Construction of Nagarpalika Library at Patdi, Dist. Surendranagar (Third Attempt)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Twenty Eight

Clearing and grubbing road land including uprooting rank vegetation

Thousand Three

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

1 Hectare 0.13 28,393.04 Hundred Ninety

stumps of trees cut earlier and disposal of unserviceable materials (C) By

Three Rupees

mechanical means in area of light jungle

Four Paise

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. Four Hundred

including shoring, strutting dewatering as necessary and disposing of the Eighty Six Rupees

excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto 100m Seventy Seven

for 10 Cum Paise

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. Five Hundred

including shoring, strutting dewatering as necessary and disposing of the Seventy One

excavated stuff as directed.(B) Depth from 3.0 to 6.0 M.and lead upto Rupees Eight

100m for 10 Cum Paise

Four Hundred

Filling in plinth and foundation with sand under floors including Twenty Four

watering ramming, consolidating and dressing complete Rupees Ninty

5 20cm. thickness including watering, ramming and consolidating etc. Cmt 311.70 282.02 Eighty Two

complete. (more than 10 ton) Rupees Two Paise

Filling available excavated earth (excluding rock) in trenches. One Hundred

6 plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth Cmt 519.20 130.39 Thirty Rupees

consolidating each disposited layer by ramming and watering. Thirty Nine Paise

One Thousand

Providing and filling rubbles including hand packing and filling interstices

7 Cmt 59.80 1,064.80 Sixty Four Rupees

with quarry spalls behind abutments and between returns as directed.

Eighty Paise

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including

labour and material consistent with I.S.I specification. Using Chlordane

and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one

Fifty Six Rupees

8 percent is recommended i.e one liter 20 EC chemical emulsion with 19 Smt. 275.70 56.63

Sixty Three Paise

liter give 1 % concentration inclusive of one liter chemical emulsion

application at the rate of 5 Liter chemical/ Sqm of surface is

recommended as per I.S. (The Product performance shall carry

Guarantee for 10 years)

Three Thousand

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

Six Hundred Thirty

9 4- graded stone aggregates 20 mm nominal size) and curing complete Cmt 150.60 3,631.49

One Rupees Forty

excluding cost of formwork in (A) Foundation and Plinth

Nine Paise

Three Thousand

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : Nine Hundred

10 6- crushed stone aggregates 20 mm nominal size) and curing complete Cmt 0.00 3,974.36 Seventy Four -

including cost of formwork in (A) Wall Caps / Coping Rupees Thirty Six

GRADE SLAB (M200) : Providing and laying controlled cement concrete

Four Thousand Six

M.200 Concrete with all lead, including all transportation, pumping,

Hundred Sixty

11 pouring, curing of concrete etc complete including the cost of formwork Cmt. 39.50 4,662.11

Two Rupees

but excluding the cost of reinforcement for reinforced concrete work in

Eleven Paise

M200 Grade Slab

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Four Thousand Six

vibrator curing centering & shuttering in true line and level etc, but Hundred Twenty

excluding the cost of reinforcement for RCC work in Foundations Six Rupees Eighty

footings, base of columns and Raft etc., for any type of cross section area One Paise

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

Six Thousand Five

complete including cost of necessary, form work, compacting with

Hundred Seventy

13 vibrator curing centering & shuttering in true line and level etc, but Cmt. 10.50 6,579.14

Nine Rupees

excluding the cost of reinforcement for RCC work in column up to plinth

Fourteen Paise

lvl. etc., for any type of cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand Five

vibrator curing centering & shuttering in true line and level etc, but Hundred Four

excluding the cost of reinforcement for RCC work in TIE, GROUND, & Rupees Forty

PLINTH BEAMS for any type of cross sectional area. etc., complete as Paise

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but Five Hundred

15 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical Cmt. 28.70 7,597.52 Ninety Seven

and horizontal fins)., & (F1) Wall cap & coping up to G.F. level., etc. Rupees Fifty Two

Complete, as per detailed & directed by Architect / Consultant & and Paise

directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but

Six Hundred Thirty

16 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical Cmt. 2.70 7,637.82

Seven Rupees

and horizontal fins)., & (F1) Wall cap & coping For First Floor level., etc.

Eighty Two Paise

Complete, as per detailed & directed by Architect / Consultant & and

directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but

Six Hundred

17 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical Cmt. 0.40 7,678.02

Seventy Eight

and horizontal fins) & (F1) Wall cap & coping For For Second Floor level.,

Rupees Two Paise

etc. Complete, as per detailed & directed by Architect / Consultant &

and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

Seven Thousand

complete including cost of necessary, form work, compacting with

Five Hundred

vibrator curing centering & shuttering in true line and level etc, but

18 Cmt. 16.70 7,583.69 Eighty Three

excluding the cost of reinforcement for RCC work in (D) For Columns for

Rupees Sixty Nine

any type of cross sectional area for G.F. Lvl. etc., for any type of cross

section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

Seven Thousand

complete including cost of necessary, form work, compacting with

Six Hundred

vibrator curing centering & shuttering in true line and level etc, but

19 Cmt. 15.90 7,623.88 Twenty Three

excluding the cost of reinforcement for RCC work in (D) For Columns for

Rupees Eighty

any type of cross sectional area Work at First floor etc., for any type of

Eight Paise

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Seven Thousand

vibrator curing centering & shuttering in true line and level etc, but Six Hundred Sixty

excluding the cost of reinforcement for RCC work in (D) For Columns for Four Rupees

any type of cross sectional area Work at Second floor etc., for any type Eighteen Paise

of cross section area complete as directed by E. I. C.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand

vibrator curing centering & shuttering in true line and level etc, but Seven Hundred

excluding the cost of reinforcement for RCC work in LINTLE-BEAM, Thirty Five Rupees

LINTEL & SILL & COPING for all cross sectional area at G.F. Lvl. etc., Twenty Nine Paise

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

Six Thousand

complete including cost of necessary, form work, compacting with

Seven Hundred

vibrator curing centering & shuttering in true line and level etc, but

22 Cmt. 6.20 6,775.48 Seventy Five

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

Rupees Forty

LINTEL & SILL & COPING for all cross sectional area at F.F. Lvl. etc.,

Eight Paise

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

Six Thousand

complete including cost of necessary, form work, compacting with

Eight Hundred

vibrator curing centering & shuttering in true line and level etc, but

23 Cmt. 4.40 6,815.78 Fifteen Rupees

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

Seventy Eight

LINTEL & SILL & COPING for all cross sectional area at S.F. Lvl. etc.,

complete as directed by E. I. C.

Providing and laying Controlled cement concrete M:25 and Curing

Complete for reinforced concrete Chhajjas up to all floor two level Six Thousand

including finishing the exposed surfaces with cement mortar 1:3 (1- Seven Hundred

cement, 3 Fine sand) to give a smooth and even surface centering and Sixty Five Rupees

formwork and curing complete excluding cost of reinforcement. etc., Ninety Nine Paise

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand

vibrator curing centering & shuttering in true line and level etc, but Seven Hundred

excluding the cost of reinforcement for RCC work in SLAB BEAMS for Thirty Five Rupees

Ground floor & Super structure, & for any type of cross sectional area. Twenty Nine Paise

etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

Six Thousand

complete including cost of necessary, form work, compacting with

Seven Hundred

vibrator curing centering & shuttering in true line and level etc, but

26 Cmt 19.80 6,775.48 Seventy Five

excluding the cost of reinforcement for RCC work in SLAB BEAMS at First

Rupees Forty

Floor & for any type of cross sectional area. etc., complete as directed by

Eight Paise

Providing and laying controlled cement concrete M:25 and curing

Six Thousand

complete including cost of necessary, form work, compacting with

Eight Hundred

vibrator curing centering & shuttering in true line and level etc, but

27 Cmt 5.20 6,815.78 Fifteen Rupees

excluding the cost of reinforcement for RCC work in SLAB BEAMS at

Seventy Eight

Second Floor to Terrace Floor & for any type of cross sectional area. etc.,

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand Four

vibrator curing centering & shuttering in true line and level etc, but Hundred Fifty One

excluding the cost of reinforcement for RCC work in Staircase with steps Rupees Fifty Eight

/ Kadi Tappa, waist slab and landing at any height and level as directed Paise

etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Six Thousand Five

vibrator curing centering & shuttering in true line and level etc, but Hundred Fifty Two

excluding the cost of reinforcement for RCC work at Plinth to Ground Rupees Seventeen

FLOOR SLAB for all thickness/cross section etc. complete as directed by Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and laying controlled cement concrete M:25 and curing

Six Thousand Five

complete including cost of necessary, form work, compacting with

Hundred Ninety

30 vibrator curing centering & shuttering in true line and level etc, but Cmt 33.40 6,592.47

Two Rupees Forty

excluding the cost of reinforcement for RCC work at FIRST FLOOR SLAB

Seven Paise

for all thickness/cross section etc. as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

Six Thousand Six

complete including cost of necessary, form work, compacting with

Hundred Thirty

31 vibrator curing centering & shuttering in true line and level etc, but Cmt 9.90 6,632.67

Two Rupees Sixty

excluding the cost of reinforcement for RCC work in SECOND FLOOR

Seven Paise

SLAB for all thickness/cross section etc. complete as directed by E. I. C.

Providing CRS TMT Bar FE 500D reinforcement for R.C.C. work including Eighty One

32 bending, binding and placing in position complete upto ground floor Kg 34129.00 81.33 Rupees Thirty

level Three Paise

Eighty Two

Providing CRS TMT Bar FE 500D reinforcement for R.C.C. work including

33 Kg 11086.00 82.35 Rupees Thirty Five

bending, binding and placing in position complete upto First floor level

Providing CRS TMT Bar FE 500D reinforcement for R.C.C. work including Eighty Three

34 bending, binding and placing in position complete for Second floor to Kg 3813.00 83.37 Rupees Thirty

terrace floor Lvl. Seven Paise

Brick work using common burnt clay building bricks having crushing Four Thousand

35 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Cmt 38.20 4,021.02 Twenty One

Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional Rupees Two Paise

Four Thousand

Brick work using common burnt clay building bricks having crushing

Two Hundred

strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement

36 Cmt 44.60 4,289.33 Eighty Nine

Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Ground Floor

Rupees Thirty

etc. Complete.

Three Paise

Four Thousand

Brick work using common burnt clay building bricks having crushing

Three Hundred

strength not less than 35 kg./Sq.Cm. at First floor Lvl. in cement Mortar

37 Cmt 45.30 4,329.82 Twenty Nine

1:6 (1-Cement :6-finesand) (B) Conventional For First Floor etc.

Rupees Eighty

Brick work using common burnt clay building bricks having crushing

Four Thousand

strength not less than 35 kg./Sq.Cm. at Second floor to terrace floor Lvl.

Three Hundred

38 in cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For above Cmt 26.40 4,370.31

Seventy Rupees

First Floor to Terrace Floor etc. Complete, as per detailed & directed by

Thirty One Paise

Half brick masonry in common brunt clay building bricks having

Six Hundred Fifty

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

39 Smt 84.40 651.67 One Rupees Sixty

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Ground

Seven Paise

Floor level.(B) Conventional

Half brick masonry in common brunt clay building bricks having

Six Hundred Fifty

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

40 Smt 98.00 657.67 Seven Rupees

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at First to

Sixty Seven Paise

Terrace Floor Lvl.(B) Conventional

Half brick masonry in common brunt clay building bricks having

Six Hundred Sixty

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

41 Smt 20.50 663.67 Three Rupees

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Terrace

Sixty Seven Paise

Floor Lvl.(B) Conventional

Three Hundred

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any

Twenty Six

42 height with all labour & material, etc. Complete, as per detailed & Smt 223.30 326.13

Rupees Thirteen

directed by EIC.

Providing 15mm thick cement plaster in single coat on Rough One Hundred

(Similar)side of single or half brick walls for interior plastering for Sixty Three

Ground floor level and finished even and smooth in (ii) Cement mortar Rupees Eighty

1:4 (1-cement :4-sand) Five Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing 15mm thick cement plaster in single coat on Rough

One Hundred

(Similar)side of single or half brick walls for interior plastering for First

44 Smt 394.60 186.61 Eighty Six Rupees

floor level and finished even and smooth in (ii) Cement mortar 1:4 (1-

Sixty One Paise

cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough

Two Hundred

(Similar)side of single or half brick walls for interior plastering at Second

45 Smt 130.10 209.36 Nine Rupees

Floor to Terrace floor level and finished even and smooth in (ii) Cement

Thirty Six Paise

mortar 1:4 (1-cement :4-sand)

One Hundred

Providing 10mm thick cement plaster in single coat on brick/concrete

Forty Seven

46 Ceiling for interior plastering for Ground Floor level and finished even Smt 282.90 147.94

Rupees Ninety

and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Four Paise

Providing 10mm thick cement plaster in single coat on brick/concrete One Hundred

47 Ceiling for interior plastering for First Floor level and finished even and Smt 266.60 170.70 Seventy Rupees

smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) Seventy Paise

One Hundred

Providing 10mm thick cement plaster in single coat on brick/concrete

Ninety Three

48 Ceiling for interior plastering at Second Floor to terrace floor Lvl. and Smt 51.20 193.46

Rupees Forty Six

finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Providing and applying Texturer finish on RCC elements to give expose

One Thousand

finish of approved shade and brand. Job includes proper griding of RCC

49 Smt 427.10 1,016.12 Sixteen Rupees

joints before applying texture, complete with scafolding directed as per

Twelve Paise

Architect and EIC

Providing 20mm thick double coat external cement plaster on brick/

concrete work for plastering comprising of base coat of 12mm thick

Two Hundred

cement plaster in cement mortar (1 Cement:4 coarse sand) in rough

50 Smt 427.10 270.43 Seventy Rupees

finishing and 8mm thick top coat of cement mortar 1:2 (1 Cement:

Forty Three Paise

Coarse sand) finished rough / with Trovel including scaffolding curing

etc. complete.

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1

cement : 4 coarse sand ), furrowing the under layer with scratching tool,

Nine Hundred

applying cement slurry on the under layer @ 2 Kg of cement per square

Ninety Five

51 metre, top layer 15 mm cement plaster 1:1/ 2:2(1 cement: 1/2 coarse Smt 473.00 995.30

Rupees Thirty

sand : 2 stone chipping 10 mm nominal size), in panels with groove all

around as per approved pattern, including scrubbing and washing the

top layer with brushes and water to expose the stone chippings

,complete as per specification and direction of Engineer-in-charge

Add for plaster groove in plastered surface or moulding to R.C.C.

52 Rmt 551.90 41.00 Forty One Rupees

projections.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or Nine Hundred

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with Seventy One

grey cement slurry mixed with pigment to match the shade of slab Rupees Ninety

including rubbing and polishing etc. complete. (A) Five Paise

25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1- One Thousand

54 Cement : 3 coarse sand) and jointed with gray cement slury mixed with Smt 40.90 1,056.26 Fifty Six Rupees

pigment to match the shade of slab including rubbing Twenty Six Paise

and polishing etc. complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) One Thousand

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or Three Hundred

55 fixing on existing flooring by adhesive material including dismentaling of Smt 33.50 1,397.83 Ninety Seven

existing flooring and jointed with color cement slurry including finised Rupees Eighty

with flush pointing & cleaning the surface etc. complete for antiskit. Three Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" or One Thousand

as specified in skirting risers of steps and dedo on 10mm thick. cement One Hundred

plaster 1:3 (1-cement: 3-coarse sand) and jointed with white cement Forty One Rupees

slurry as per the detailed by Architect & direction of Engineer-in- Charge. Forty Five Paise

Providing and laying Ceramic tiles 6mm thick in flooring, treads of steps

and landing laid on a bed of 12mm thick Water proof cement plaster

One Thousand

with mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing Chemical

One Hundred Fifty

57 Agent and cement vata (10cm. x 10 cm. size) quarter round in cement Smt 34.00 1,156.60

Six Rupees Sixty

mortar 1:1 including neat cement finishing, watering etc. complete

finishing with flush pointing in white cement. (For UG tank flooring)

Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps

One Thousand

and dedo on 10mm thick Water proof cement plaster with mortar 1:3 (1-

One Hundred Fifty

58 cement : 3- coarse sand ) & Water Proofing Chemical Agent and finishing Smt 99.00 1,153.67

Three Rupees

with flush pointing in white cement. (For UG Tank walls)

Sixty Seven Paise

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished

at all exposed Surface, Pre-moulded and pre-polished, machine cut

Granite of any colour and shade, & finish, as per detailed by architect /

Consultantfor flooring, dado skirting, cladding, steps and risers, kitchen

platforms, vanity counters, window sills , fascias and similar locations of Three Thousand

required size, approved shade, colour and texture laid over 20 mm thick Three Hundred

mortar 1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting Ninety Six Rupees

on In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 Sixty Three Paise

coarse sand), joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including Spacer tape 6.4 mm thick x 4 TO

mm as per detailed groove, rubbing, curing, moulding and polishing to

edges to give high gloss finish as per concept etc. complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm One Thousand

(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse sand) or Thirty Eight

L.M. 1.1.5 laid over and jointed with grey cement slurry including Rupees Seventy

rubbing and polishing etc. complete. (B) 30mm thick. Six Paise

Providing and fixing sandwich type platform including supplying and

fixing granite stone 18 mm thick mirror polished stones in top and side

Seven Thousand

position and vertical strip at front over 25 mm thick polished kota stone

Three Hundred

61 platform fixing in top and sides and intermediates supports fixing with Smt 3.00 7,335.13

Thirty Five Rupees

cement mortar and adhesive and finishing including making recess for

Thirteen Paise

Kitchen/ Laboratory sink etc. complete as approved and directed by

Consultant / EIC.

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement

Seven Hundred

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

Forty Seven

62 out upto surface using white cement including rounding off junctions Smt 275.30 747.29

Rupees Twenty

and extending them upto 15 cm along the wall,clearing with water and

Nine Paise

oxalic acid etc. as directed. (The Product performance shall carry

Guarantee for 10 years)

Three Hundred

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-

Twenty Two

63 coarsesand: 4-graded stone aggregate 20mm nominal size) laid in one Smt 29.30 322.93

Rupees Ninety

layer and finished with a floating coat of neat cement. (B) 50mm thick.

Three Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows,

clerestory windows and other frames, wrought framed and fixed in

position with hold fast lugs or with dash fasteners of required dia &

length Incl. Providing and fixing 35 mm thick (or as specified) ISI marked

flush door shutters conforming to IS : 2202 (Part I) decorative type, core

of block board construction with frame of 1st class hard wood, with Six Thousand

1mm. thk, ISI marked designed laminate in any finish on both faces of Seven Hundred

shutters., slit openings with bidding Patti & 6mm thk designed acid wash Thirty Two Rupees

glass,. Stainless Steel butt hinges [125x65x2.5mm. IS1281712] with Ten Paise

necessary screws, using branded S.S. matt /glossy / platinum finished

accessories, Colour / polishing all bidding parts, and also incl. with all

Material, labour, tools, tolerance, scaffolding etc. complete as per

concept /direction and approved by Architect, and directed by Engineer-

In-Charge.

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections

(JINDAL-DOMAL Series OR Equivalent), hI-perfomance Sliding/ Openable

window/door with Required thick toughened designer glass of Saint

Gobain or equielent, is used for Aluminum Hi-Profile Section with

necessary accessories and with additional shutter with Stainless Steel

Mosquito net. [In Opening Position always one of Mosquito net shouter

should be in Close Position], captive bead, extremely difficult to remove

once glazed, high performance weather stripping, internal wedge gasket, Seven Thousand

Bottom, side and top section including necessary filling up the gaps at Seven Hundred

junctions, with required EPDM rubber/ etc. and ISI ebco make,"Lx. Forty Two Rupees

Premium" Required Finish door fixture Accessories As per Architect Sixty One Paise

Concept, High security interlocking bead, Sheet membrane flashing , 2"

over jamb flashing, New Blocking with new backer rod and sealant,

channel glide with runner, slide fold hinge when ever need of sufficient

capacity, with warranty, all types of material, labour, transportation,

tools tolerance and matching required level with Flooring etc. complete

as per Architect concept and as per detailed by Architect / consultant &

Directed by EIC.

One Thousand

Providing and fixing standared extruded of alluminium section of size

One Hundred

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

66 Smt 4.50 1,175.56 Seventy Five

alluminium frame for ventilation with 5 mm thick frosted glass as details

Rupees Fifty Six

etc complete for Ventilation

Six Hundred Thirty

Providing and fixing hydraulic door closer of approved size and make as

67 Each 10.00 639.11 Nine Rupees

directed engineer in charge. all lift, level and leads.

Eleven Paise

Providing & Fixing M.S. grills of required pattern to wooden frames of

One Hundred One

windows, RCC or as specified in drawings etc. with M.S. flats at required

68 Kg 4930.00 101.17 Rupees Seventeen

spacing & frame around, square or round bars with round headed bolts

& nuts or by screws (A) Plain Grill, as per detailed & directed by EIC.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing, supplying, fixing, fabricating, erecting, aligning the structural

steel like pivot ,tubular 'T', 'I" section, angle, plate, beam, channel

section, Bar , hollow box or Z purloins, Round or Square Pipes, of

approved make, for built up purloins, roof trusses, columns, side

runners, tie beams, sag rods, base plates gusset plates, cap plates,

bearing bracing, gantry girders, rails, require support, pipes, including all

welded or bolted steel structures of various types with approved I.S.I.

mark electrodes, bolts, anchor bolts including cost of thread, Anchor One Hundred

plate cleats etc. in RCC or masonry work, including cutting, bending, Twenty Seven

welding ,fixing, supplying , Fabricating Decorative fevisted section or any Rupees Ninety

structured member required to complete the job for Bridge, Trusses, Five Paise

Canopy, doors, Frame, Railing, Entrance gate, pergola, Decorative

hanging light , New window, parking shed or space frame or any other

required specified area as shown on drawing and detailed specification

or as per design incl. three coats of approved brand primer and two

coats of paints, necessary scaffolding, tools tolerance etc. complete as

directed by Engineer In Charge. (payment will be made for weight of

metal used in the work)

Finishing wall with Weather proof exterior emulsion paint on wall

One Hundred

surface (two coats) to give an required shape even shade after

70 Smt 475.30 114.53 Fourteen Rupees

thoroughly brushing the surface to remove all dirt, and remains of loose

Fifty Three Paise

powdered materials.etc complete.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Wall painting (two coats) with plastic emulsion paint of

One Hundred

approved brand & manufacture on undecorated wall surfaces to give an

71 Smt 1047.50 119.49 Nineteen Rupees

even shade including thoroughly brushing the surface free from mortar

Forty Nine Paise

droppings & other foreign matter & sand papered smooth, as per

detailed & directed by EIC.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Ceiling painting (Two coats) with plastic emulsion paint of One Hundred

approved brand and manufacture on undecorated Ceiling surface to give Twenty Four

an even shade including thoroughly brushing the surface free from Rupees Seventy

mortar droppings and other foreign matter and sand papered smooth, Six Paise

as per detailed & directed by EIC.

Painting two coats (including priming coat) on new steel and other metal One Hundred

surface with enamel paint, brushing, interior to give an even shade Twenty Two

including cleaning the surface an even shade including cleanicn the Rupees Eighty

surface of all dirt, dust and other foreign matter. One Paise

Providing and fixing roof panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on Eight Hundred

74 both side of the sheet and polyester top coat 15-18 micron. The PPGI Smt 10.00 858.67 Fifty Eight Rupees

Sheet shall have plastic protective guard film of minimum 25 microns to Sixty Seven Paise

avoid scratches during transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc complete .

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia

SS pipe of 16 gauge, round balustrade of 32mm [50mm 16G Grade

with glossy finish consisting of 32 NB or nearest size vertical posts

Height at maximum spacing 900c/c with suitable cups at bottom and top

rail of 50 NB or nearest size & intermediate rails of 16 NB or nearest size

Three Thousand

etc complete] with complete assembly of SS studs to house the

Six Hundred Forty

75 horizontal 16mm pipes and top handrail, bend and coupler to be used as Rmt 51.80 3,646.91

Six Rupees Ninety

per architectural detail drawings for the railing in parapet, stair etc.

including fabricating, hoisting, fixing in position with angle cleats,

holdfast etc. in RCC or masonry in true line level and plumb, including

complete assembly, including matt polishing and buffing complete,

including scaffolding etc. complete as directed by EIC.(Actual length of

stair railing shall be measured at site & same shall be paid. No wastage

should be measured or paid.)

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, [top rail of 50 NB

or nearest size complete] with complete assembly, bend and coupler to

be used as per architectural detail drawings for the railing in parapet, One Thousand

stair etc. including fabricating, hoisting, fixing in position with angle Three Hundred

cleats, holdfast etc. in RCC or masonry in true line level and plumb, Fifty Six Rupees

including complete assembly, including matt polishing and buffing Eighteen Paise

complete, including scaffolding etc. complete as directed by EIC.(Actual

length of stair railing shall be measured at site & same shall be paid. No

wastage should be measured or paid.)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic Grade

Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm.

Descaling and degreasing the board as per requirement using epoxy

reflactive process by screen painting as directed etc. complete including Seven Thousand

transporting and fixing in C.C. 1:2:4 with necessary excavation curing etc. Six Hundred Ten

complete as per I.R.C. 67-2012 design. A warranty for 7 years for the Rupees Sixty Six

Retro reflective sheeting from original manufacturer & a certified copy Paise

of 3 year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane over uniform surface of slab. Apply 2 coats at

dosage of 1.5 kgs per sq.m to achieve the required minimum DFT of

1.5mm. It should have following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ± 0.1 Nine Hundred

3. Elongation % ≥ 700% Seventy Nine

4. Dosage 1.2 - 1.5 kg/m2 in two coats Rupees Fourteen

5. Tack Free Time 24 - 48 hrs Paise

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

(The Product performance shall carry Guarantee for 10 years)

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic Six Hundred

compressed / vibrated mechanically and as per approved design Eighty Three

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling Rupees Eighty

and filling the joint with sand in proper line and level as per guidlines of Eight Paise

IRC SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement based

Three Hundred

concrete block 30cm length, 30cm height and 15cm thick of M200 grade

Eighty Three

80 concret as per approved design and including excavation for fixing in Rmt 130.00 383.38

Rupees Thirty

proper line and level, filling the joint with C:M 1:3 (1 cement:3 fine sand)

Eight Paise

etc complete.

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: 1:2:4 Cement

Concrete laid in required slope at concrete floor as directed and

specified using necessary steel form work with M.S. Channels including

forming construction & contraction joints 4 mm to 6mm wide by cutting

the floor up to ¼ th depth of thickness of the concrete depth using

mechanical saw and sealing the joint with poly sulphide sealant up to full Seven Thousand

depth of cutting including providing & fixing M.S. dowels bars with One Hundred

bitumen painted of full length as shown in drawing as to form the bays Seventeen Rupees

not exceeding 6.0 m X 4.5 m etc. complete as per directed by Architect Seventeen Paise

or Engineer-In-Charge. For all level and leads.(a) For RCC Road Note:

Rates are Incl. cost of Cement Concrete Pavement shall be 150mm. Thk.

or as detailed and rolling 2 times as per mentioned above and also all

tools tolerance, shuttering, channel, etc. complete as per detailed &

Directed by Architect & EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR

type B pipe confirming to IS 13592-1992 with one end plain & other end

socket with rubbering & Fixing conforming to ISI 14735-1999 of

approved make for drain system pipe line, pipe shall be jointed with

Eight Hundred

each other with rubber lubricant, pipe shall be fixed on wall using PVC

82 Rmt. 57.50 835.15 Thirty Five Rupees

clamps of the size 160mm dia x 210mm length x 196mm high at every

Fifteen Paise

2000mm centre to centre or shall be concealed in wall as directed

necessary fittings such as bends, shoes, etc. incl. testing of pipe & joint &

jointed with adhesive solvent, cement incl. cost of all material etc.

complete as per detailed, directed & approved by the consultant / EIC.

Twenty Four

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM as

Thousand Two

83 per IS 9079 at departmental stores with following MOC: Casing: CI- Nos 1.00 24,240.00

Hundred Forty

FG260, Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m head

Control panel- DOL / Star Delta starter suitable for local & remote pump

Six Thousand Nine

control application consisting of MPCB, overload relay and contactors as

Hundred Ninety

84 per Type II coordination including digital voltmeter, analogue ammeter Nos 1.00 6,993.24

Three Rupees

Twenty Four Paise

control accessories.

Providing laying and jointing in true line and level 75mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer Two Hundred

In Charge. Pipe shall be fixed on the wall with the help of clamp at every Seventy Seven

two metre C/C or shall be concealed as directed including necessary Rupees Forty

fittings etc. including testing of pipe and joints and fixing the same with Three Paise

adhesive solvent, including cost of all materials.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

Seventy Two

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

86 Rmt. 37.50 72.65 Rupees Sixty Five

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

Ninety One

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

87 Rmt. 41.00 91.84 Rupees Eighty

two metre C/C or shall be concealed as directed including necessary

Four Paise

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer One Hundred

In Charge. Pipe shall be fixed on the wall with the help of clamp at every Forty Eight

two metre C/C or shall be concealed as directed including necessary Rupees Twelve

fittings etc. including testing of pipe and joints and fixing the same with Paise

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer One Hundred

In Charge. Pipe shall be fixed on the wall with the help of clamp at every Ninety Five

two metre C/C or shall be concealed as directed including necessary Rupees Sixty

fittings etc. including testing of pipe and joints and fixing the same with Seven Paise

adhesive solvent, including cost of all materials.

Four Hundred

Providing & Fixing gun metal check or no return full way wheel valve etc.

90 Each 10.00 420.63 Twenty Rupees

complete as per the instruction of EIC. (C) 25 mm. Dia

Sixty Three Paise

Six Hundred Sixty

Providing & Fixing gun metal check or no return full way wheel valve etc.

91 Each 10.00 663.43 Three Rupees

complete as per the instruction of EIC. (E) 40 mm. Dia

Forty Three Paise

Two Hundred

Providing and fixing screw down bib taps of following size.(A) Brass

92 Each 8.00 214.81 Fourteen Rupees

screw down bib tap polished bright. (i) 15mm dia.

Eighty One Paise

Two Hundred

Twenty Three

93 Providing and fixing brass screw down stop tap.(B) 20mm dia. Each 7.00 223.81

Rupees Eighty

Providing erecting and fixing double coated ISI water tank of required

Three Rupees

94 capacity each with all necessary fittings and connection etc. complete on Liter 8000.00 3.95

Ninety Five Paise

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm

Seven Hundred

diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of the

Thirty Three

95 following nominal diameter of self cleansing design with C.I screed down Each 14.00 733.26

Rupees Twenty

or hinged grating including the cost of cutting & making good the walls,

as per detailed, directed & approved by the EIC.

One Thousand

Providing and fixing S.W. gully trap with C.I. grating brick masonry

Two Hundred

chamber and water tight C.I. cover with frame of 300mm x 300mm size

96 Each 8.00 1,292.19 Ninety Two

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

Rupees Nineteen

100mm size P type.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm internal dimensions, total weight of cover with frame to be not Two Thousand

less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top Nine Hundred

97 slab with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate Each 6.00 2,932.93 Thirty Two Rupees

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with Ninety Three

cement mortar 1:3 finished smooth with a floating coat of neat cement Paise

on walls & bed concrete for (i) Inside dimensions 455mmx 610mm &

450mm deep for single pipe line. etc. complete as per detailed, directed

& approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand )

finished with a floating coat of neat cement & making channels in Nineteen

cement 1:2:4 mix ( 1 cement : 2 coarse sand :4 stone aggregate 20mm Thousand Three

98 nominal size ) finished smooth complete including curing & testing… ( I ) Each 6.00 19,349.63 Hundred Forty

inside 900mm x 1200 mm & 1.5 m deep including R.c.c. cover with frame Nine Rupees Sixty

size 560 mm diameter ( A ) with 230mm thick walls of brick masonry Three Paise

using brick having crushing strength not less then 35 kg/sqcm in CM 1 :

( 1 cement : 5 coarse sand ), (2) B type depth 1.50 Meter for 150mm

diameter sewer.. etc. complete as per detailed, directed & approved by

the consultant / EIC.

Providing Septic Tank of 10.00 mt x 4.00 mt x2.00 mt size for Sewerage Two Hundred

including excavation with any strata up to four meter depth,PCC in Sixty Four

Bottom Slab 1:3:6,Brick Work in cement mortar 1:5, RCC M200 Slab on Thousand Three

Top And bottom, required filling for Tank including making Required line Hundred Five

for water inlet, precast RCC M.200 Frame & cover etc.as directed by Rupees Eighty

engineer in charge. etc complete, septic tank as per detailed drawing. Nine Paise

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

Eight Hundred

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

Thirty Four

100 dia x 210mm length x 196mm high at every 2000mm centre to centre or Rmt. 126.00 834.38

Rupees Thirty

shall be concealed in wall as directed necessary fittings such as bends,

Eight Paise

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete Light Six Hundred

duty non-pressure pipes I.S. class NP2 of the following internal diameter Seventy Seven

with collars and butt ends prepared for collar joints including testing of Rupees Ninety

joints complete.(D) 300mm Seven Paise

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear

dimention including the cost of excavation, P.C.C. 1:4:8 and filling Thirty Three

brickbats with dry masonry work, Honeycomb masonary work, M:20 Thousand Eight

102 RCC. SLab incl. form work including FE-500 Reinforcemnt, M.S.cover, C.I. Each 1.00 33,868.33 Hundred Sixty

Pipe & cowl vent, vatas in C.M. 1:3 with finishing curing etc. complete as Eight Rupees

directed.. etc. complete as per detailed, directed & approved by the Thirty Three Paise

consultant / EIC.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing & Fixing white colour, Vitreous china, under / Over Counter

wash basin with single hole for pillar type with Cl or MS brackets painted

white including cutting holes, ranking bolts for Fixing & marking good the

same, including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap

Two Thousand Six

& 15mm dia pillar tap, Bottle Trap, as approved, capstan head C.P.

Hundred Seventy

103 screwed down high pressure with screw shank & back nuts & rubber Each 5.00 2,672.16

Two Rupees

plugs, 15mm dia brass stop cock (50/75mm p.v.c. Drain connection pipe,

Sixteen Paise

Water Connection Pipe of required Size, & testing the same for leak

proof, etc. with all material & labours to complete this job in all

respected manners, etc. complete as per detailed & approved by the

consultant & directed by EIC.

Providing and fixing wash down water closet (European type,Wall hung

W.C. Pan) with integral P or S trap including jointing the trap with soil

pipe in Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat Seven Thousand

104 and cover for wash down water closer with C.P. brass hinges, C.P. brass Each 4.00 7,001.62 One Rupees Sixty

toilet paper holder, Jet Spray, Metropole flush valve Incl. Connection and Two Paise

rubber buffers. (A) Vitreous China., etc. complete as per detailed &

approved by the consultant & directed by EIC.

Providing and fixing water closet squatting Pan including trap and foot One Thousand

rest (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete to be Four Hundred

measured and paid for separately) (A) Vitreous China.(I) Long pattern = Rupees Sixteen

White colour Paise

One Thousand

Providing and fixing Urinal or approved quality including conecting the

Seventy Four

106 Urinal with waste pipe , tap etc. complete.(A) White earthenware flat Each 3.00 1,074.86

Rupees Eighty Six

back or corner type size 430mm x 260mm x 350mm.

Providing & Fixing C.P. brass towel rail Approved Make complete with

C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws,, etc.

Six Hundred

complete as per detailed, directed & approved by the consultant / EIC.

107 Each 5.00 616.42 Sixteen Rupees

(B) 600mm x 20 mm size, etc. with all material & labours to complete this

Forty Two Paise

job in all respected manners, etc. complete as per detailed & approved

by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to Eight Hundred

108 wooden plugs with C.P. brass screws & washers, etc. with all material & Each 5.00 859.41 Fifty Nine Rupees

labours to complete this job in all respected manners, etc. complete as Forty One Paise

per detailed & approved by the consultant & directed by EIC.

Providing & Fixing handicap toilet set with Wall-mounted European

Closet & wash basin & all handicap requirement with dual flush tank,

seat & lead (heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. /

C.I. painted brackets, Waste Coupling, 32mm size bottle trap etc. all

Forty Thousand

Internal fittings complete with grab rails, swin type grab bar etc. rubber

Four Hundred

buffers, C.P nuts, bolts etc making holes in walls & floors, & finishing for

109 Each 1.00 40,425.96 Twenty Five

ready to use. The rate includes all necessary connection charges as per

Rupees Ninety Six

product detail to the satisfaction of Architect / engr. in-charge where

required & the final handing over etc. complete as per specifications,

drawings & as directed by the Engineer-in-charge. The scope includes

Providing and fixing all the necessary fittings of approved brand and as

per directed by Architect/EIC.

Three Hundred

Providing & Fixing pillar tap, screw down high pressure with screws, Eight Rupees

shanks & back nuts. (i) 15mm dia. Seventy Three

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Two Hundred Five

111 Providing & Fixing brass screw down stop tap. (A) 15mm dia. Each 5.00 205.83 Rupees Eighty

Three Paise

Two Thousand

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets, Three Hundred

112 painted white including cutting holes in walls and making good the same Each 0.00 2,326.66 Twenty Six -

but excluding fittings. Rupees Sixty Six

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling Piping Seven Hundred

Work as Per Directed By Engineer In Charge Seven Rupees

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

One Thousand

drain pipe etc. and repairing the hole after insertion of drain pipe etc.

One Hundred

114 with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone Each 20.00 1,161.50

Sixty One Rupees

aggregate 20 mm nominal size), including finishing complete so as to

Fifty Paise

make it leak proof.

Point wiring in Copper (Modular) Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling complete

Four Hundred

with 6A Modular type switch / bell push & accessories and earth

Eighty Five

115 continuity of following type, erected on PVC / Metallic box, single Pt. 53.00 485.81

Rupees Eighty

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling, complete with earth

One Hundred

continuity and necessary connection with primary light with accessories

Sixty Seven

116 erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) Pt. 78.00 167.66

Rupees Sixty Six

/ Acrylic sheet for open / concealed wiring. with necessary Lamp holder

/ ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains

for Secondary Point. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan regulator Six Hundred

with separately mounted and accessories with earth continuity of Seventy Four

following type erected on PVC / Metallic box, single mounting base Rupees Sixty Eight

frame covered with textured/metallic front plate modules erected on / Paise

in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat-III

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic box covered with appropriate front plate modules Five Hundred Ten

erected on / in wall / ceiling as per pipe erected with following type of Rupees Five Paise

accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

Seven Hundred

on PVC / Metallic box covered with appropriate front plate modules

119 Pt. 4.00 745.38 Forty Five Rupees

erected on / in wall / ceiling as per pipe erected with following type of

Thirty Eight Paise

accessories.

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete (FRLS) CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

Nine Hundred

on PVC / Metallic box covered with appropriate front plate modules

120 Pt. 6.00 915.06 Fifteen Rupees Six

erected on / in wall / ceiling as per pipe erected with following type of

accessories.

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete (FRLS) CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

Two Hundred Fifty

textured / metallic front plate modules erected on / in wall / ceiling

121 Pt. 80.00 257.55 Seven Rupees

with following type accessories.

Fifty Five Paise

Single mounting base-frame & Textured / Metallic front plates. Cat-

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of pipe to

be erected concealed in / flushed on wall/ceiling ,complete with 6A

Modular type switches and following type of accessories erected on PVC Six Hundred Three

122 / Metallic box, single mounting base frame covered with textured / Pt. 6.00 603.98 Rupees Ninety

metallic front plate modules erected on / in wall / ceiling as per pipe Eight Paise

erected. with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with pvc

/ metallic box, single mounting base frame covered with textured / Twenty Five

123 metallic front plate , modules erected with necessary connection. As Ea. 20.00 25.25 Rupees Twenty

desired by Engineer In charge Five Paise

(7) Blank Plate Single Cat-III

Seventy One

124 Decorative call bell Ting-tong box type 250 volts complete erected Ea. 1.00 71.71 Rupees Seventy

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing following type of Modular Type Accessories mounted with PVC

/ metallic/Wooden box, single mounting base frame covered with One Hundred

125 textured / metallic/white front plate , modules erected with necessary Ea. 11.00 160.59 Sixty Rupees Fifty

connections as per site situation directed by Engineer In charge. Nine Paise

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with Thirty Three

126 necessary PVC fittings & Junction boxes fixed with adhesive solution & Mtr. 500.00 33.33 Rupees Thirty

Clamps with following dia of pipes, in approved manner as directed b) Three Paise

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with Sixty Seven

127 necessary PVC fittings & Junction boxes fixed with adhesive solution & Mtr. 40.00 67.67 Rupees Sixty

Clamps with following dia of pipes, in approved manner as directed d) Seven Paise

Providing & erecting PVC Corrugated Flexible Conduit with required nos. Twenty One

128 of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) Mtr. 200.00 21.21 Rupees Twenty

25 mm One Paise

(A) Supplying and laying UPVC cable trunking system comprising Two Hundred

unplasticised polyvinyl, chloride rigid material with ignition free & flame Seventy Seven

proof confirming BS .All necessary accessories and measuring of Rupees Seventy

following sizes. (1) 75 mm x 50 mm trunking Five Paise

(A) Supplying and laying UPVC cable trunking system comprising One Hundred

unplasticised polyvinyl, chloride rigid material with ignition free & flame Eighty Eight

proof confirming BS .All necessary accessories and measuring of Rupees Eighty

following sizes. (3) 50 mm x 50 mm trunking Seven Paise

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Sixty Two Rupees

insulated stranded wire of green colour for earth continuity of following Sixty Two Paise

size (general wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Eighty Two

132 insulated stranded wire of green colour for earth continuity of following Mtr. 1200.00 82.82 Rupees Eighty

size (general wiring + in street light) Two Paise

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / One Hundred

133 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded Mtr. 250.00 112.11 Twelve Rupees

wire of green colour for earth continuity of following size (FRLS) (a) with Eleven Paise

medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Two Hundred

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Eighty Four

necessary clamps or in existing trench / pipe of following size of cables Rupees Eighty

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Two Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Two Hundred

multistrand Copper conductor for 1.1 KV. to be laid on wall with Eighty Seven

necessary clamps or in existing trench / pipe at road crossing or floor of Rupees Eighty

following size of cable. (B) 3 core 4 Sq. mm Five Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

Three Hundred

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with

136 Mtr. 40.00 364.61 Sixty Four Rupees

necessary clamps or in existing trench / pipe at road crossing or floor of

Sixty One Paise

following size of cables. (B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with Five Hundred Ten

necessary clamps or in existing trench / pipe at road crossing or floor of Rupees Five Paise

following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Six Hundred

multistrand Copper conductor for 1.1 KV. to be laid on wall with Seventy Six

necessary clamps or in existing trench / pipe at road crossing or floor of Rupees Seventy

following size of cables. (A) 4 core 10 Sq. mm Paise

Supplying and erecting Flexible PVC insulated multi strand multi core

Forty Six Rupees

139 kv grade ISI marked copper wires of following size to be erected as Mtr. 250.00 46.46

Forty Six Paise

directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and, fixing heavy duty flange type brass cable gland with

Thirty Three

rubber ring for PVC insulated armoured cable complete with out going

140 Ea. 8.00 33.33 Rupees Thirty

tails, insulating tape etc for following size of cables.

Three Paise

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

Thirty Eight

rubber ring for PVC insulated armoured cable complete with out going

141 Ea. 6.00 38.38 Rupees Thirty

tails, insulating tape etc for following size of cables.

Eight Paise

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

Thirty Eight

rubber ring for PVC insulated armoured cable complete with out going

142 Ea. 4.00 38.38 Rupees Thirty

tails, insulating tape etc for following size of cables.

Eight Paise

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass double compression

Seventy Five

type cable gland with rubber ring for PVC insulated armoured cable

143 Ea. 2.00 75.75 Rupees Seventy

complete with out going tails, insulating tape etc for following size of

Five Paise

cables. (B) 3 & 1/2 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & Fifteen Rupees

connected to switchgear terminals with brass/cadmium plated nut bolts Fifteen Paise

in an approved manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & Twenty Rupees

connected to switchgear terminals with brass/cadmium plated nut bolts Twenty Paise

in an approved manner. (D) 35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to Eight Rupees Eight

switchgear terminals with brass/cadmium plated nut bolts in an Paise

approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to Ten Rupees Ten

switchgear terminals with brass/cadmium plated nut bolts in an Paise

approved manner. (B) 10 Sq.mm

Making trench in soft soil of suitable width of 90 cms deep for laying

Fifty Five Rupees

148 cable or locating the fault all over the run and backfilling the same and Mtr. 200.00 55.55

Fifty Five Paise

making the surface as normal ground.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying of Sixty Two Rupees

cable. below ground / road surface for enclosing cable and back filling Sixty Two Paise

the same to make ground as per original. (A)50 mm dia

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

Ninety Five

connecting accessories of same material at required depth for laying of

150 Mtr. 180.00 95.95 Rupees Ninety

cable. below ground / road surface for enclosing cable and back filling

Five Paise

the same to make ground as per original. (C)90 mm dia

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal Six Thousand One

current rating up to 25 A to 100A. with Fixed thermal & magnetic release Hundred Seventy

suitable to work on A.C. supply 50 c/s. with all internal connections, Three Rupees

spreader tinned copper & complete erected in existing 16 G.M.S. Twelve Paise

housing. ICS=100% of ICU only Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A

One Hundred

suitable to operate on 240 V A.C. system and having breaking capacity

152 Ea. 93.00 112.11 Twelve Rupees

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Eleven Paise

Mark - Cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load Six Hundred Sixty

153 (C Curve) having 10KA breaking capacity & confirms to IS :8828 in Ea. 4.00 668.62 Eight Rupees Sixty

existing box having following capacity (b)40 Amp. Cat.III Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load Five Hundred

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in Eighty Seven

existing box having following capacity (a) 6 to 32 Amp. Rupees Eighty

Cat.III Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load

Six Hundred Forty

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

155 Ea. 7.00 647.41 Seven Rupees

existing box having following capacity (b)40 Amp.

Forty One Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

One Thousand

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

One Hundred Fifty

156 MCB to house appropriate nos. of MCBs.(The DBs should be used of Ea. 2.00 1,152.41

Two Rupees Forty

same company of MCB to be used) suitable for (A) single phase incoming

and horizontal single phase outgoing (b) sheet steel double door (IP-43)

(iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

Two Thousand

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

Nine Hundred

157 MCB to house appropriate nos. of MCBs.(The DBs should be used of Ea. 4.00 2,913.85

Thirteen Rupees

same company of MCB to be used) suitable for (B) three phase incoming

Eighty Five Paise

and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (ii)6 way

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door (IP54)

fitted with insulated copper busbar, isolated neutral link, earth bar and

Thousand Six

DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for

158 Ea. 1.00 18,663.60 Hundred Sixty

63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as

Three Rupees

per following .(The DBs should be used of same company of MCB to be

Sixty Paise

(D)12 way outgoing

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of One Thousand

10 KA and suitable for operation on single phase 240 V,50Hz. having Nine Hundred

characteristic of quick action & tripping with all advance feature & do Sixty Nine Rupees

not incorporate any electronic component. for following Max. rating Fifty Paise

erected as directed (i) 25 Amps.DP Cat. III

Supplying & erecting approved make IP 55 grade Company fabricated

Timer Panel of following capacity for switch On-Off street lights on time

Twelve Thousand

scheduling basis made from 16G CRCA sheet duly epoxy power painted

Three Hundred

inside and outside with hinged doors and locking arrangement consisting

160 Ea. 1.00 12,399.77 Ninety Nine

of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog

Rupees Seventy

time switch, auto manual switch of same make and suitable input and

Seven Paise

output Bakelite terminals and with door earthing approved by Engineer

in charge.(A) 32 Amp

providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of Two Thousand

10 KA and suitable for operation on single phase 240 V,50Hz. having Two Hundred

characteristic of quick action & tripping with all advance feature & do Thirty Five Rupees

not incorporate any electronic component. for following Max. rating Thirteen Paise

erected as directed (ii) 40Amps. DP Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor

Two Hundred

more than 0.95, THD < 15%,

Ninety Five

162 CCT 3000 K to 6500K, Nos. 10.00 295.93

Rupees Ninety

Luminaire efficacy> 85 lumens/watt ,LED

Three Paise

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Two Hundred

CCT 3000 K to 6500K,

163 Nos. 11.00 220.18 Twenty Rupees

Luminaire efficacy> 85 lumens/watt

Eighteen Paise

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (i) 9 watts,Surge-2 KV Cat-

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, Four Hundred

CCT 3000 K to 6500K, Twenty Seven

Luminaire efficacy> 85 lumens/watt , Rupees Twenty

LED driver efficiency > 85 % Three Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (ii) 11 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Seven Hundred

CCT 3000 K to 6500K,

165 Nos. 87.00 758.51 Fifty Eight Rupees

Luminaire efficacy> 85 lumens/watt

Fifty One Paise

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (iv) 24 watts, Surge-2 KV

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminium housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 160 to 270 V,Power Two Thousand

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity Two Hundred One

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > Rupees Eighty

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below Paise

description have shown ranges of Wattage capacity of LED fittings.The

shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (iii)

watts Cat-lll

Providing and erecting PVC body surface or pendent mounting LED Bulk

Seven Hundred

type 9 watt Lighting Fitting with electronic driver. And lumen output

Eighty Seven

167 from luminaire 720lm , input voltage range 90-300VAC , 50Hz cool Nos. 5.00 787.80

Rupees Eighty

white(3000 to 6500k), inbuilt driver, -20degC to +60degC working

temperature, AL frame with Beam Angle 120deg

Three Thousand

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D

Two Hundred

mtr. Long duly painted with two coats of aluminium paint complete with

168 Nos. 10.00 3,225.94 Twenty Five

metallic base plate of 300 mm x 300 mm x 4mm thick for using as a

Rupees Ninety

compound light pole with approx. weight 32 Kg.

Four Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the Five Hundred

169 brackets and having spread of 1 mtr. length with suitable rise as per site Nos. 10.00 561.56 Sixty One Rupees

condition & suitable welded stiffener reducer and nipple with check nut Fifty Six Paise

complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms. [A]

Single Arm bracket 1 Mtr

Providing & erecting approved make street light / wall mounting junction

box compression moulded from SMC (thermoset plastic) vertical sliding

Six Hundred

cover having locking with square head stud loop in / loop out in built

170 Nos. 10.00 616.10 Sixteen Rupees

terminal suitable for four core cable, waterproof of I.P. 54 protected

with clamp or bolt nut & earth bolt of following size. (B) 250mm x

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below Eight Hundred

171 ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high Nos. 10.00 809.01 Nine Rupees and

upper ground level with necessary curing and finishing in approved One Paise

manner. ( for 4 & 6 mtr pole)

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with

Two Thousand

canopy & 30 cm. down rod erected with earthing.(Make shall be

172 Nos. 33.00 2,056.36 Fifty Six Rupees

approved by Engineer in charge) including Supplying and erecting 19 /

Thirty Six Paise

mm. nominal bore Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation without leakage and

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded

One Hundred

to the RCC bars up to 50mm length each side and pierced through a

173 Nos. 33.00 108.07 Eight Rupees

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Seven Paise

Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Eighteen Rupees

Fan box. Eighteen Paise

One Thousand

Supplying & erecting approved make low noise decorative exhaust fan

Three Hundred

175 having square frame ABS body with inbuilt lowers & square frame. Nos. 9.00 1,366.53

Sixty Six Rupees

250mm with 1350 RPM Cat.II

Fifty Three Paise

Providing and erecting required size HOT dipped Galvanised iron strip for Seventy Seven

176 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. Kg. 100.00 77.77 Rupees Seventy

using proper clamp. Seven Paise

Seven Hundred

Providing and erecting required size Copper strip for earthing of H.T.

Ninety Four

177 OCB / ACB/ Transformer, LT panel board, Motors etc. using copper Kg. 50.00 794.87

Rupees Eighty

Seven Paise

Seventy Seven

Providing and erecting HOT deep Galvanised iron strip wire 8 to

178 Kg. 50.00 77.77 Rupees Seventy

SWG.Using for DB earthing wire 8 to 16 SWG.

Seven Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A)(approved make OEM has to submit test certificate including Seven Thousand

value of earth resistance of installation duly stamped and signed by Ninety Five

agency and officer Incharge has to ensure the value of earthing resistane Rupees Twenty

mentioned in test Certificate) & having back filling compound of (B) Five Paise

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report

must be submitted by Agency. [B] For Electrical installation up to 11 KV

located in other than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by Ten Thousand

agency and officer Incharge has to ensure the value of earthing resistane Five Hundred

180 mentioned in test Certificate) & having back filling compound of (B) Ea. 2.00 10,593.89 Ninety Three

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as Rupees Eighty

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Nine Paise

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report

must be submitted by Agency. [C] For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA)i.e.

independent Earthing located in other than normal soil i.e. Soft

Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Forty Seven

Supplying & erecting approved make LAN cable of following size in

181 RMT 1190.00 47.47 Rupees Forty

existing pipe as per direction. [C] CAT -

Seven Paise

Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base rectifier

& Inverter & sealed maintenance free SMF batteries. The charger having Eighty Two

operating capacity for input 160-270V AC & inverter having output Thousand Nine

182 230V,50 Hz Ac with 0.8 load power factor with battery, over/under Nos. 1.00 82,941.20 Hundred Forty

voltage output with over load & short circuit protection equipment. The One Rupees

system housed in CRC sheet duly powder coated paint with following Twenty Paise

power backup.with MS painted batteries stand, 10% Overload capacity

for momentary load. (C) 3 KVA with 1Hr Backup

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet Forty Nine

temp. of the water should drop by 15˚ C within a hour, The water cooler Thousand Five

183 should be comprising of hermetically sealed compressor, fan motor, Ea. 1.00 49,559.69 Hundred Fifty

condensing unit, water tank surrounded by evaporating coil, Nine Rupees Sixty

thermostats, relay etc. complete with necessary inlet & outlet Nine Paise

connection. The body of water cooler will be made from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring Twenty Nine

presediment filter GAC filter, carbon filter suitable buster DC pump Thousand One

184 capacity 80 psi, mention with 40 psi inline type post carbon filter auto Ea. 1.00 29,187.99 Hundred Eighty

low & high pressure switches with following size of storage tank & LPH Seven Rupees

capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster Ninety Nine Paise

One Hundred

Providing Water proof straight Joint in PVC insulated flat flexible copper

Eighty Nine

185 cable by using insulating material, water proofing material, & making the Ea. 10.00 189.88

Rupees Eighty

joint complete. (A) Up to 10Sq. mm

Eight Paise

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q CPPLUS

MAKE AS PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image Sensor

(0.8758 centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × Four Thousand

1440)@1-25/30 Instastream, H.265, H.264, H.264H, H.264B, MJPEG One Hundred Fifty

Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, AGC, Six Rupees Fifteen

BLC, HLC, Digital watermarking3.6mm fixed Lens Support Built-in Mic IR Paise

Range of 30 Mtr., IP67, PoE complete with rj45 connector crimping, PVC

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image

Sensor (0.9407 Centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/

(2560 × 1440)@1-25/30 Instastream, H.265, H.264, H.264H, H.264B, Eight Thousand

MJPEG Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR, Eighty Rupees

AWB, AGC, BLC, HLC, Digital watermarking3.6mm fixed Lens Support

Built-in Mic IR Range of 50 Mtr., IP67, PoE complete with rj45 connector

crimping, PVC back box

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP PLUS MAKE -

32 Ch. 4K Network Video Recorder AS PER SPECIFICATIONS : Up to

channel IP camera input Max. decoding capability: 8 × 1080p@30 fps, 2 ×

8 MP@30 fps Smart Instastream/H.265/H.264 /MJPEG Max. 160/128/60

Thousand One

188 Mbps incoming/recording/outgoing bandwidth Support 2 SATA HDDs up Nos 1.00 18,180.00

Hundred Eighty

to 20TB, 2 (1 front USB 2.0 port, 1 rear USB 2.0 port) HDMI / VGA

simultaneous video output Support Multi-brand network cameras ONVIF

Version 2.4 conformance Mobile Software: iCMOB, gCMOB CMS

Software: KVMS, KVMS Pro Lite

Thousand Three

189 Supply Installation Testing & Commissioning of 4TB Surveillance Harddisk Nos 1.00 13,352.00 Hundred Fifty Two

Rupees Twenty

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS PER

SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo gigabit SFP

PoE power budget is up to 250 W, making it ideal for small to medium

business surveillance systems. Port Priority is able to guarantee the Fifteen Thousand

190 quality of sensitive application like video monitor. PoE Auto Recovery Nos 3.00 15,150.00 One Hundred Fifty

automatically reboots your dropped or unresponsive PoE-powered Rupees

Intelligent power management protects the switch from overload. QoS

ensures smooth traffic for latency sensitive applications. IGMP Snooping

optimizes multimedia traffic delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5

Three Thousand

191 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN - Nos 2.00 3,030.00

Thirty Rupees

TP-Link Archer C50 AC1200 or equivalent

Twenty Three

Thousand Four

192 SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9 Nos 1.00 23,482.50 Hundred Eighty

Two Rupees Fifty

Nine Thousand

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets,

Five Hundred

193 mounting trays, exhaust fan complete with accessoreis - 600 X 600MM Nos 1.00 9,595.00

Ninety Five

approx. size -- Elirix make

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker input

Two Thousand

Power:8 Watt RMS Power Taps:8/4/2W on 100 V Freq.Responce:60-

Two Hundred

194 15,000Hz, SPL (1w/1m):92db,Dim./Wt: ø 227 X H77mm/0.78kg, Model Nos 20.00 2,222.00

Twenty Two

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having

following specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux., Twenty Two

frequency Response :50-1500HZ I3db, Tone, Controls :Cut & Boost type, Thousand Seven

LED Meter : 5 LED Arrays, The amplifier suitable to operate 240V A.C.& Hundred Twenty

24volt D.C. (Battery) with automatic changeover from AC to Battery Five Rupees

operation, duly protected by wrong Battery Polarity connections.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Supplying & erecting Mixing Console having channels, Audio mixer with.

Echo facility for live performance, Auditorium & stadiums, having

following features & facilities. (a)input Channels :- Each channel has

6.25mm size balanced phone jack for mike & line for balanced &

unbalanced signals (b)Individual gain control for sating optimum level for

minimum noise (c)BASS, MID & TREBLE ‘ controls Separately for each

input channel (d)ECHO control for each channel (e)PAN control for echo

channel for left or right output (f) AUX Control : To control , level of the

channel in final mix to AUX sound output (g)Channel ON/OFF switch

(h)ECHO Section :- ECHO, reverb & Chorus effect can be added to all

input channel by different setting of Delay, Reverb & Level control Thirty Eight

(i)Tape section (j)Aux. send & return For sending Pre-feeder output of Thousand Six

196 channel for monitoring or adding a special effect unit (k)Mono / Stereo Nos 2.00 38,632.50 Hundred Thirty

output controls (m) Head phone output for monitoring purpose. Two Rupees Fifty

Technical specification: Paise

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Output

Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K

ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB (e)frequency

Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB ) (f)Equalization

Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line

Output Line Output Low : -10 dB / -2 dBM , Line Output High : 0 dBM /

+17 dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0 dB,

0.775V) The Console shall be mounted on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer with

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust

resistant sound column with Aluminium case & Aluminium mesh grille

impedance having frequency response 150-20000 Hz with following

Five Thousand

197 specifications (b) With 2 speakers having power handling capacity of Nos 2.00 5,050.00

Fifty Rupees

23W(MAX) & 15 W (RMS), each speaker have impedance of respectively

670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather & Dust

resistant ceiling/ wall mounted sound speaker with decorative case &

Seven Thousand

taps / impedance having frequency response 150-20000 Hz with

Five Hundred

198 following specifications (b) With 2 speakers having power handling Nos 4.00 7,575.00

Seventy Five

capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance of

respectively 670 ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms / 5W & 4 K. ohms

Eleven Thousand

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-605,

199 Nos 1.00 11,110.00 One Hundred Ten

GMB-6C or equivalent in Bosch /Shure etc.

Eighty Five

200 SPEAKER WIRE Mtr 500.00 85.85 Rupees Eighty

Five Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with Fifty Six Thousand

accessories etc. duly connected separately erected evaporating unit and Three Hundred

201 blower motor with its accessories by means of extra supplied proper Each 8.00 56,353.96 Fifty Three

insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Rupees Ninety Six

Friendly green gas charging and 15A plug top & Remote Control & MS Paise

Stand) with necessary core cutting. (1)For ISEER Range (KWH/KWH)(3.1

to 3.99) (C) for 1.7 to 2 ton capacity - Premium Cat.

Liaisoning work for additional load for requirement, electrical power Fifty Thousand

202 connection charges and inspector approval for power(to be paid to Lot 1.00 50,500.00 Five Hundred

concern electrical power supplier company) Rupees

Conventional type Smoke detector having following specifications : Dual

LED’s for 360 visibility. Advanced detection and communication protocol.

Easy installation and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54 Standard.

Operating Voltage : 10 ~ 28V DC. O O Operating Temperature : 0 C to One Thousand

37.8 C. Relative Humidity : 10% to 90% One Hundred

Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start Up Forty Six Rupees

Time : 30 Seconds. Thirty Five Paise

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote

Output : 15mA maximum open collector. Smoke Sensitivity : 0.10 to

dB/m. Thermal Rating : 57 C(135 F). complete with Junction box RAVEL

make cat no. RE326 2SL

Conventional type Fire Alarm Panel having Following specifications : CE

Approved. 16 X 2 Dot Matrix LCD Display. Standby battery backup with

built in charging. Switch Mode Power Supply. Tactile eypad for easy

panel operation. System ON indication. Low Battery visual warning with

audible ton. Fire / Fault status in unambiguous colored LED indication.

programmable relays for fire,supervisory and fault. All zones accept

smoke detectors and any normally open contact device. Any Zone can be Nine Thousand

configured as alarm or supervisory. Zone wise isolation and one man Five Hundred

walk test facility. Programmable Aux Outputs. Lamp test & Drill test Ninety Five

facility. 100 All Events log with RTC. Date / Time / Password Rupees

configuration. Programmable auto silence facility. Zone wise sounder /

contact optional). TCP-IP / GSM facility (optional). 120 / 230VAC + 10% -

15%, 60 / 50 Hz, 50W Operating Temperature 0 – 49° C / 32 – 120° F.

Storage Temperature 0 – 60° C Relative Humidity 93 ± 2% RH (non-

condensing) at 32 ± 2° C / 90 ± 3° F Charging voltage Charging current

V ± 5% 350mA (max) - RAVEL Make cat no. RE-102R

SITC of Hooter / Sounder as per following specifications : Operating

Voltage : 24V DC Operating Current : 40mA Sound Level : 85dB@1m

Operating Temperature : 0 – 49° C / 32-120° F. Sounder Type : Piezo Nine Hundred

205 Electric Type Tone Type : Fire Engine Siren Material : ABS Plastic Colour : Nos 3.00 949.40 Forty Nine Rupees

Red Dimensions : 96 H mm X 76 L mm X 28 D mm Back Box : 95 H mm X Forty Paise

75 L mm X 58 D mm Mounting Type : Surface / Flush Mount complete

with Back Box - RAVEL make cat no. RE24CS

SITC of Manual Call Point as per following Specifications : Operating

Voltage : 24VDC Operating Current : 30mA Colour : Green / Yellow / Red Eight Hundred

Material : Plastic IP Rating : IP-50 Size : 86 X 86 X 50 mm - RAVEL make Eight Rupees

Cat no. RE716 MR

Supplying, Installation, Testing and commissioning of Jockey Pump One Hundred

10.8M3/hour @70M Head.Horizontal Centrifugal End Suction. with Nineteen

207 M.S.fabricated common base plate, coupling, coupling guard, foundation No. 1.00 1,19,041.95 Thousand Forty

bolts etc. for motor and details pump specificaion follow as per One Rupees

specification as mentioned in tender volume.. Ninety Five Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Supplying, installation, testing and commissioning of electric driven

Monoblock Fire pump 960LPM at 70 m head 2900 RPM pump. suitable Two Hundred Fifty

for automatic operation and consisting of following: complete in all Two Thousand

208 respect as required. With Suitable HP, SQ cage induction motor TEFC Set 1.00 2,52,399.00 Three Hundred

type suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 Ninety Nine

protection for enclosure, horizontal foot mounted type with class 'F' Rupees

insulation, conforming to IS:

Five Hundred Fifty

Diesel Operated pump 70m head, 2900 RMP with day tank & battery set Five Thousand

complete with 100 ltr diesel Two Rupees

Seven Paise

Ninety Four

Control Panel for the operation of Jockey pump, Fire pump Electric and Thousand Nine

Fire pump Diesel with automation Hundred Ninety

Rupees Fifty Paise

Providing, fixing, testing & commissioning of Pressure Switches for

Two Thousand

automation of fire pumps. Pressure switches shall be double pole single

Four Hundred

211 throw type suitable for 3 phase supply with diaphragm. Aluminum Nos. 3.00 2,400.47

Rupees Forty

Enclosure with IP 66 protection follow as per specification as mentioned

Seven Paise

in tender volume..

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Ten Thousand

212 Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned Nos. 2.00 10,090.94 Ninety Rupees

in tender volume.. Ninety Four Paise

of size: 150mm dia.

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

Six Thousand One

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges,

Hundred Seven

213 Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned Nos. 2.00 6,107.98

Rupees Ninety

in tender volume..

Eight Paise

of size: 100mm dia.

Supplying, Installation, Testing and commissioning of C.I.Ball type Foot Eighteen

valve conforming to I.S:13095 class PN 16rating with Fittings, Flanges, Thousand Five

214 Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned Nos. 2.00 18,533.30 Hundred Thirty

in tender volume.. Three Rupees

of size: 150mm dia. Thirty Paise

Providing, fixing, testing and commissioning of C.I. Dual plate type Non- Eleven Thousand

215 Return Valve class PN 16 rating with fittings, flanges, nutbolts, washers, Nos. 2.00 11,041.19 Forty One Rupees

gaskets etc.of sizes: 150mm dia Nineteen Paise

Providing, fixing, testing and commissioning of Above Ground MS. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: Two Thousand

3589 (upto 200 mm dia. And above) including cutting, screwing, welding Three Hundred

216 etc. and providing all fittings like flanges, bends, tees, elbows, reducers, Meter 35.00 2,391.95 Ninety One

clamps, hangers etc. with painting of one coat of primer and 2 or more Rupees Ninety

coats of synthetic enamel paint of approved make / shade complete as Five Paise

per specification. 150mm dia

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing, fixing, testing and commissioning of Above Ground MS. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

One Thousand

3589 (upto 200 mm dia. And above) including cutting, screwing, welding

Seven Hundred

217 etc. and providing all fittings like flanges, bends, tees, elbows, reducers, Meter 15.00 1,744.20

Forty Four Rupees

clamps, hangers etc. with painting of one coat of primer and 2 or more

Twenty Paise

coats of synthetic enamel paint of approved make / shade complete as

per specification. 100mm dia.

Providing, fixing, testing and commissioning of Under Ground M.S. ERW

Three Thousand

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

Two Hundred

3589 (upto 200 mm dia. And above) with IWL/pypecoat, 4mm thickness

218 Meter 10.00 3,265.73 Sixty Five Rupees

wrapping and coating and providing all fittings like flanges, tees, elbow,

Seventy Three

fasteners with all follow as per specification as mentioned in tender

volume.. 150mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

Three Hundred

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

Sixty Three

219 with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 80.00 363.56

Rupees Fifty Six

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 25 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges Four Hundred

220 with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 40.00 459.50 Fifty Nine Rupees

welding,threading,jointing. And Excluding cutting holes in wall Fifty Paise

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

Five Hundred

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

Seventy Five

221 with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 25.00 575.64

Rupees Sixty Four

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 40 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

Seven Hundred

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

Ninety Seven

222 with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 15.00 797.82

Rupees Eighty

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 50 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges Nine Hundred

223 with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 15.00 949.31 Forty Nine Rupees

welding,threading,jointing. And Excluding cutting holes in wall Thirty One Paise

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 65 mm dia

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete

One Thousand

with all fittings (butt welded) such as elbow, socket, tees, unions, flanges

Two Hundred One

224 with hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 30.00 1,201.78

Rupees Seventy

welding,threading,jointing. And Excluding cutting holes in wall

Eight Paise

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 80 mm dia.

Three Hundred

Providing fixing testing and commissioning of GUN METAL 15 mm size

Ninety Nine

225 quartzoid bulb type sprinklers, set to operate at 57 degree Centigrade. Nos. 85.00 399.96

Rupees Ninety Six

Pendent type type with required accessories complete. (GUN METAL)

One Thousand

Supplying , installation, Testing & commsioning of Flexible Drop Five Hundred

1000mm Fourteen Rupees

Eighty Five Paise

Providing, fixing, testing and commissioning of RRL Fire delivery hose

Six Thousand Five

mm Dia in 15 mtrs length with ISI MARKS is 636 type ‘A’ Fitted with

Hundred Two

227 Stainless Steel male & female coupling ISI Mark IS :903 duly binned with Nos. 4.00 6,502.28

Rupees Twenty

copper wire winding follow as per specification as mentioned in tender

Eight Paise

Supply installation ,Testing & commissioning of single headed oblique

Seven Thousand

pattern ISI hydrant landing valve with 80 mm dia flanged inlet & 63 mm

Six Hundred Fifty

228 dia instantaneous type female outlet complete with PVC cap and chain, Nos. 2.00 7,650.75

Rupees Seventy

twist release type lugs WITH all accessories as per SI Standard

Five Paise

Conforming to IS-5290. (SS 304- Body SS-304 Coupling)

Six Thousand One

Providing, fixing, testing and commissioning of weatherproof standard

Hundred Eighty

fire Hose Cabinet wall mounting type 18 Gauge. (750 x 600 x 250) having

229 Nos. 2.00 6,189.79 Nine Rupees

Double Opening with M.S. fabricated stand, necessary lock & key

Seventy Nine

arrangement follow as per specification as mentioned in tender volume..

Seven Thousand

Supply installation ,Testing & commissioning of SS Fire Brigade

Six Hundred Fifty

230 connection consisting of 2WAY. 63 mm instantaneous type male No. 1.00 7,650.75

Rupees Seventy

coupling with 125 mm Dia. flanged outlet complete for fire water tank.

Five Paise

Eleven Thousand

Supply installation ,Testing & commissioning of SS Fire Brigade

Seven Hundred

231 connection consisting of 4WAY. 63 mm instantaneous type male No. 1.00 11,731.15

Thirty One Rupees

coupling with 125 mm Dia. flanged outlet complete for fire water tank.

Fifteen Paise

Ten Thousand

Providing, fixing, testing and commissioning of Wall mounting Fix type

Eight Hundred

First aid Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS :

232 Nos. 2.00 10,877.20 Seventy Seven

Type II fitted wit SS Shutt off Nozzle follow as per specification as

Rupees Twenty

mentioned in tender volume..

Four Thousand

Supply installation , testing & commissioning of ISI Standard SS-304

One Hundred

branch pipe with nozzle of 20mm nominal bore outlet as per IS:903

233 Nos. 2.00 4,182.41 Eighty Two

suitable to fit with standard instanteneous type 63mm dia coupling (SS-

Rupees Forty One

Two Thousand

Two Hundred

Supply installation testing & Commissioning of 25 MM dia Air Realese

234 Nos. 2.00 2,294.72 Ninety Four

valve complete in all respects. (GUN METAL)

Rupees Seventy

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Two Thousand

Three Hundred

Supply installation testing & Commissioning of Pressure guage 4" dial

235 Nos. 2.00 2,397.24 Ninety Seven

to 16 kg/cm2 with syphon and cock complete in all respects (SS-304).

Rupees Twenty

Four Paise

Supply installation testing & Commissioning of 25 MM dia Ball Valve (SS- Nine Hundred

236 304) complete with SS Ball with single handed lever complete in all Nos. 2.00 969.10 Sixty Nine Rupees

respects. Ten Paise

Providing & Installation of ABC Stored Pressure Type Fire Extinguisher 6 Two Thousand

Kgs. capacity bearing ISI Mark for Fighting ABC Class of Fire. The Three Hundred

Extinguisher will be Manufactured Strictly as per BIS: 15683:2006 bearing Fifty Five Rupees

ISI. Mark follow as per specification as mentioned in tender volume.. Seventy Two Paise

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity, made

Five Thousand

from the brand new seamless cylinder, as per IS: 7285 and CCE approval,

Four Hundred

238 fitted with a Discharge hose and horn and wheel type valve with initial Nos. 5.00 5,456.63

Fifty Six Rupees

Charge as per IS: 15683:2006 specification, bearing ISI Mark follow as per

Sixty Three Paise

specification as mentioned in tender volume..

Four Thousand

Providing & fixing Modular type ABC Dry Powder Fire extinguishers

Four Hundred

litre capacity Fire Extinguishers. The Extinguisher will be Manufactured

239 Nos. 5.00 4,447.03 Forty Seven

Strictly as per BIS: 15683:2006 bearing ISI. Mark follow as per

Rupees Three

specification as mentioned in tender volume..

Four Hundred

Providing, fixing, testing and commissioning of On -Off Switch follow as

240 Nos. 3.00 408.65 Eight Rupees Sixty

per specification as mentioned in tender volume..

Five Paise

Two Hundred

Providing, fixing, testing and commissioning of below Auto Glow

Thirty Three

241 Signages follow as per specification as mentioned in tender volume.. Nos. 2.00 233.17

Rupees Seventeen

Emergency Exit 4” X 12”

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Thirty Thousand

Getting of Fire Fighting System Approval from local fire authority with all

242 Job. 1.00 30,300.00 Three Hundred

other charges and documentations for getting No Objection

Certificate.(as per GMB Approved rate)

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing) having

mm thick marina plywood IS 710 grade both side on aluminum framing

of gauge 16. Aluminum framing size for vertical & horizontal support is

50 mm x 25 mm. Grid of aluminum framing is 600 mm x 600 mm. All

exposed surfaces finished with 1 mm thick Laminate of approved shade

complete with mat finish. Necessary framing to be erected above false

ceiling. No extra cost to be paid for the same. Before installation, make

Six Thousand Six

hole/face plate for conduit pipes of electrical / networking cables with

Hundred Twenty

243 open able stud from partition Including all materials and labor etc. Make Sqm 4.00 6,620.55

Rupees Fifty Five

necessary grooves as per shown in drawing. Using of 12 mm thick clear

glass with proper crystal edges & with suggested frosted films on glass.

All joints are covered with teakwood beading Patti finished with polish

matching with laminate. Including door of same design if required

Complete with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Architect/consultant/Engineer In

charge. Contractor has to provide all necessary cut outs (race ways.) for

Electrical works & no extra payment shall be made for it.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Providing and fixing eco-friendly light weight calcium silicate false ceiling

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% noncombustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043°

w/m KC.for the best thermal Insulation . The Light weight calcium Silicate

tile shall be of approved texture Fine fissured/ Spintone/Cosmos having

NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level suspended inter

One Thousand Six

locking metal grid of hot dipped galvanized steel sections (galvanizing

Hundred Seventy

244 @120 grams per sqm at joints to get required length and size of Sqm 66.00 1,674.15

Four Rupees

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre

Fifteen Paise

to centre, and centre to centre to form agrid of 1200X600mm and

secondary thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on

periphery walls/partitions on a perimeter wall angle pre-coated steel of

size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the

help of rawl plugs at 450mm centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid

Providing & fixing work station / table having ht of 750 mm Top, with

MS Pipe Structure of Frame as per Architect/ Engineer Design or

also made up of 19mm Thick. Top of Table is 19mm thk ply with laminate

Finish Per Requirement and All internal & external Joints finished with Twenty Four

teakwood beading Patti. Common or front Part of Table is Sectationized Thousand Eight

245 with MS Perforated Sheet. All exposed and internal surfaces covered Sqm 42.00 24,870.53 Hundred Seventy

with Laminate Finish of approved shade & Complete as per detail Rupees Fifty

drawings & as instructed by Architect/consultant/ Engineer In charge. Three Paise

Complete with all necessary hardware like nails, ss screws, table chain,

Key board trey, TDS channel, adhesives etc. Contractor has to provide all

necessary cut outs for Electrical works & no extra payment shall be made

Providing & fixing office table / staff table having ht of 750 mm Top,

with 19mm thk plywood or MS pipe Structure as per Architect/ Engineer

19mm Thick. Top of Table is 19mm thk ply with laminate Finish Per

Requirement and All internal & external Joints finished with teakwood

Twenty Nine

beading Patti. Item includes fixing of drawers and keyboard tray and

Thousand Three

storage with shutters under table as per drawing. With grooves shown

246 Sqm 8.00 29,350.96 Hundred Fifty

as per drawing. All exposed and internal surfaces covered with Laminate

Rupees Ninety Six

Finish of approved shade & Complete as per detail drawings & as

instructed by Architect/consultant/ Engineer In charge. Complete with

all necessary hardware like nails, ss screws, table chain, TDS channel,

adhesives etc. Contractor has to provide all necessary cut outs for

Electrical works & no extra payment shall be made for it. All ply should

follow IS

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600

mm, having skirting of 75 mm, including vertical supports & horizontal

shelves shown as per drawing made by 19 mm thick Marin ply, Open

Front Side for Selves with using 12 mm thick Marin ply for framing. All Ten Thousand

complete with proper teakwood beading and Teakwood molding as per Three Hundred

247 design. Back ply is 12 mm Marin ply. All exposed are covered with 1 mm Sqm 60.00 10,381.62 Eighty One

thick Laminate & internal surfaces are covered with 1 mm thick Rupees Sixty Two

laminate. External & internal joints covered with beading Patti complete Paise

with polish finish. With grooves shown as per drawing. All complete with

proper hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS

304 etc. All Details as per shown in detail drawings & as per instructions

of architect/consultant / in charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks.

includinf of vertical supports & horizontal shelves shown as per drawing

made by 19 mm thick Marin ply, having shutters of 19 mm thick ply or

Clear Glass with using 12 mm thick Marin ply for framing. All complete Thirteen

with proper teakwood beading. and Teakwood molding as per design. Thousand Eight

248 Back ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Sqm 41.00 13,815.77 Hundred Fifteen

Laminate & internal surfaces are covered with 1 mm thick laminate. Rupees Seventy

External & internal joints covered with beading Patti complete with Seven Paise

Polish finish. With grooves shown as per drawing All complete with

proper hardware like locks, S.S. Screws, MS Nails, Magnets, table chains,

cable manager SS 304 Handles of 250 mm and 100 mm dia etc. All

Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Notice Board / Pin Board Seven Thousand

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Two Hundred Fifty

Arrangement complete as per drawing and Directed by Engineer In Nine Rupees

Charge etc complete. Thirty Eight Paise

Providing and fixing News paper stand size 650 x 820 x 1200 or required

height made out of 18 mm wtr.prf. [MR Grade] ply with 1 mm. thk

inner laminate for top including back panel with shelves for magazine

Thousand Forty

250 and news paper as shown in drawing, all expose joints finish with Nos 2.00 13,044.62

Four Rupees Sixty

teakwood beadsing patti with polish finish and provision of openable top

for news paper storage complete as per detailed drawings and Engineer-

In Charge and Architect

Supplying and providing reading chairs with PP arms with soft PU pads,

Seat and back upholstered with cushioned and MS powder coated frame

and cantilever legs. Overall dimension 590 L x 600 W x 915 H (Or as Six Thousand Sixty

specified) complete as directed by architect and product as per given Rupees

specification. Complete as per architectural design and concept and

approved by Architect & Client.

Supplying and providing High Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest Ten Thousand

-Fixed Arm rest Seven Hundred

252 -Knee tilt mechanism Nos 1.00 10,738.07 Thirty Eight

-360 swivel motion/ 100mm stroke gas Rupees Seven

-Nylon Star base Paise

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Supplying and providing Mid Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

Five Thousand

-Center tilt mechanism

Twenty Four

253 -100mm class 4 gas lift Nos 8.00 5,024.65

Rupees Sixty Five

-PP Fixed Arm rest

-Nylon Star base/Twin wheel nylons casters

-Complete as per architectural design and concept and approved by

Architect & Client.

Five Hundred Fifty

Supplying and providing dust bin made of 100% virgin plastic with

254 Nos 5.00 557.52 Seven Rupees

paddle. Capacity-10 to 15 Ltr.

Fifty Two Paise

One Thousand

Supplying and providing dust bin made of 100% virgin plastic with Five Hundred

paddle. Capacity-120 L Sixty Eight Rupees

Three Paise

Blinds : Providing and fixing as per approved make manual roller blinds

with Soltis fabric & spring drive system with steel ball chain/one touch

with speed control action roller blind with end brackets with head ail,

components, bottom bar.Color-Alu with manual operation and

warranty etc as per manufacturer’s specifications. Fabric to be as per

approved sample. All the work complete as per the detailed drawing and

instruction of Architect/EIC. Soltis-99-Color-Alu fabric: 39%

One Thousand

Polyester/61% PVC with Aluminum Backing. Weight:290 g/sqm,

Nine Hundred

256 Thickness:0.32 mm, Openness Factor:3%, Visible Light Transmission (N- Sqm 115.00 1,962.94

Sixty Two Rupees

N): 2%-4%, Solar reflection (white) 65%, Internal Solar Factor (gtot): 0.35 -

Ninety Four Paise

0.48, Tensile Strength (Warp/Weft):160/170daN/5cm,Tearing

Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree

Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. All

complete as per approval of designer & instruction of Project Manager.

(The mode of Measurement: The size of the blind will be measured from

end to end bracket (Left to Right bracket) & height will be measured

from top of the pelmet till the bottom of the bottom bar

One Hundred Fifty

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with

Thousand Nine

257 proportionately base dimenstion as per approved design by client and Nos 1.00 1,50,995.00

Hundred Ninety

complete as per instruction of engineer-in charge and consultant.

Five Rupees

Two Thousand

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden Four Hundred

258 frame of size 2in x 1in consisting 6mm thick ply in back with digital vinyl Nos 30.00 2,497.23 Ninety Seven

printing and 5mm thick glass on top if required. Rupees Twenty

Three Paise

One Hundred Two

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 x

Thousand Sixty

259 2160 pixels with HDR TypeHDR 10+ complete as per approved make and Nos 1.00 1,02,067.57

Seven Rupees

Fifty Seven Paise

Fifty Nine

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb Thousand Seven

260 RAM DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE 2021 Nos 8.00 59,748.35 Hundred Forty

STUDENT, Full HD display of 21 to 23.8' with keyboard and mouse. Eight Rupees

Thirty Five Paise

Sr. Qty. May Tender Rate

Description of Item Unit Total Amount (Rs.)

Description of Item Unit Total Amount (Rs.)

No. More Or Less Rate In Figure Rate In Words

Fifteen Thousand

Providing and fixing Automatic Duplex laser printer with 30 pages per

One Hundred Fifty

261 minute print speed, 8 mb memory, Large 250 sheet paper tray with USB Nos 1.00 15,157.58

Seven Rupees

connectivity.

Fifty Eight Paise

Supplying and providing xerox machine- -20PPM Copy / Print /Color Scan Fifty Eight

262 / Duplex DADF /Single Nos 1.00 58,075.00 Thousand Seventy

Tray Five Rupees

Ninety Two

Providing and fixing Directional and Informative Signages- SS Plate,

Thousand Four

Grade 304, Brush finish, 2mm Thickness with smoothen corner edges,

263 Sqm 1.50 92,434.12 Hundred Thirty

Acid etching with duco color, SS studs 1.5' away from wall.fitting as per

Three Rupees

dirction of Architect and EIC

Twenty Four Paise

Providing and Fixing Library Name in Gujarati Letter SS304 1mm thick

Thousand Five

264 letter 1.5" depth 10" Height with Duco color & fitting as per direction of Nos 1.00 52,520.00

Hundred Twenty

Architect & EIC.

Total Amount

Total Amount

Total Amount Rs. =

Total Amount Rs. =

Rupees Two Crore Fourty Eight Lakh Thirteen Thousand Five Hundred Twenty four and Eighty Two Paise Only

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in figures & words) of the estimated rates mentoined above.

Amount of my/our tender work out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Rs……………………………………………… Add……………………..……..% above Rs…………………..………………………

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as

4 stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal