing base of column and mass concrete.

[12] Providing and laying controlled cement concrete M- 2.80 Cum 4548.03

250 and curing complete including the cost of form

work but excluding the cost of reinforcement concrete

work in Foundation footing bases of column.

[13] Providing and laying controlled cement concrete M- 1.00 Cum 6805.38

250 and curing complete including the cost of form

work but excluding the cost of reinforcement concrete

work in Column upto floor two level. Upto ground

[14] Providing and laying controlled cement concrete 5.20 Cum 3860.16

M.150 for curing complete excluding cost of formwork

and reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

[15] Providing and laying Controlled cement concrete 1.47 Cum 7447.25

M200 using B.T. stone aggregate and curing etc.

complete including the cost of form work but

excluding the cost of reinforcement. (a) Column for All

[16] Providing and laying Controlled cement concrete M 4.00 Cum 5800.43

250 using B.T. stone aggregate and curing etc.

complete including the cost of form work but

excluding the cost of reinforcement for (c) PLINTH

BEAM having cross sectional area more than 0.12 sqm

[17] Providing and laying controlled cement concrete M- 7.00 Cum 4323.81

150 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Plinth PLINTH Slab .

[18] Providing and laying controlled cement concrete M- 1.00 Cum 6143.83

200 and curing complete including the costof form

work but excluding the cost of reinforcement for

reinforced concrete workn in Wall caps / Coping /

Lintel bends Ground Floor.

[19] Providing and laying controlled cement concrete M- 5.00 Cum 6395.69

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS For Ground Floor.

[20] Providing and laying controlled cement concrete M- 0.50 Cum 7447.36

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in LINTELS Ground Floor.

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[21] Providing and laying controlled cement concrete M- 1.00 Cum 6534.84

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in CHHAJJAS All Floor.

[22] Providing and laying controlled cement concrete M- 5.00 Cum 6329.97

200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in slabs for Ground Floor.

[23] Providing T.M.T. bar FE500/500D reinforcement 3270.00 KG 76.21

confirmed to for R.C.C. work including bending,

binding, and placing. In position comp. Up to floor two

level. For All Floor

[24] Brick work using common burnt clay building bricks 4.00 Cum 4021.02

having crushing strength not less than 35 Kg./Sq.m. in

foundation and plinth in cement mortar 1:6 (1

cement:6 fine sand) (b) Conventional.

[25] Brick work using common burnt clay building bricks 14.20 Cum 4289.33

having crushing strength not less than 35 Kg./ Sqm. in

cement mortar 1:6 (1 cement : 6 Fine sand) in super

structure above plinth level upto floor two level (for

G.F) Conventional

[26] BOTH SIDE VINEER FINISH FLUSH DOOR 9.20 Sqm 11505.66

Providing Material & Labour charge for making Flush

Door (finished size of door is 46 mm) of suggested size

considering waterproof flush door sheet of 38 mm

thkness covered both side finished with 4 mm thk

vineer finished with PU polish on both sides of shutter

supprted by SS -304 finish hinges. All exposed framing

of approprite sizes made by TEAK wood bidding

complete with polish. Finishing with all necessary

hardwares like handles, conceal mortise locks,

cylinders with 6 nos of keys, MS nails, SS-314 screws

stopper -12"-, Aldrop, Door Chain, Towerbolt, Door

viewer, Door Stopper, Magnatic door catch, Floor

spring 100 KG etc. as per details given in drawing and

as per instructions of Architect/Engineer In charge.

Please see the Attached Make List for Apporoved

[27] Providing and fixing Anodized Alluminum Section 5.00 Sqm 2717.91

Jindal Deluxe Sliding Window System 27mm series

THREE track window with middle fixed window as

shown in elevation, shutter with 5mm thick

transparent plain float glass, with transparent silicon

sealant with allu. anosized coated fittings and fixture

etc complete.

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[28] Providing and fixing standared extruded of 1.10 Sqm 1175.56

alluminium section of size 63mm x 38.10mm x 1.2mm

@ Wt. 0.643 Kg/mt) with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation {Colour as directed

by Engineer in charge except black & Alluminum

section and glass

[29] Providing and fixing Safty grills of required pattern for 122.00 Kgs 106.15

windows Rectangular CRC pipes of size 50 x 30 x 2mm

at required spacing as per design including fixing rat

mesh and hold fasting with coach bolts including one

coat of primer and two coats of mattfinished oil

painting etc complete.

[30] Providing and laying Vitrified tiles 8 to 10 mm thick, 36.00 Sqm 1073.13

24'' x 24'' in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-cement :

3-coarse sand) finishing with flush pointing in white

[31] Providing and laying Vitrified tiles 8 to 10 mm thick, 4.00 Sqm 1484.61

36'' x 36'' in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-cement :

3-coarse sand) finishing with flush pointing in white

[32] Providing and laying 60 x 60cm GTV Vitrified tiles 8 to 3.90 Sqm 1141.45

10 mm thick with pattern colour & Shade as detailed

approve by architect (10% Dark colour tiles Pattern)

in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

[33] Providing and laying 30 x 60Cm size Ceramic tiles 38.30 Sqm 981.50

6mm thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry

[34] Provding and filling the joint with epoxy grout 3 mm 63.00 Sqm 25.25

width and 8 to 10 mm deep, including cost of

necessary materials, PVC spacers, filling grout and

cleaning etc complete as directed by engineer in

charge. { Colour and Pattern as directed by engineer in

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[35] Providing and laying water proofing tretment with 43.00 Sqm 1053.43

chaina mosaic tiles flooring over avg 40 mm C.C. 1:2:4

(1 Cement, 2 sand, 1 Kapchi 20mm + 3 grit 6mm to

10mm) bedding for maintaining slope for plain and

curve surface & 12 mm to 20 mm of broken piece of

ceramic / glazed tiles (one or more color as directed)

to be laid over cement mortar bedding of C M 1:3 (1

cement : 3 sand) containg one Kg. of water profing

materials per bag of O P C at plain or / and slops and

to be tempered to bring mortar ceramic up to surface

with using white cement and colour pigment including

rounding of junctions and extending them up to 15 cm

along the wall and curing with bends any pattens or

design as per drawing and cleaning by using oxalic

acid etc complete.

[36] Providing and laying Mirror polished Machine 18.00 Sqm 2629.03

polished Granite stone slab 18mm (Average) thick for

doors & windows sill & Jams clading as per design

including full moulded round front steps & 1cm nosing

& necessary groove on trads of steps ;laid on 20mm

thick cement mortar 1:6 (1 cement : 6 coarse sand)

jointed with gray cement sluury including rubbing and

polsihing etc. complete.for Doors / windows sill &

jams clading.

[37] Providing 20 mm thick double coat mala cement 101.00 Sqm 217.46

plaster on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar

1:2 (1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete. For Ground

[38] Providing 10mm thick cement plaster in single coat on 50.20 Sqm 217.46

plastering on ceilings and sofits of stairs,

brick/concrete walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) including finishing with

a flating coat of neat cement slurry etc. complete. for

Ground Floor

[39] Providing 10mm thick cement plaster in single coat on 8.00 Sqm 192.65

brick/concrete walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) including finishing with

a flating coat of neat cement slurry etc. complete. for

Ground Floor

[40] Wall painting (three coats) including priming coat 130.50 Sqm 336.73

with plastic emulsion paint of approved brand and

manufacture on undecorated wall surfaces to give an

even shade including thoroughly brushing the surface

free from mortar droppings and other foreign matter

and sand papered smooth including applying priming

coat etc. complete.

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[41] Applying two coats of Birla or Asian acrylic lappy 130.50 Sqm 40.59

(putty) and two coats of approved brand and

manufacture on new wall surface to give as even

shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand paper smooth.

[42] Painting two coats including priming coat on new steel 7.00 Sqm 122.98

and other metal surfaces with enamel paint brushing,

interior to give enamel paint brushing, interior to give

an even shade including cleaning the surface of all dirt,

dust and other foreign matter.

[43] 20mm thick sand faced cement plaster on walls upto 89.00 Sqm 335.65

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

[44] Providing laying and jointing in true line and level 40.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[45] Providing laying and jointing in true line and level 30.00 Rmt 91.37

25mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. [B]

25mm dia..

[46] Providing laying and jointing in true line and level 10.00 Rmt 148.12

40mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.[D]

[47] Providing and fixing Handle valve of aprroved brand 2.00 Nos 383.80

(B) 25mm dia.,

[48] Providing and fixing Handle valve of aprroved brand 1.00 Nos 566.61

(C) 40mm dia.,

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[49] Providing, laying and jointing in true line and level 75 20.00 Rmt 714.46

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the

size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

[50] Providing and fixing MS Z clamp on Wall or celling for 45.00 Nos 75.75

Pipe Fitting including all type necessary fittings and

accessory etc. completed as per directed engineer in

[51] Providing and fixing PVC SWR Nahni trap IS 14735 for 4.00 Nos 558.36

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

[52] Providing & Fixing Premium quality approved make 1.00 Nos 3185.67

Bib cock with wall flange including labour, material,

trasportation etc.complete as directed by engineer

[53] Providing and fixing C.P. Brass health faucet with 1.00 No 1916.98

cleaning system 1.25mt. Long P, V.C. flexible tubes and

ABS wall hook with angular stop cock with extension

nipple 62mm log etc. complete.

[54] Providing & Fixing Premium quality approved make 3.00 No 3914.39

Quarter Turn Pillar Cock for Basin including labour,

material, trasportation etc.complete as directed by

engineer incharge

[55] Applying two coats of two component dampproof 464.00 Sqm 275.65

coating of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth as per instruction of Engineer In

[56] Finishing wall with weather proof exterior emulsion 239.00 Sqm 114.53

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

[57] Providing thoruting or plaster drip and moulding to 6.00 Rmt 41.00

R.C.C. chhajja.

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[58] Providing and fixing stainless steel kitchen sink glossy 2.00 Nos 1775.07

ASIS 304 grade and 1 mm thick with overall size

610mm x 460mm x 330mm deep having bowl size

560mm x410mm x 200mm of Nirali or equivalent

brand with all fittings CI or MS brackets painted white

or fixing on stone base including cutting holes and

making good the same brass valve and fisher union

fitting including all necessary fittings

[59] Constructing Sandwitch Platform of 18 mm thick 4.70 Sqm 8888.00

Polished Black Granite at top and 25 mm thick Kota

stone slab using cement mortar 1:3 for sandwich and

fitting at bottom & edges with waterproof rigid

adhesives including macking necessary grooves in

walls with Vertical Kotastone 30 mm x 2 No sandwitch

thick every 60 cm centre to cenre including all labour

material of approved quality incl. full moulded round

front edge fixed in wall for partition and jointed with

grey cement slurry including rubbing and polishing

etc. complete

[60] Providing and fixing 18MM TERMITE PROOF PLY 2.40 Sqm 22361.40

(GREENPLY OR EQUIVALENT) WITH BOTH SIDE

LAMINATE & PVC BEADING ON PERIPHERY and

Providing and Fixing Stainless Steel (Grade -316)

accessories, sheet cutlery basket (2 Nos) , Thali Basket

(2 Nos) , Plain Basket (2 nos) , Cup Saucer Basket (2

Nos) of size 520 x 485 x 100 mm fixing on telescopic

channel (GODREJ OR EQUIVALENT) having hardware

like handles, dead lock, magnet etc with fixing all

expose surface are decoartive laminate sheet and

other inner surfaces are 1.0 mm thick lamiate

including all necessary fixture and fastening (Steel

handle, hinges, stopper, chains and locking

arrangement etc. complete as directed by Engineer-in-

[61] Providing & fixing Gypsum board false ceiling as per 42.00 Sqm 653.47

architectural drawing using M.S. 'E' bottom channel

frame work average 450 mm x 450 mm c/c grid,

vertical 'L' & 12.5 mm thick Gypsum board sheet of

Saint Gobain with providing boxes for lighting

arrangement including all fixtures and fastening etc.

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[62] Blinds assemblies are to be supplied & installed in all 5.00 Sqm 2147.26

windows with great precision. It should be water

resitant and fitted on alluminium headrails duly

power coated and fitted with stainless steel drive rods.

Manual operated and should have ISI mark.Providing

& fixing roller type window curtains of Deck, Aerolux,

Siddhi or eq. make including same brand channel -

chain mechanism, synthetic black out fabric of

approved colour & design, silver coated backside,

same fabric plated pelmet etc. with all necessary

fittings etc. complete as per Architect/ Site engineer's

instructions as per sized specified in detail

in charge and chief architect.

[63] Pro. & Fix.wash down water closet (European w. c 1.00 Each 3171.40

.pan) with integral" p " or " s " trap and PVC flushing

cistern with a pair of C.L.I. Or Mild steel Brackets,

complete with fittings such as lead value siphon,

mm. Nominal size brass ball valve with polythene

float, C.P. Brass handle unions and couplings for

connections with inlet, outlet and over flow pipes,

mm. dia. flush bend including cutting holes in walls

and making good the same connecting the flush bend

with cistern and closet etc comp incl plastic sheet

cover including jointing trap with pipe in cm 1:1 (a)

Viterous china in white or colour

[64] Providing and fixing wash basin with pedestal of std. 1.00 Each 1818.00

Height with single hole for pillar tap with C.I or M.S

brackets painted white including cutting cutting holes

and making good the same including C.P. brass waste

and waste pipes and bottal trap (A) Vitreous China:

(ii) Flat Back washbasin 550 mm x 400mm size.In

[65] Providing and fixing PVC SWR Nahni trap IS 14735 for 2.00 Each 558.36

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

[66] Providing and fixing screw down bib taps of following 3.00 Each 186.83

size (A) Brass screw down bib tap polished bright. (i)

[67] Providing and fixing C.P. brass shower rose with 1.00 Each 282.16

15mm or 20mm inlet (A) 100mm dia. Each

[68] Providing and fixing Brass complete Divertor set, 1.00 Each 10537.33

silver crome finish divertor outer body of high flow

single lever concealed mixer & divertor for bath &

Shower system with divertor assembly & cartridge

sleeve inclusive exposed parts kits complete as

ditrected by engineer in charge

[69] Providing and fixing Spout heavy duty of following 1.00 Each 3883.45

size Brass chromium plated (i) 15mm dia.

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[70] Providing and fixing toilet paper holder (A) C.P. Brass 1.00 Each 418.68

[71] Providing and fixing C.P. Brass health faucet with 1.00 Each 1916.98

cleaning system 1.25mt. Long P, V.C. flexible tubes and

ABS wall hook with angular stop cock with extension

nipple 62mm log etc. complete.

[72] Providing and fixing pillar tap, capstan head, screw 1.00 Each 308.73

down high pressure with screws, shanks and back

nuts (i) 15mm dia.

[73] Providing and fixing 600mm x 450mm bevelled edge 2.00 Each 833.73

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

[74] Providing and fixing C.P. brass towel rail comlete with 1.00 Each 603.19

C.P. brass brackets fixed to wooden plugs with C.P.

brass scews (B) 600mm x 20mm size

[75] Providing and fixing S.W. gully trap with C.I. grating 1.00 Each 1246.92

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight (i) Square mouth traps (B) 150mm x 100mm

size P of R type

[76] Providing and fixing CP brass screw down stop cock of 2.00 Each 205.83

approved quality 15mm size with adjustable wall

[77] Providing and fixing 18MM TERMITE PROOF PLY 3.40 Sqm 18948.66

(GREENPLY OR EQUIVALENT) WITH BOTH SIDE

LAMINATE & PVC BEADING ON PERIPHERY and

Providing and Fixing Stainless Steel (Grade -316)

accessories, sheet cutlery basket (2 Nos) , Thali Basket

(2 Nos) , Plain Basket (2 nos) , Cup Saucer Basket (2

Nos) of size 520 x 485 x 100 mm fixing on telescopic

channel (GODREJ OR EQUIVALENT) having hardware

like handles, dead lock, magnet etc with fixing all

expose surface are decoartive laminate sheet and

other inner surfaces are 1.0 mm thick lamiate

including all necessary fixture and fastening (Steel

handle, hinges, stopper, chains and locking

arrangement etc. complete as directed by Engineer-in-

[78] Repairing to Door / Window including dissembling 7.00 Sqm 554.79

from frame, wroughting, providing patti, angles,

replacing / repairing stoppers - aldrops - handles etc.

for proper fixing in to frame hole etc. complete for

smooth operation and proper utilization including

assambeling and Refixing of the same and Painting

one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel

paint, to give an even shade including cleaning the of

all dirt, dust and other foreign matter. as directed by

Engineer-in-charge.

Description of Item

(with brief specification and reference to Quantity Unit Rate Amount

book of specifications)

[79] Providing and fixing Fly proof S. S. wire gauge of I.S.l 12.50 Sqm 1214.30

gauge designation 85 G. with wire of dia.0.56 mm to

windows and celevating windows including Anodized

Alluminum Section with allu. power coated fittings

and fixture etc complete.

[80] Providing and fixing Spout heavy duty of following 1.00 No. 1030.81

size Brass chromium plated (i) 15mm dia.

[81] Providing and Arranging book storage having top 18 4.00 No. 49462.88

mm thick MR grade plywood with 4.00 mm thick

veneer melamine polish finish with 0.8 mm balancing

laminate.Shelves made of 12 mm thick clear float glass

with all edge polish. Side and shutter made of 18mm

Total Rs.

I/We am/are willing to carry out the work at…..........… % above/below percent (Should be

written in figures and words) of the estimated rate mentioned above. Amount of my /our tender

works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

5. Credit of Dismantal Material amount of Rs. must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be

done as per statement attached with specification

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. R & B Sub Division Kheda R & B Division

Nadiad Nadiad