Renovation of Cafe Lalit Kufri Distt. Shimla (H.P)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:3 (1 cement :3 coarse sand) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 35 mm thick shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge Second class teak wood as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 150x10 mm bright finished brass tower bolts (barrel type) with necessary screws etc. complete of approved make as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Flora, Paragon or equivalent make)

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete of approved make as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 125 mm bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete of approved make as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Flora, Paragon or equivalent make)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m² as per the direction of Engineer-In-Charge of G.I. Sheet including carriage of materials within all leads, lifts and heights. (Tata Durashine or equivalent make)

20 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.