Maintenance of MCF/RRF in Kappolachira, Ward 11, General Civil work

Work Name:KSWMP-Vaikom Municipality- Maintenance of MCF/RRF in Kappolachira, Ward 11, Pr No- 417-Maintenance of MCF/RRF in Kappolachira, Ward 11, Pr No- 417-General Civil Work

杩‬楦楮桳湩Ⱨ攠敲瑣潩Ɱ攠瑲睨牯Ⱬ挠浥湥⁴潣据敲整ㄠ㈺㐺‬瑳畲瑣牵污猠整汥氠来‬瑩⁳慭湩整慮据⁥潦⁲慤慭敧ⱳ瀠楡瑮湩Ⱨ愠汬椠据摩湥慴獬‬慬潢牵洠瑡牥慩獬‬煥極浰湥獴愠摮眠牯獫爠煥極敲⁤潴攠數畣整⁤桴⁥潪⁢瑥⹣挠浯汰瑥ⱥ愠⁳数⁲桴⁥楤敲瑣湯漠⁦湅楧敮牥椠档牡敧ꐮ〳㈮㌮区灵汰楹杮愠摮猠慴正湩⁧汳摵敧愠⁴楳整椠据畬楤杮爠祯污祴愠摮挠牡楲条⁥灵潴㔠欠洮‮敬摡挠浯汰瑥⁥猨畬杤⁥敭獡牵摥椠瑳捡獫眠汩敢爠摥捵摥戠⁹┸映牯瀠祡敭瑮⸩挀浵æ㌀⸰⸲⸴㨱畓灰祬湩⁧湡⁤瑳捡楫杮愠⁴楳整搠浵⁰慭畮敲映潲灡牰癯摥猠畯捲ⱥ椠据畬楤杮挠牡楲条⁥灵潴㔠欠洮‮敬摡挠浯汰瑥⁥洨湡牵⁥敭獡牵摥椠瑳捡獫眠汩敢爠摥捵摥戠⁹┸映牯瀠祡敭瑮 区牣敥敮⁤桴潲杵⁨楳癥⁥景䤠匮‮敤楳湧瑡潩〲洠
〳㈮ㄮ⸴㨳楄杧湩⁧潨敬⁳湩漠摲湩牡⁹潳汩愠摮爠晥汩楬杮琠敨猠浡⁥楷桴琠敨攠捸癡瑡摥攠牡桴洠硩摥眠瑩⁨慭畮敲漠⁲汳摵敧椠桴⁥慲楴景㈠ㄺ戠⁹潶畬敭⠠′慰瑲⁳景猠慴正摥瘠汯浵⁥景攠牡桴愠瑦牥爠摥捵楴湯戠⁹〲‥›‱慰瑲漠⁦瑳捡敫⁤潶畬敭漠⁦慭畮敲愠瑦牥爠摥捵楴湯戠⁹┸ 汦潯楤杮眠瑩⁨慷整Ⱳ搠敲獳湩⁧湩汣摵湩⁧敲潭慶景爠扵楢桳愠摮猠牵汰獵攠牡桴‬晩愠祮‬楷桴愠汬氠慥獤愠摮氠晩獴⠠潣瑳漠⁦慭畮敲‬汳摵敧漠⁲硥牴⁡潧摯攠牡桴椠⁦敮摥摥琠敢瀠楡⁤潦⁲敳慰慲整祬 䠺汯獥㘠‰浣搠慩‬湡⁤〶挠敤灥栀汯獥õ㌀⸰⸲㜵㈮债慬瑮瑡潩景吠敲獥‬桓畲獢‬湡⁤效杤⁥瑡猠瑩⁥⽩⁣慷整楲杮愠摮爠浥癯污†景甠獮癡牥敩扡敬洠瑡牥慩㽬⁳獡瀠牥搠物捥楴湯漠⁦景楦散⁲湩挠慨杲⁥攨捸畬楤杮挠獡⁴景瀠慬瑮☠眠瑡牥⤠潃瑳漠⁦汰湡慴楴湯瀠牥匠牨扵⁳汰湡獴⠠潦⁲〲‰潮⹳㐽㜲㐮⼵〲⤰渀ꝯ䑏㜳㈲㌹㈯㈰ⴳ〲㐲区灵汰⁹湡⁤瑳捡楫杮漠⁦穁摡物捡瑨⁡湩楤慣⠠丠敥 汰湡⁴景栠楥桧⁴㈱ⴰ㌱挰湩戠杩਍潰祬慢⁧景猠穩⁥㔲挠獡瀠牥搠物捥楴湯漠⁦桴⁥景楦散⵲湩挭慨杲❥敒潮慶楴湯漠⁦䍍⁆‭敇敮慲楃楶潷歲び
㐱㐮ㄮ䴺歡湩⁧桴⁥灯湥湩⁧湩戠楲正洠獡湯祲椠据畬楤杮搠獩慭瑮楬杮椠汦潯⁲牯眠污獬戠⁹畣瑴湩⁧慭潳牮⁹湡⁤慭楫杮朠潯⁤桴⁥慤慭敧⁳潴眠污獬‬汦潯楲杮愠摮樠浡獢挠浯汰瑥ⱥ琠慭捴⁨硥獩楴杮猠牵慦散椠振搠獩潰慳景洠汵慢⼠爠扵楢桳琠桴⁥敮牡獥⁴畭楮楣慰畤灭湩⁧牧畯摮䘮牯搠潯⁲ 楷摮睯⼠挠敬敲瑳牯⁹楷摮睯猀浱Ü㄀⸵⸷㨴敄潭楬桳湩⁧牢捩潷歲洠湡慵汬⁹ 祢洠捥慨楮慣敭湡⁳湩汣摵湩⁧瑳捡楫杮漠⁦敳癲捩慥汢⁥慭整楲污愠摮搠獩潰慳景甠獮牥楶散扡敬洠瑡牥慩楷桴湩㔠‰敭牴獥氠慥⁤獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧䤮散敭瑮洠牯慴홲㔱ㄮ㨸楄浳湡汴湩⁧瑳敥潷歲椠畢汩⁴灵猠捥楴湯⁳湩愠杮敬ⱳ琠敥ⱳ映慬獴愠摮挠慨湮汥⁳湩汣摵湩⁧污畧獳瑥瀠慬整ⱳ潢瑬Ɽ渠瑵ⱳ挠瑵楴杮爠癩瑥ⱳ眠汥楤杮攠捴‮湩汣摵湩⁧楤浳浥敢楲杮愠摮猠慴正湩⁧楷桴湩㔠‰敭牴獥氠慥⹤欀豧㔱㈮⸸㨱楄浳湡汴湩⁧潲景湩⁧湩汣摵湩⁧楲杤獥‬楨獰‬敶汬祥⁳湡⁤畧瑴牥⁳瑥⹣‬湡⁤瑳捡楫杮琠敨洠瑡牥慩楷桴湩㔠‰敭牴獥氠慥⁤景㨠⹇⹓匠敨瑥«㄀⸵㘵䐺獩慭瑮楬杮漠摬瀠慬瑳牥漠⁲歳物楴杮爠歡湩⁧畯⁴潪湩獴愠摮挠敬湡湩⁧桴⁥畳晲捡⁥潦⁲汰獡整⁲湩汣摵湩⁧楤灳獯污漠⁦畲扢獩⁨潴琠敨搠浵楰杮朠潲湵⁤楷桴湩㔠‰敭牴獥氠慥⹤Í㄀⸵㈱ㄮ䐺獩慭瑮楬杮搠潯獲‬楷摮睯⁳湡⁤汣牥獥潴祲眠湩潤獷⠠瑳敥牯眠潯⁤ 桳瑵整⁲湩汣摵湩⁧档睯桫瑡ⱳ愠捲楨牴癡ⱥ栠汯晤獡獴攠捴‮潣灭敬整愠摮猠慴正湩⁧楷桴湩㔠‰敭牴獥氠慥㩤晏愠敲⁡″煳‮敭牴獥愠摮戠汥睯㄀⸴⸵㨱敒敮楷杮朠慬獳瀠湡獥‬楷桴瀠瑵祴愠摮渠楡獬眠敨敲敶⁲敮散獳牡⁹湩汣摵湩⁧慲正湩⁧畯⁴桴⁥汯⁤異瑴⁹䘺潬瑡朠慬獳瀠湡獥漠⁦桴捩湫獥⁳‴浭¡㔀⸰㐱ㄮ㈮刺浥癯湩⁧湡⁤敲楦楸杮眠湩潤⁷桳瑵整獲愠瑦牥渠捥獥慳祲爠灥楡獲映牯攠獡⁹灯湥湩⁧湡⁤汣獯湩⁧瑥⁣潣灭敬整愠⁳数⁲桴⁥楤敲瑣潩景猠瑩⁥湅楧敮牥椭⵮档牡敧ļ伀ㅄ㈱㜰⼷〲㐲㈭㈰㨵䑏删湥睥湩⁧桴⁥搠潯⁲牯眠湩潤⁷楦數⁤牦浡獥眠瑩⁨敮散獳牡⁹敲畱敲⁤慭整楲污⁳楬敫瀠瑵祴‬牰浩牥愠摮眠潯⁤楦汬牥攠捴‮湩汣摵湩⁧慲正湩⁧畯⁴桴⁥汯⁤異瑴⁹牯搠

true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.ãOD111961/2024-2025:Engaging man mazdor for shifting, dispossal of unserviceble material or repair of unserviceble material to make them serviceble as per the direction of engineer in charge including all necessary arrangements.ãOD122997/2024-2025:OD - FROM 100.54.3.1 Desilting open wells of dia 1.40 M inner dia and depth up to 4.5m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pumset of suitable capacity, lifting the excavated silt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools and plant and as per the directions of the department officers etc. complete. 9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames..Renovation of MCF - Gate for the compound wallé15.9.2:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortart
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil‡4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)5
OD121635/2024-2025:"OD Random rubble masonry with available hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)" 
50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.ï2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Î13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)l
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksøOD112340/2024-2025:OD Renewing or repairing the existing gates and openings to make the same as good and openable condition including with all necessary materials, labours and requirements complete as per the direction of Engineer-in-Charge. /Renovation of MCF - Plumbing and Sanitary works´
17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lidH
17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap ª50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.¥50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.Ð17.31:Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.¹50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
17.70.2:Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms’18.53.1:Providing and fix

ing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal borem18.49.1:Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal borer18.21.2.1:Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length15 mm nominal boreŠ18.18.3:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal borew18.19.1.2:Providing and fixing gun metal non-return valve of approved quality (screwed end): 25 mm nominal boreVertical
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Litre3
50.18.9.12.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall^
50.18.8.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm26
50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall6
50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall×50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2\
50.18.8.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2Q
50.18.8.8.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2Ö50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2w18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal boreÿ17.60.1.2:Providing and fixing trap of self cleansing design with screwed down or hinged grating without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 100 mm outletSand Cast Iron S & S as per IS : 1729Š
19.4.1.1:Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5`19.30.1.1:Constructing brick masonry chamber for underground C.I. inpection chamber and bends with bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5˜19.33:Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.B
51.19.ST4:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 4. 35 to 50 flush capacity 50.18.9.22.11:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling™50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee™50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl”50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend/
OD116181/2024-2025:Supply, erection, testing and commissioning of 1 HP submersible pumpset with all required accessories like controllers with ammeter,DPMCB for single phase 1 HP submersible motor pumps (DOL) etc. complete as per approved manufactures specifications and direction of engineer in charge.>Renovation of MCF - Water tank base structure and allied worksÖ10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.