SPL REPAIRS TO BLDG NO T-13-15A AT HQ 4 CORPS CAMP, PROVN OF FIRE ALAM, 30 KVA VOLTAGE STABILIZER AND LIGHTENING ARRESTER IN IT SEC AT 5 TAC AF AND PROVN OF COVERED SHED 4.5 x 3.5 METER NEAR HQ 4 CORPS OFFRS MESS UNDER GE (S) TEZPUR

Amount

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.All as specified and as directed by Engineer-in-charge.

Excavation in trenches n. exc 1.5 metre wide and not exceeding 1.5 metre in depth; for for foundations etc or for shafts, wells, cesspits, manholes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified & directed by Engineer-in-charge .

Excavation in post holes each n.exc 0.5Cum getting out in soft loose soils, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm and removing surplus soil to ad distance n.exc 50m and making good surface.All as specified and as directed by Engineer-in-charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed by Engineer-in-charge.

Removing excavated materials n.exc 50m and deposited aa level n.exc 1.50m in soils above the starting point.All as specified and as directed by Engineer-in-charge.

M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall. All as specified and as directed by Engineer-in-charge.

Sand Filling under floors/cushion,under cable or in foundations including watering and consolidation as directed by Engr -in-Chrage.

M/L for Hard core of guage not exc 63mm with broken stone deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface.All as specified and as directed by Engineer-in-charge.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick in sub base complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0(12.5mm graded aggregate) as in flooring finished even and smooth without using extra cement.All as specified and as directed by Engineer-in-charge.

Cement concrete in foundations , filling and mass concrete type D-2, 1:4:8 all as specified and directed.All as specified and as directed by Engineer-in-charge.

S&F steel work in tubular truss & vertical post of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.

S&F rolled sections as in main cress beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or connecting plates cofirming to Fe-410-w (Gde-E250) quality-A

S&F for MS plates as in cleats, base plates, purline etc of Gde Fe-410-W(gde-E-250)

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.All as specified and as directed by Engineer-in-charge.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work

All as per Ser Itme no 16 above but In fillests, rails , posts, refters and purlins etc under 40 sqcm in section unframed work

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters

Dismanting timber boarding of any description fixed in any position

Demolition of reed lathing, single or double including battens and plasters or checken wire lathing

Dismantling floor hearth wall tiling incl cement mortar bededing(but not backing),

Demolition of brickwork or stone/boulder masonry, built in cement mortar all as directed.

M&L for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

M&L for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radiushalf brick wall built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) complete all as directed

M&L reinforced cement concrete Type B1 (1:2:4) (20mm graded aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings balconies, canopies, eck slab and in shelves and the like all a specified and diredted

Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) all as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each

Taking down of shutters of any description n.exc 1.00 Sqm and each

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.

S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550Mpa as in roof covering including end of creep length 200 mm to 250 mm etc fixed with self tapping screw as specified. Note :-Creep length shall be measured and paid in the same item.

All as per item No 34 above but plain sheet for ridge ,gutter,gutter etc fixed with self tapping screws as specified.

M&L 2nd class HW in scantling fixed clean swan in framed work or unframed work all as specified and directed

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 15mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing All as specified and as directed by Engineer-in-charge.

M&L for Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing All as specified and as directed by Engineer-in-charge.

S&F non skid eramic coloured tiles 7 to 8mm thick square/rectangular)area of each tile esceeding 0.18 Sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointd in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:4) complete all as specified and directed.

Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.All as specified and as directed by Engineer-in-charge.

M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F in repairs Vitreous China wash basin, white, flat back, size 580x400 including pedestal excluding taps, waste, chain and plug and porcelain stoppe but including brackets complete all as specified and directed

M&L for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

S&F in repairs 15mm dia stop valve fancy type chromium plated with long shank and cup (conealed rype) screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F Pillar taps, 15mm bore fancy type ,chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

Taking up or down 15 mm steel tuping and connection, including cleaning for re fixing or removal to strore

M&L for laying 15mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors complete all as specified and directed

Taking up or down 20mm steel tubing and connections including cleaning for re fixing or removal to store.

M&L for laying 20mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors

Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement.All as specified and as directed by Engineer-in-charge.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as chowkhat complete as per manufacturer instruction.

S&F 35mm thick 2nd class hard wood factory made flush shutter solid core construction with block board core and plywood face panels commercial type of both side.All as specified and as directed by Engineer-in-charge.

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter open rebated and prepared to receive glass, gauze etc (without sash bars) edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Pt I clasue 8.24 (a) .All as specified and as directed by Engineer-in-charge.

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : wire cloth wil be measured and paid separately).All as specified and as directed by Engineer-in-charge.

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass wil be measured and paid separately).All as specified and as directed by Engineer-in-charge.

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each

S&F 100mm Butt hinges medium weight cold rolled mild steel

S&F 75mm Butt hinges medium weight cold rolled mild steel

S&F MS 300mm ordinary rat tail rod pattern spring including roller and roller plate

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.

S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M&L 15mm thick rendering in CM (1:4) on one side of lathing finishedd even and smooth without using extra cement including 0.71mm chicken wire and size of mesh 12mm

M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and smooth without using extra cement

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and smooth without using extra cement .

M & L Rendering 15mm thick on surface of brick work/concrete surface in CM 1:6 and is to be finished even and fair without using extra cement complete all as specified and as directed.

S&F Solid wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified and directed

Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.

M&L Applying two coats of Oil bound distember to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of Oil bound distember to wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L for complete removal of existing treatment of external walls along with preparation of wall surface using wall care putty and applying two coat of apex/ weather coat water proofing paints over two coats of approved paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

M&L for Newly plastered surfaces of external wall and applying two coats of apex /weather coat paints over two coats of approved Paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.2 mtr & filled with bituminous filler complete all as specified and as directed.

Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 110mm bore.

All as per item no 95 but 75mm bore.

S&F in repair PVC (SWR) pipes 75mm single socketed in any length with rubberring joints laid in trenches or in floors

S&F in repair PVC (SWR) pipes 110mm single socketed in any length with rubberring joints laid in trenches or in floors

S&F in repair PVC (SWR) bends any radius 75mm bore.

S&F in repair PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore.

S&F in repair PVC (SWR) bends any radius 110 mm bore.

S& in repair FPVC (SWR) junction single (single 'T') equal or unequal 110mm bore.

M&L preparing surfaces at wood & wood based materials new or old at any description & girth not otherwise described & treated with tar or coal tar black paint

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of 140mm fixed with screwes all as apecified and directed.

Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc complete as specified.

M & L for taking down fans ceiling cable ends dismantling blades and removing fan and keeping in safe custody for reuse.

Taking down old U/S LED light fittings any type and size

M & L for point wiring for one light point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC Casing Capping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and complete with modular pressed steel tarminal box and front cover plate to mount modular switch, sockets, regulators etc fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as modular type with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed. Note: Cost of modular box, modular front and back plate are including in rate of point wiring.

All as per Ser item No.115 above but for 5 amps socket on same board with other switches

All as per Ser item No.115 above but for 5 amps socket on independent board.

All as per Ser item No.115 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

S&F of modular switch flush type, 6 Amp. SP, one way ,1 module all as directed specified. Make- Anchor/ Havells/Bajaj/ CG

S&F of modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair of modular socket outlet, 3 pin, 6/16 Amp flush type 2 module with modular switch, 16 Amp flush type 1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.

S&F of modular Fan Regulator step type 2 module ,120W all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

Supply and fix Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FRLS, copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC concealed conduit with all fittings and accessories including PVC box (IS-14772) and 1 X 2.5 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly.

All as per Ser item No.124 above but 2x6.0 sqmm+1x4.0sqmm earth wire

S&F PVC angular holder polycarbonate as specified and directed.

Supply and fixing wall mounting industirial socket incl top plug with suitable straight plug, 380 to 415 volts, TPN, 4 poles (3P+N+E) , 32 Amps, Tempra Pro IP 67 to used as 3 phase industrial load mounting on suitable size of wooden box fixing on suface of wall complete all as specified and directed. M

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.

Taking down old Unsv MCB/MCCB/RCBOs of any type & any capacity complete all as specified and directed

S & F MCB SP 6 to 32 Amp,C series , 230 Volts complete all as specified and directed . Make - L&T/Havells/C&S/legrand/hager.

S & F MCB DP 6 to 32 Amps, C series, 230 Volts complete all as specified and directed . Make - Standard/Havells/C&S

S & F MCB TPN 40-63 10 KA "C" series 415 Volt complete all as specified and directed. Make : L&T/Standard/Havells

S & F Power line vertical type TPN DB double door 4 way, IP 43 suitable for MCCB 100 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed. make- L&T/Havells/C&S/legrand/hager.

S & F MCCB 4 Pole 415V Fixed type 25-100A with breaking capicity 16 KA complete all as specified and directed. Make : L&T/Standard/Havells

M&L for painting to ceiling / exhaust fan in two coats over one coat of red oxide primer using syenthetic enamel paint after washing with casting soda water ,scarping to old paint, cleaning etc and identy marking by different colour as per exisiting complete all as specified and directed. Note :- Colour of paint shall be approved by Engr-in- charge.

S& F ceiling fan of sweep not less than 1200mm with hanger in replacement of existed old vintage unseviceable ceiling fan as specified and directed. Make- Crompton/Havells/Bajaj

S&F in repair exhaust fan size of sweep not less than 300 mm copper wounded winding energy saving single phase, 230 volts, 50 HZs with louver, set of sweep and all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply and fix in repair , wall mounting fan size of sweep not less than 450 mm heavy duty energy saving single phase, 230 volts, 50 HZs complete all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Taking up earthing complete all as specified and as directed.

Material and labour for earthing complete with copper earth plate electrode 600cm x 600 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to copper strip 25x4 mm as earthing lead by means of bolts, nuts and washers, check nuts made out of copper all as shown on electrical plate No.5 of SSR Part-I connected to earthing test point complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm buried directly in ground vertical to a depth not less then 2.25 mtr below ground level with the top edge of earth plate at a depth of not less then 1.5 mtr below normal ground level using GI earth strip in size 25x4 mm connecting to TPN main DB by means of nuts bolts and washers etc. made out of galvanised iron and GI wire connected to main DBs including necessary excavation earth work PCC (1:3:6) type C1 using 20 mm graded stone aggregate earth chamber 40mm thick RCC cover with PCC (1:2:4) type B1 using 20 mm graded stone aggregate 20 mm dia GI medium grade watering pipe and 40 mm for strip, funnel, protection pipe, adequate quantity of common salt, charcoal etc. and connecting up to main sub panel complete all as specified and shown in electrical plate No. 3 of MES Sch Part - 1 complete all specified and directed.

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10 W/9W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS9WLED865SPCWH

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS20WLED865SPCWH

S&F in replacement road/ security light/bldg light with high power LED fitting as light source ,energy saving envoirmental friendly 30 W with advance features all as complete with fixing arrangement such as GI pipe brakets bend in 120 degree, clamps made out by GI strip suitable for steel or PCC poles, nuts ,bolts and washer to be fixing incl making all eclectrical connection with three core flexible copper cable etc specified and directed. Make ; Century LED LTD Coad-SPFL030C in

Supply and fixing in replacement of LED ADORE Lamps 15 W B22 CDL OF 3 STAR Rating including lumen output 1425 (lm) of BALL LAMP for cool day light complete. Make - Havells cat No. LHLDDEEEML8R015

Supply and fixing in replacement of LED ADORE Lamps 10 W E27 CDL OF 3 STAR Rating including lumen output 950 (lm) of BALL LAMP for cool day light complete. Make - Havells cat No. LHLDEUHEML8R010

Supply and fixing in replacement of LED ADORE Lamps 7 W B22 CDL OF 3 STAR Rating including lumen output 700 (lm) of BALL LAMP for cool day light complete. Make - Havells cat No. LHLDEUEEML8R007

Supply and fixing in repair water heater (Geyser) storage type, single phase, energy saving 5 star rated 230 volts grade 25 Ltrs storage capacity complete with fixing accessories.

Supply and fixing recessed dust free LED fitting 24 watts soft light glare free homogenous illumination very high efficiency enviormental friendly long life of suitable for T- grid celing and modular celing application complete making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :- Indiabulls Cat No- IMRC01-24XXGEN2 or equivelent Havells all as specified and directed by EIC.

M&L for taking up to LT UG cable in all grade/ core/type/make etc after removing connection complete all as directed.

M&L for galvanised steel tubing in light grade bore 40 mm with all fitting laid in trenches/ fixed with wall/ pole using fixing accessories all as site complete directed by Engr-in-charge. Make - Tata/ Jindal/ NTL

M&L for sub class 'B' brick for protection of UG cable in tranches of old size brick all as specified and directed by Engineer-in-charge.

Supply and fix GI pipe of dia 25mm to wall/Pole of medium grade with required clamping arrangements to fix with the pole complete and connecting to the existing pipe line all as specified Make : JINDAL/TATA

Supply and fix new gun metal gate valve of dia 25mm with iron wheel all as specified and directed for the following sizes Make: TATA / JINDAL

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified.

S & F double layered Rotational moulded polyethylene water storage tanks 1000ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. Make- Sintex Note- The cost of connecting inlet and outlet water tube is deemed to be included in the unit rate.

M & L angle iron Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

Supply install , testing , commissioning and connecting of automatic Voltage stabilizer servo control for automatic operation, three phase naturally oil cooled , copper wounded indoor type & designed for input variation between 340 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 30 KVA including mounting of roller wheel with factory made GI frame complete all as specified and directed. Note : Qtoted rate shall be included for initial oil filling. Make : AE/Volina/Cropmton graves

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core (Pole to in commer feeder + Voltage Stabilizer to LT panel)

All as per Item No 160 above but in size 35 Sqmm x 3.5 core (LT panel to Bldg Change over switch)

All as per Item No 160 above but in size 25 Sqmm x 4 core (LT panel to IT Sec Bldg DB)

Supply and fixing on load change over switch 4 pole, TPN cap 63 Amps in sheet metal enclosure complete.

M&L for digiging / excavation / boring hole to drawn through GI pipe light graded 80 mm bore of dai minium deep 60 cm below normal ground level of hard standing/ parh/ colvert / RCC road etc as site for passing LT cable and repair as same matching all with exsiting surface complete all as directed.

Supplying, installation, testing and commissioning electric motor siren conforming to IS 1941 suitable for three phase 415 V supply with motor not exceeding 3.75 KW power and able to deliver 143 DB noise level. including necessary foundation and protection from Rain/weather of range 2 km 3 phase 415 volts (installed at roof) complete all as specified.

Supply & fixing control cable PVC insulated and FRLS sheathed cable with multi stranded copper conductor of size 2.5 Sqmm 2 core 1 x 1.0 sqmm as earth wire 220V/ 440 volt grade confirmed to IS 1554 for connections of fire alarms, hooters smoke detectors and control panel all as required.

S&F in position MS conduit 25 mm dia of 16SWG including all necessary accessories i.e Tees, bends, elbows, reducers bell mounth tube ends etc. concealed in Wall/false ceiling on surfave as requireed including MS junction box with 3 mm thick bakelite sheet top cover wherever required complete all as specified.

M&L fire alarm control panel complying with BSEN 54 single loop pannel of capacity from 99 detectors and 99 modules upto 200 detector and modules including UPS / Batteries

M&L, installation, testing and comissioning detectors complying with and type certified to EN 45 addresable type microprocessor based programmable intelligent type multi-sensor heat and smoke combination detector photoelectric/ Optical with base with self built intelligence as per IS: 11360 complete all as specified and as directed.

M&L addressable control module.

M&L addressable monitor module

M&L addressable mannual call point resettable type.

M&L addressable electronic sounder cum strobe

M&L short circuit isolator

M&L Explosiveproof manual call point (add up control module)

M&L Remote response indicators

Chemical earthing complete with copper earth electrode 60 cms x 60 cms, 5mm thick buried in ground surrounded by charcoal salt magnesium sulphate as directed ie alternate layers of salt and coal upto 2.40 metre & 50 mm thick layer of magnesium (earth pit not less than 3.80 metre deep below normal ground level ) with top edge of the plate not less than 2.25 metre below normal ground level connected to copper earth strip of size 32 x 6.00 mm by brazing and connected to earth test point including 25 mm bore GI tubing light grade for protection of copper strip and 40 mm bore GI tubing medium grade for watering complete including funnel & wire mesh. Earth pit shall be provided using PCC 1: 3: 6 type C-1 with CI cover all as shown in electrical plate No 3 of SSR Part-I. ( PCC pit shall be made at side from earth filling). Earthing shall be tested on completion complete all as directed by Engineer-in-ChargeNote : Unit rate quoted includes necessary excavation earth work and disposal of surplus soil complete all as directed by Engineer in Charge Note :- 1. The earth resistant value must be well below of 1 Ohm irrespective to seasons and any unforeseen condition.

Material and labour for test point terminal block made of gun metal or phosphorus bronze size 75 X75X25 mm drilled and screwed including 3 nos.8 mm dia 25 mm long hex.head screw

M&L for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate in foundation , including necessary from works and air finish to exposed surfaces without using extra cement complete all as specified.

Earth continuity conductor or main earthing lead of size 32x6mm thick copper earth strip fixed to wall / on batten or recess or by cutting chases or burries in ground or drawn in conduit / pipe fixed to or any other indicated situation for loop earthing including saddles / clamps/ nut bolts and thimbles etc as required complete all as specified and directed by Engineer-in-charge.

S&F of KALRE- 60 (Class A- E.S.E) which is an active lightning conductor designed to conform to the french standerd NF C 17-102 ^ T: 60 us (jul 1995) for ESC lightning conductors. Its working principle evolves from local electrostatic field that develops nuturally around the system as the thunderstorm begins to gather. in the event of descending lightning, an inbuilt triggering device generates high tension pulses at the conductor tip, causing a 'corna effect' protection radius of 79 mtr at level 1 & 107 mtr at level 4. Note- including installation lightning arrester accessories like fastners, U clamps, ring fastners and staywire ESE Flang etc.

S&F self powered non resettable lightning event counter (6 digit) weather proof enclosure of mounted on down conductor in IP 65 enclosure with minimum sensitivity 1 kA for 8/20 us puls.

S&F Bakelite insulator for insttaled to between LA and GI pipe mast

S&F 5 mtr Mast with base plate and supporting as per standards

S&F 70 sqmm SC flexible insulated copper cable

M&L of earth electrode of copper bonded Rod diameter -17.2mm length of rod 3 mtr long, EIRC- earth Enhancing compound in 30 Kg bag one no with clamp , accessories like fasteners, U clamps, ring fastener and staywire etc Note- including installation charge. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/S J.C Medhi

D G Corporation

Anil Kumar Sarmah

M/S Deep-Jeet

Sibson Constructions And Co

M/S MOHANPASARI

M/S Manjit Singh

AVASANA SOLUTIONS PRIVATE LIMITED