Construction of Revenue Inspector (R.I) Office-cum-Residence at Dhamnagar, Ward No. 9 under Dhamnagar NAC in the District of Bhadrak

Single Under ream Pile File foundation of 375 mm dia with RCC - M25 grade using 20 mm & down graded size black hard granite chips including cost of boring but excluding cost of MS/Tor steel and labour charges for cutting, bending and binding of steel etc complete. as per direction of Engineer-in-charge.

Earth work in excavation in foundation in hard soil including earth mixed boulder(except sheet rocks and boulder requiring blasting) with all leas and lifts including dressing and levellingthe bed and depositing the excavated earth at places away fro the work site with all leads and lifts including all cost of all labour ,T & P & dewatering if required for the work etc.complete as per the specification and direction ofthe Enginer-in charge .

Providing , Filling manually with approed quality in foundation & plinth with sand well watered & rammed in 22.5 cm (9”) thick layers including watering and ramming with cost , conveyance royalty, taxes of the materials and labour T&P required for the work etc. complete as per specification and direction of Engineer-In-Charge.

Providing Cement concrete (1:3:6 ) using 40mm. size hard crusher broken grinite metal of approved quality from approved quarry in foundation and plinth including hoisting , lowering , laying in layers not exceeding 0.15mt. in thick , compacting , water curing with all cost, carriage, royalty, all taxes, labour & T. & P. etc. complete as per specification and direction of Engineer-In-Charge.

Fly ash brick masonry in cement mortar ( 1:6 ) having a crushing strength of not less than 75kg/cm2 including all necessary projections ,splays, cutting, circular moulding , curbelling , champering , watering , curing after immerging the bricks in nwater for six hours before use etc with all cost of materials,all materials for scafolding upto 5 mtr height , carriage, royalty,all taxes , labour, & T.&P. etc. complete, as per specification and direction of Engineer-in-charge (A) Foundation and Plinth (First Floor)

(B) Super Structure (1) Ground Floor )

(C ) 1st Floor

(D) 2nd Floor

Reinforcrced Cement concrete of M - 25 Grade with 20mm & down graded size crusher broken hard granite chips with centering & shuttering including cost, conveyance, royality, taxes, watering and curing etc. complete. in all respect as per direction of Engineer-in-charge. (A) PILE CAP

(B) PLINTH BEAM

(C ) Coulmn & Beam (1) Ground Floor )

(II ) 1 St Floor (Column Roof Beam )

(III ) 2nd Floor (Column Roof Beam )

(D ) Lintel (1) Ground Floor

(II) 1st Floor

(III) 2nd Floor

(E) Chajja (1) Ground Floor

(II) 1st Floor

(III) 2nd Floor

(F) Stair Case (1) Ground Floor

(II) 1st Floor

(G) Roof Slab (1) Ground Floor

(II) 1st Floor

(III) 2nd Floor

Supplying H.Y.S.D.bar with straightening the bent up coiled rods ,cutting , bending, cracking , hooking, welding or jointing ( if required) the M.S. rods or Tor steel and binding and , tying the grills with binding wire and , hoisting , lowering, and placing in proper position as required for R.C.C. works as per drawing and design with cost, conveyance and taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour with all T &P required for the work etc. complete in all all respect as per specification and direction of Engineer-in-Chief. (A) Ground Floor (I) Pile Cap

(ii) 1st Floor

(iIi) 2nd Floor

2.5cm.thick Grading concrete with C.C(1:2:2) using 6mm size BHG(C.B)chips of appd.quality from appd.quarry including ,laying .in uniform thickness and compacting concrete watering and curing etc.complete as per direction of Engineer-in-charge. (A) 1st Floor

(B) 2nd Floor

12mm thick Cement plaster in C.M(1:6)over brick workafter rackingout joint including watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.

12mm(1/2") thick cement plaster in C.M.(1:6) over out side the brick work including racking out the joints including watering ,curring and as safolding as required with cost of all materials ,carriage, royalty,all taxes, labour and T&P etc. complete, as per specification and direction of Engineer-in-Charge (A) Ground Floor

(B) 1st Floor

(C ) 2nd Floor

16mm (5/8") thick cement plaster (1:6) over in side brick wall after racking out the joints including watering , curing with cost , carriage, royalty of all materials , labour , T & P and scafolding as required etc. complete as per specification & direction of the Engineer-in charge . (A) Ground Floor (In Side)

(B) 1st Floor

(C ) 2nd Floor

6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment with cost, conveyance and royality of all materials and labour etc complete.as per specification & direction of the Engineer-in charge (A) GROUND FLOOR

(B) FIRST FLOOR

(C ) SECOND FLOOR

Supplying,fitting and fixing of Vetrfied tile in floors, treads and landings of size 600mmx600mm Coloured & Printed of approved make confirming to IS : 13755 laid on20 mm thick Cement Mortar (1:4) (1 Cement : 4Sand) and filling joints with white cement of approved quality including cost of all materials, labour, T&P etc required for the work all complete as per the direction of the Engineer-in-charge. (A ) GROUND FLOOR

(B) FIRST FLOOR

Supplying, fitting and fixing vitrified tile 600x600 mm size (Coloured & Printed) in dadoos, skirtings and riser of steps on 12 mm thick bed of cement mortar 1:3(1 cement: 3 sand) jointed neat cement slury mixed with pigment to with match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.

Supplying, fitting and fixing vitrified Industrial tile of 300mm x 300mm size in dadoos, skirtings and riser of steps on12 mm thick bed of cement mortar 1:3(1 cement: 3 sand) jointed neat cement slury mixed with pigment to with match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete. (A) GROUND FLOOR

(B) FIRST FLOOR

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials etc complete. (A) GROUND FLOOR

(B) 1st Floor

(C ) 2nd Floor

Wall painting two coats with any approved with Weather Coat to new work over a coat of primer including cost of paint sand papering polishing the surface including all labour charges cost and conveyance of all materials royalities taxes and cost with T & P etc.complete in all respect as per specification and direction of the Engineer-in- charge (1) GROUND FLOOR

(B) 1st Floor

(C ) 2nd Floor

Painting two coats to wall surface with approved plastic emulsion paint of appd.shade including all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge. (A) Ground Floor

(B) 1st Floor

(C ) 2nd Floor

Dessed seasoned Sal wood work (Wrought and put up) for Door and window Choukaths etc. completed with iron fittings and wooded hinged cleats etc. fixed in position including all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge. (A) Ground Floor

(B) 1st Floor

Providing fitting and fixing 32mm thick Piasal wood or local teak wood pannelled / Glazed shutters for doors and windows including mending and cutting sizes of grooves in choukaths for over lapping portion of the shutter where necessary fitting and fixing wooden hinged cleats fitted in position including all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge. (A) Ground Floor

(B) 1st Floor

Supplying fitting and fixing of M.S.Grills, Grill gate, M.S.Gates, M.S.door, M.S.Angle , M.S.Shutter with Choukaaths ,Collapsible gates with top and bottom rails,steeel windows critical frames for windows ,staircase and parapet railing made out of M.S.Square bar / flat including .as per approved drawing and design with cost of all materials and labour, taxes, labour cess, T&P sundries etc.complete in all respect as per specification and direction of the Engineer-in-charge. (A) 2nd Follr

Labour for fitting & Fixing of M.S. Gate as per approcved design including cost of all materials etc.complete as per direction of Engineer-in-charge. ALL Foors

Painting two coats with enamel paint of appd. shade Door/window over wood / Iron work over a coat of primer including all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge. (A) Ground Floor

(B) 1st Floor

( C) 2nd Floor

Providing fitting and fixing of Window (Sliding type)made of Allu. Section as window frame section No.151-155-151-153- and 151-167 as shutter with 5mm thick black glass as panel fitted with rubber beading including locking arrangement with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge. (A) Ground Floor

(B) 1st Floor

Providing for supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of 32mmx32mmx2mm @ 0.90 mtr.C/C and stainless square pipe bracings of size 32mmx32mmx2mm in three row in stair case as for and specification butting polishing etc. approvede design including all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.

Earthwork in excavation in hard soil or gravely soil (Mechanical means) within 50M. initial lead and 1.5m. to 7cm in initial lift including rough dressing and breacking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth . etc.complete as per direction of Engineer-in-charge.

EIRecessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Raw power switchboard shall be separate from emergency switch board.Each light point should have provision for ceiling rose and angle holder point. Light Point GROUP-A

Light Point GROUP-B

Light Point GROUP-C

Fan Point GROUP-B

Fan Point GROUP-C

Exhaust Fan Point GROUP-C

Call Bell Point GROUP-C

Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit . (2X6+1X1.5)

Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

S/F of Computer Board Consisting 3 Nos of 5Amp 5Pin 240V F.T. socket and Switch ISI marked on M.S Board with all connection complete in all respect as per direction of Engineer in charge -(Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) )

Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- legrand Myrius /Schneider(Zencelo)/Panasonic(Vision) , A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

S/F of Bakelite angle holder/batten holder (Make: legrand Myrius /Schneider(Zencelo)/Panasonic(Vision))of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand Myrius /Schneider(Zencelo)/Panasonic(Vision))

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make:panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro). The luminaire should be Replacement Warranty will be 2 years .

Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years (for common load)

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.

Supplying and fixing 63 amps rating, 240 volts, C series,10KA breaking capacity, double poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.

Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.

S/IT/C of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.

Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.

Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.

Supply and fixing of 36 watt LED street light (Make-Havells/ Cromption/ wipro/ panasonic/ Philips)

Supply Of 1.5Ton Split Type A.C Machine ( 5 Star ) ( Make- Carrier / Voltas/ Blue star )

S/F of 5 KVA Voltage Stabiliser ( 130 Volt-300 Volt ) ( Make- V-Guard / Voltas/ )

Installation Charges OF Split Type A.C Machine

S//F of Copper Colling Pipe with Insullation Packing and Fexible Copper Cable

S/F of Nylon Netted Drain Pipe With C Clamp

S/F of Powder Coated Wall Stand with Anchor Faster (For 2 Ton )

Supply & Fixing Of 220 AH inverter Batterywith all Connection & acessoseries(Make-Luminous/exide/Microtek)

Supply & Fixing of 2.3 KW Inverter Machinewith all Connection & acessoseries (Make-Luminous/exide/Microtek)

Supply and installation of 63Amp ICDP main switches with MS board

PH Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge (Supreme/Ashirvad/Oriplast/Shaakya) In Gr ffloor-20mm dia C-PVC Pipe

25mm dia C-PVC Pipe

25mm dia PVC-ASTM(Sch.-80) Pipe

32mm dia PVC-ASTM(Sch.-80) Pipe

In 1st floor 20mm dia C-PVC Pipe

25mm dia C-PVC Pipe

25mm dia PVC-ASTM(Sch.-80) Pipe.

32mm dia PVC-ASTM(Sch.-80) Pipe

In 2nd floor 25mm dia PVC-ASTM(Sch.-80) Pipe.

32mm dia PVC-ASTM(Sch.-80) Pipe

Supplying all materials,labour,T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc.all complete as per PH specification and direction of the Engineer-in-charge.

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge.

Supplying all materials , labour, T&P and cutting grooves in pucca floors and walls for taking P.V.C pipes and G.I fittings etc. and making good the damages including finishing complete as per P.H. specification and direction of Engineer-in-charge. In Gr floor

In 1st floor

Supplying all materials , labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materials complete as per P.H. specification and direction of Engineer-in-charge 15mm dia CP bib cock (Plaza/Amber/Aquatic/Somany/Cera/Kerovit/Hydro)

15mm dia CP Long body bib cock(Plaza/Amber/Aquatic/Somany/Cera/Kerovit/Hydro)

15mm dia CP angle stop cock(Plaza/Amber/Aquatic/Somany/Cera/Kerovit/Hydro)

20mm dia CP Concealed stop cock(Plaza/Amber/Aquatic/Somany/Cera/Kerovit/Hydro)

15mm dia CP two Way bib cock(Plaza/Amber/Aquatic/Somany/Cera/Kerovit/Hydro)

15mm dia CP Health faucet (Plaza/Amber/Aquatic/Somany/Cera/Kerovit/Hydro)

25mm dia Grass or G.M. Full way Valve

32mm dia Grass or G.M. Full way Valve

15mm dia Extension Piece

15mm dia CP Flange

125mm dia. CP grating

15mm dia CP Pillar cock -long neck (Plaza/Amber/Aquatic/Somany/Cera/Kerovit/Hydro)

32mm dia PVC waste pipe with brass coupling nut

Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc.all complete as per specification and direction of Engineer-in-charge 15mm CP Revolving shower with shower Arm(Plaza/Amber/Aquatic/Somany/Cera/Kerovit/Hydro)

Supplying all materials ,labour ,T&P and fixing 10 litres capacity PVC low level flushing cistern with a pair of PVC brackets complete with fittings such as pvc siphonic arrangements, 15mm dia nominal size pvc ball valve with polythene float ,pvc handles, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet , and connecting the inlet pipe with supply main etc.all complete as per specification and direction of Engineer-in-charge10 ltrs. capacity PVC L.L cistern (Slimline- Deluxe-white-Parryware)

Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips including centering and shuttering, watering, curing , cost of all materials, conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge.( Sintex/Supreem/Rotomax) 2000 ltrs capacity rotational moulded polyethylene cylindrical vertical water storage tank .In 2nd floor

Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge. (Supreme/Ashirvad/Oriplast/Shaakya) 110mm dia U-PVC SWR Pipe

75mm dia U-PVC SWR Pipe

110mm dia U-PVC Door Tee

110mm dia U-PVC Plain Tee

110mm dia U-PVC Door Cross Tee

110mm dia U-PVC Door Bend

110mm dia U-PVC Plain Bend

110mm dia U-PVC Plain Shoe Bend

110mm dia U-PVC 'S'Trap

110mm dia U-PVC Offset without ear

110mm dia U-PVC Socket plain

110mm dia U-PVC Cowl

Fixing 100mmx100mmx100mm SW Tee

Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30 mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge580mmx440mm size Orissa Pan ( White )(Parryware/Hindware/Somany/Cera/Kerovit)

Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina washed down water Closet (European type water closet - EWC) with integral "P" or "S" type trap to the floor including wodden plug and chromoum plated screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat cover for washed down water closet with crmium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of Engineer-in-charge.European Water Clost with seat cover(Parryware/Hindware/Somany/Cera/Kerovit)

Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-chargeWash hand basin with Porcelain pedestall .(Hinware/Parryware or equivalent make)

Fixing 550mmx400mm size wash hand basin .(Hinware/Parryware or equivalent make)

Supplying all materials ,labour ,T&P and fixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification and direction of Engineer-in-chargeFixing 600mmx450mm size B.E mirror (fixed type)

600mmx125mm size glass shelf with C.P/NP guard rail

Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel rail complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-chargeFixing 25mmx600mm long CP towel rail

C P Towel Ring.

Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-chargeCP soap holder

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge.600x450x250 mm stainless steel kitchen sink -glossy-IS:13983 - 1994 (Jayna make

CIVIL WORk- Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge In ground floor

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.In ground floor

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. In GR Floor

1st Floor

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. In Gr. Floor

1st Floor

Supplying all materials, labour, T&P and providing and fixing of porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.Glazed tile 40cmx25cm Kajaria/Somany/Johnson premium or equivalent. Gr. Floor

In 1st floor

Supplying all materials, labour, T&P and providing and fixing of porcelain tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge .Ceramic tile 30cmx30cm Kajaria super premium /Somany/Johnson premium or equivalent . Gr. Floor

In 1st floor

Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)

Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.GF & 1st.Floor

Supplying all materials, labour, T&P and providing plastic emulsion paint 2 coats including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.1st floor

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in chargeGully trap chamber of size 250mmx250mm with R.C.C cover slab

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInspection chamber Inside size 760mmx760mmx 460mm

Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeMan hole chamber inside size 900mmx900mm and 900mm deep

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeBrick masonry soakway pit 1.20m dia x 2.00m deep

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete

CONSTRUCTION OF 10 USERS SEPTIC TANK-:(1 nos)-Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including cost,conveyance of all material to work site payment of royalty,taxes etc all complete as per the direction of Engineer-in-Charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. 3.06*1.96*0.10=

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In Super structure

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. R.C.C floor and roof slabs.

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. @0.8/Cum

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. 2.03mx1.28mx0.10m=

Supplying all materials, labour, T&P and providing,fitting and fixing 150mm x 150mm x 150mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge.

Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Cooler-cum-Purifier of size (700x430x460mm ht) with water cooling capacity of 40 PPH with contineously flow with one faucet having option for cold water and normal water etc.with internal water supply connection complete as per direction of the Engineer-in-charge.

Stainless steel stand for (Aqua guard)

Supplying , fitting and fixing of 1.00 HP Centrifugal single phase Pump motor all complete as per approved specification and direction of the Engineer in charge.

2.50sqmm flat cable