e-tender for the Supply and Installation of Modular Kitchen at Thiruvananthapuram

e-tender for Installation of Modular Kitchen at Thiruvananthapuram For more details refer tender documents

Pot Rack-3 Tier of size1000x600x1500mm SS 304 Grade Sq.pipe Frame Work.25x25Sq.Pipe.All Tiers are Equalent

Pot Rack-3 Tier of size 1300x600x1500mm SS 304 Grade Sq.Pipe Frame Work.25x25Sq.Pipe.All Tiers are Equal

Nylon Cutting Board (SquareModel) Of size 600x600x850 mm Top 50mmThick Nylon Cutting Board With SS Frame attached

Sink with Table Unit,Bottom Cross Supports And Rear Splash of size 2350x600x(850+150)mm:SS 304 18G SunkIn Top Front & amp; Right Side Turned Up 75Mm Returned 40mm AndIn 12Mm.Left Side 6 Mm Projected Out And 10mm.Rear Side Raised Splash Of 150 Mm High,Top Welded To 32x32x3Mm Thick SS. sheet Frame work 1No.Of SS 304 18G- 1Sink 450x450x300Mm Deep,Fitted OnThe Right Side With 1-1/2 & quot; Bsp Waste Coupling Integral With Top. Center Line Of Sink Waste Shall Be Properly Positioned From Edge Of Table.SS 304 16G 40x40MmFour No’s Of Sq.Tubular Legs With Adj. Bullet Feet. Legs Shall Be Welded At Top To The S.S. Angle Frame work And Shall Be Positioned From The Table Ends. SS 304. 25x25Mm Tubular Cross Bracing

Rice cooker(25KG) Brand:lekshmi Tiltingmodel Capacity:25kg Innervessel:24"x24" Outervessel:30"x32" Vessel:1.6mm thickness Outerjacket:1.2mmthickness Vessellid:1.2mmthickness Ricefilter:1.2mmthickness Stand:1.5"x1.5"squarepipe

Tilting grinder(10L) Brand : Lekshmi SS 304 16 Swg SS Drum Revolving Drum,Grinding Stone, Frame All SS Motor: Crompton/Abb Ele: 0.5 Hp/3Ph/50Hz SIZE : 10 L

Tilting grinder(15L) Brand : Lekshmi SS 304 16 Swg SS Drum Revolving Drum,Grinding Stone, Frame All SS Motor: Crompton/Abb Ele: 0.5 Hp/3Ph/50Hz SIZE : 15 L

DOUGHKNEADER(15Kg) Brand: Lekshmi Weight Approx.:100 Kg Capacity Approx.:15 Kg Electric Motor:1HP RPM:1440 RPM Voltage:220 V Power Consumption:0.75 Unit Cycle Time:10to15Min Type:Semi-Automatic Material:Stainless Steel & MS Base

Hot Plate And Rear Splash of size 1500x800x(850+150) mm: Top 16mm thick hot plate 150mm high raised splash on rear. Both sides of top rolled down 50mm flush with body cladding. Work top to over hang the base body by 40mm from front and 75mm at rear.SWG 20G(304) SS on all sides with air vents on both sides.40x40 SQ.PIPE & amp;25x25x3 MM SS Angle boxed frame under support. Cooking top of 20mm thick polished MS plate with 75 mm raised rear and side edges with grease collecting troughin front and grease collecting drawer.2Nos.ofV-600 burners(40,000btu/hr).16SWG, 40x40mm SS Square pipe legs with adjustable SS bullet

Marble table Rear Splash of size 1800x700x(850+150)mm: Top Granite Double Beeded On 3 Sides rein forced with 32x32x3mm Thick SS sheet Frame.18G SS 150Mm Splash on rear.1Nos20G SS Under shelf Down Beeded On All Sides supported with.4 Nos16G SS 40x40mm 18G SS Square Pipe Legs With Adj.SS bullet feet

3 in1Bulk Cooking Range of size750x750x450 mm: Matt Finish Sheet.Three Nos.of Model-4Burner.Four Side Half Covering. 16 SWG,40x40 mm SS Square pipe legs with adjustable SS bullet

Bulk Cooking Range of size 600x600x450mm: Matt Finish Sheet.One number of Model-4 Burner. Four Side Half Covering. 16 SWG, 40x40 mm SS Square pipe legs with adjustable SS bullet

Single Sink Unit Of Size600x600x850+150 mm: Matt Finish Sheet;150 mm Splash Back;Heavy Sink Of Size 40x40 cm Attached;Attached Bottom Cross Support; Leg Use 40x40 mm Sq.thube With Adjustable Nylon Boo

Two Burner Cooking Range With Bottom Shelf And Splash, of size 1146x600x(850+150) mm: 18G SS 40 mm top Down Beeded On 3 Sides with 32x32x3Mm Thick. Boxed SS Angle Frame under support.18G SS Splash of150 mm high from work top.Rear top to be recessed to forma. pressure burner & amp;1No.T-35 Burner.1No.of T 22 Burner .1No Heavy duty 425 mm Dia castiron vessel rest suitable for wok with sufficient airvents..20G SS On Both Sides And Rear With Airvents & amp;front 18G SS with control knobs.20G SS Under shelf Down Beeded On All Sides. 4 No & rsquo;S 40x40 mm16G SS Pipe Legs With Adj. Nylon Bullet Feet

Three Burner Cooking Range With Bottom Shelf And Splash, of size 18G SS 40 mm top Down Beeded On3Sideswith 32x32x3Mm Thick.Boxed SS Angle Frame under support.18G SS Splash of 150mm high from work top. Rear top to be recessed to forma.pressure burner & amp; 2 No.T-35 Burner.1No.of T22 Burner.1No Heavy duty 425mm Dia castiron vessel rest suitable for wok with sufficient airvents. 20G SS On Both Sides And Rear With Air vents & amp; front 18G SS with control knobs. 20G SS Under shelf Down Beeded On All Sides.4 No & rs quo;S 40x40mm16G SS Pipe Legs With Adj. Nylon Bullet Feet

Small Table With Rear Splash of size 600x600x(850+150)mm: 18G SS Work Top.18G SS Splash on rear.Bottom Cross Support. 4Nos 16G SS 40x40mm SS Square PipeLegs With Adj.SS bullet feet

Work table Of Size 1500x600x850mm: Matt Finish Sheet;Top Made of18G SS Sheet;One20 G SS Under Shelf Down Beeded On All Side Support;4 Nos. Of 16G SS 40x40MM Square PipeLegs With Adjustable Nylon Boots

Work table Of Size 1500x600x850mm: Matt Finish Sheet;Top Made of 18G SS Sheet;One20G SS Under Shelf Down Beeded On All SideSupport; 4Nos. Of 16G SS 40x40MM Square Pipe Legs With Adjustable Nylon Boots

Heavy work table Of Size 2350x750x850mm: Matt Finish Sheet;Top Made of18G SS Sheet;One20G SS Under Shelf Down Beeded On All Side Support; 4Nos. Of 16G SS 40x40MM Square Pipe Legs With Adjustable Nylon Boot

Heavy work tableOf Size 2350x750x850mm: Matt Finish Sheet;Top Made of 18G SS Sheet; One 20 G SS Under Shelf Down Beeded On All Side Support; 4Nos. Of 16G SS 40x40MM Square Pipe Legs With Adjustable Nylon Boots

Heavy work table Of Size2350x750x850mm: Matt Finish Sheet;Top Made of 18G SS Sheet;One20G SS Under Shelf Down Beeded On All Side Support; 4Nos. Of 16G SS 40x40MM Square Pipe Legs With Adjustable Nylon Boots

Bain Marie Of Size 1200X670X850 mm ht-Electric Top 18G Food Pick Up Counter With One Under Shelf 20 G, Three Sides Covering And (6Nos.1/2X150 mm Deep Gn Pans With Lids) Tray Slider : Entire equipment including under frame shall be made of SS 304.The tank of the Bain Marie shall be provided with an on & dash; line connection Water sensor to be provided in the unit for preventing the heating element getting damaged due to no water. 3 kw water immersion heaters with rotary On & dash; OFF switch ,indicating lamps and imported thermostat.It shall be provided with 2 meter supply cord with industrial top

WALL MOUNTED HOOD Wall mounting type Exhaust Hood made of 20swg.SS 304 sheet with detachable baffle filter and oilcollection tray made of 22 swg.SS304 sheet including all necessary structural supports required at Site .Size:1650*900*450mmHt

WALL MOUNTED HOOD Wall mounting type Exhaust Hood made of 20swg.SS 304 sheet with detachable baffle filter and oil collection tray made of 22 swg.SS 304 sheet including all necessary structural supports required at Site.Size:1200*900*450mmHt

WALL MOUNTED HOOD Wall mounting type Exhaust Hood made of 20swg. 304 sheet with detachable baffle filter and oil collection tray made of 22swg. SS304 sheet Wall mounting type Exhaust Hood made of20swg.SS including all necessary structural supports required at Site.Size:2000*900*450mmHt

WALL MOUNTED HOOD Wall mounting type Exhaust Hood made of 20swg.SS 304 sheet with detachable baffle filter and oil collection tray made of 22 swg.SS 304 sheet including all necessary structural supports required at Site.Size:1500*900*450mmHt

MS Rack of size 6'Lx3'Wx15"D made with1.25" square tube andcovered with PVC laminated sheet

GI DUCTING WORK[ sl.no.28.01 to 32.01] EXHAUST GI DUCTING WORK Fabrication and erection of GI ducting 0.7mm thick Jindal sheet & Hood erection from ceiling

7½ Hp BLOWER FOE EXHAUST

FRESH AIR GI DUCTING WORK Fabrication and erection of GI ducting 0.7mm thick Jindal sheet & Hood erection from ceiling

½ Hp AXLE FLOW FAN FOR FRESH AIR

FRESH AIR GRILL

LPG INSTALLATION WORK[sl.no.33.01 to 47.01] Q C Compact Valve

Cylinder Pig tails

Header 6 Pig tail Thread-1/2MS Coupling-3/4 Header-1 "C Class Pipe-3 Feet

High Capacity Pre set LPG Regulator(25Psi)

Manifold Valve Venue Make

Shut Off Valve(5Psi)

Main Line Valve(5Psi) Safety Valve

Dbc Copting Pig Tail

1/2 Coupling MS

Stove Pig Tail

Pressure Meter

Pressure Meter Valve

Pin Set & Nut Copper

Pipe Clamp MS

1/2 C Class Tata Pipe Seamless(Rft)

Electrical cabling

Plumbing Fittings

sink tapbranded