Boys middle schoo Goosu major repair 1631

Providing and fixing aluminium work for doors, windows,ventilators,and partition with extruded built up standardtabular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, FIXED WITH DASH FASTENER of required dia and sizeincld. neccesary filling of gaps at junctions i.e, at top,bottom and sides with reqd. EPDM rubber/neoprene gasket felt etc.Almunium should be straight,smooth, rust free, mitred and jointed mechanically whenever reqd. incld. cleat panelling,CP brass/stainless steel screws all complette as per architechtural drawings and te directions of EIC. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing and fixing of ACP sheet 3mm thick of approved make including framework of aluminium beading/aluminium tube wherever necessary complete job. All as per directions of EIC

Providing and fixing panelled or panelled and glazed shutters for doors and windows and clerestory windows incld.ISI marked black enamelled M.S Butt hinges with necessary screws excluding panelling thick 35mm imported wood

Providing glass panes 3.5mm thick for windows,clerestory windows shutters (Area of opening for glass panes excld. portion inside shall be measured.

Providing and laying in position cement concrete specified grade of reinforced cement concrete including curing but excluding the cost of centering and shuttering ,finishing and reinforcement. All works upto required level. 1:1.5: 3 (1 cement: 1.5 Coarse aggregate sand : 3 Graded stone aggregate 20mm nominal size) incld carraige of all materials involved.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and shuttering including proping, strutting & removal of the same for suspended floors

Centring and shuttering including proping, strutting & removal of the same Foundations, footings, bases for columns

Providing and laying vetrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08% and conforming to IS 15622 of approved make,in all colours and shades , laid on 20mm thick cement mortar 1:4 ( 1 cement,4 sand) including grouting the joints with white cement and matched pigments, size 600mmx600mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Applying priming coat wuth ready mixed pink or grey primer of approved brand and manufacture on wood work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge.

P/F of 12mm thick heavy duty Ornammental hardware items incl cost necessary Lor crews etc

Tower Bolts 100mm

Handles 100mm

P/F stainless steel A ISI 304 (18/8) kitchen sink as per I.S 13983 with C.I brackets AND STAINLESS STEEL plug 40mm including painting of fitting and brackets, cutting making good the walls whenever required. 510x1040mm bowl depth 250mm

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 20mm OD(SDR-7.4)

P/F of Stainless steel heavy duty Angle valve of standard make

P/F 15mm nominal bore of standard back type C.P Brassclose hole basin mixer pillar ta of approved brand

P/F of PVC connections of standard make

P/F SWP 100mm dia. PVC class B (10' long) of standard make

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete fixed to openings/wooden frames by welding

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)